| Content | Converts to DC 9 V for use with virtually all stomp boxes and effects pedals
Typical DC-type 2.2 mm plug with negative tip and positive sleeve
Provides a generous 1000 mA current to power even digital products
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
Use our new general purpose DC 9 V power adapter PSU-SB to power virtually all your guitar or bass guitar stomp boxes and effects pedals.
This adapter provides a generous 100 mA current to power even digital products. For connection, it features a typical DC-type 2.2 mm plug with negative tip and positive sleeve.
This universal power supply gives you ultimate power for your most demanding gigs
Features: Converts to DC 9 V for use with virtually all stomp boxes and effects pedals Typical DC-type 2.2 mm plug with negative tip and positive sleeve Provides a generous 1000 mA current to power even digital products suitable for: CO600, UW300, XD300, CL9, OD400, SM400, UV300 und UZ400
- Power Adapter
- 100-240V AC, 50-60Hz
- 9V DC
- 1000mA
- Sleeve: Positive, Tip: Negative
- Behringer Guitar Pedals
- 2.2mm Barrel
Compatible with modelas Boss PAS120S, PSA120ZS.
Please note this is a European power supply. |
The PWT12 is universal pedal board power supply with 12 outputs electrically isolated in pairs. Outputs 1 - 8 provide 9 V DC each with a maximum current draw of 250 mA per pair. Outputs 7 and 8 additionally feature a polarity switch to change the center pin from negative to positive (and the barrel to negative).
Outputs 9/10 provide 18 V DC each with a maximum current draw of 125 mA. Additionally, the upper output is switchable to 12 V DC. Providing 9 V DC/250 mA, outputs 11/12 are also switchable to 12 V AC. The green indicator LEDs turn red when alternative ouput voltages are selected.
All output pairs are individually protected against shorts and overload. When a fuse trips the LED indicator of the corresponding pair goes out. After the fault condition has been removed the fuse is automatically reset, and within a few seconds the output resumes operation indicated by the illuminated LED.
The toroidal transformer and the steel housing of the PWT12 provide smooth FX operation free of interference and hum pickup. Mains power input is switchable between 115 V and 230 V.
The PWT12 features two brackets for easy pedal board mounting while a cover plate protects the DC plugs. The DC cables can be fixed to the plate with cable ties for strain relief. The PWT12 comes with a set of 12 long DC cables.
Technical Specifications- Universal power supply for effect pedals
- 12 outputs on barrel-style DC connectors with 2.1 mm center pin
- regulated DC output, all outputs electrically isolated in pairs
- Outputs 1/2, 3/4, 5/6: 9 VDC each, 250 mA per pair, center pin negative, green LED indicators
- Outputs 7/8: 9 VDC, 250 mA/pair, switchable polarity, two-color LED, green = center pin negative, red = center pin positive
- Outputs 9/10: 2x 18VDC (LED = green), switchable to 1x 12VDC / 1x 18VDC (LED = red), maximum current 125mA/pair, center pin negative
- Short circuit protection per pair with automatic reset
- 115 V / 230 V switchable
- Mains fuse: 5 x 20 mm fine wire, 115 V = T 500 mA; 230 V = T 250 mA
- Toroidal transformer, 20 VA continuous
|
User\'s manual
Palmer MI PWT 05 MK 2
Universal 9V Pedalboard Power Supply 5 Outputs
- Universal 9 volt DC power supply
- 5 outlets with ultra stable 250 mA each
- Isolated
- Overload protection
- Roadworthy enclosure
- Mounting and strain relief options
- Power, merge and daisy chain cables included
With a stable 250 mA on each of the five center negative barrel style outlets the compact Palmer PWT 05 MK2 is most suited to virtually any pedalboard size. To deliver clean DC power to your pedals and eliminate ground loops between them and the associated hum the outlets are isolated.
The PWT 05 MK2 is protected against overloading and comes with 25 and 50 cm long connection cables, as well as two Y-cables. The first one, with a black connector, connects two 9 V outputs to increase the current intensity to a massive 500 mA, the other one, with a white connector, connects two 9 V outputs to double the voltage to 18 V.. Also included is a 1-into-5 daisy chain that lets you power five pedals from one output if their total current draw does not exceed 250 mA. The rugged enclosure of the Palmer PWT 05 MK2 provides mounting and cable relief options while the IEC mains inlet and voltage selector enable worldwide use.
Product type
Power Supplies
Mains connector
IEC socket
Input voltage
230 V
Outputs
5
Output connectors
2.1 x 5.5 mm
Output voltage
9 V
Max. output current
each output 250 mA
Isolated outputs
yes
Polarity
center negative
Cord length
25 - 50 cm
Indicators
Overload , Power
Controls
mains switch (on/off) , voltage selector switch
Width
105 mm
Depth
140 mm
Height
45 mm
Weight
1,5 kg
|
T-Rex ToneTrunk Road Cases are designed for players who require maximum protection for their pedalboards. Rugged and sturdy, our Road Cases offer many of the benefits of a custom-made case at a more budget-friendly price. The design makes set-up/tear-down a breeze: just take off the lid, plug your cables in, and rock out! Or, if you prefer a lower board height, you can remove the ToneTrunk board (included) from the Road Case base and put it directly on the floor. The removable wooden panel in the base gives to you access to a convenient accessory storage compartment underneath - perfect for cables, strings, winders, tools, picks , etc. This makes the Road Case one big tool box containing everything you need on the gig, board size 56 x 31.6 mm
Type:
|
Product Features: - 1.7 A current capacity can power more than 20 effects pedals, keyboards and other DC 9 V gear*
- Supplied with a full complement of connectors and jumper cords for total compatibility
- Includes 4 assorted jumper cables and 2 daisy-chain cables each with 5 connectors
- Takes up only one outlet space and frees up more room for your pedals
- Runs on any AC power supply from 100 - 240 V; worldwide usability without transformer
- Transformerless design eliminates 50/60-cycle hum and extraneous noise
- High-quality components and exceptionally rugged construction ensure long life
|
4,5 Volts Power Supply for KORG PX4 and PX4R.
|
Reviews
There are no reviews yet.