| Content | Beyerdynamic DT 880 Edition 32Ω Hi-Fi Semi-Open Headphones
DT 880 Edition 32Ω Hi-Fi semi-open headphones with single sided cable.
- Frequency response: 5Hz - 35kHz
- Max input power: 100mW
- Max SPL: 96dB (nominal)
- Impedance: 32Ω
- Connector: 3,5mm stereo (1/8“) with adapter 6,3mm (1/4“)
- Cable length: 3m
- Weight: 290g (without cable)
Gategory Wired
Type Semi Open
Place Over Ear
Impedance 32Ω
Max. Input Power 100mW
Frequency Responce / Sensitivity 5Hz - 35kHz
Pressure Level 96dB
Built-In Microphone No
Volume Control No
Cable Length 3m
Detachable Cable No
Connector 3.5mm Stereo Jack
Packaging Includes Spare Sponges - Earpads, Adapter 1/8" σε 1/4“, Carrying/Storage Case
Colour Black,Grey
Weight 290g | DT770 Closed headphone for drummers and monitoring purposes (FOH), with extreme isolation against ambient noise.
The dynamic, closed DT 770 M has especially been designed for drummers and FOH monitoring. The strengthened headband and the softskin ear pads provide an excellent isolation against ambient noise. The single sided straight cable allows a volume control directly at the headphone.
▲ Closed headphone
▲ Excellent ambient noise attenuation (35 dBA)
▲ Superb sound quality with high sound pressure level (105 dB)
▲ Extended frequency range
▲ Single-sided cable with volume control
▲ Robust, easy serviceable construction as all parts are replaceable
▲ Excellent comfort for long-term wearing, softskin ear pads
▲ Secure and comfortable fit due to rugged, adjustable headband construction with soft padding
▲ Single-sided cable
▲ Supplied in a carrying case (nylon)
| Transmission type |
|
Wired |
| Headphone design (operating principle) |
|
Closed |
| Headphone impedance |
|
80 ohms |
| Headphone frequency response
The frequency response specifies the highest and lowest frequencies reproduced by the acoustic transducer of the headphones. |
|
5 - 30.000 Hz |
| Nominal sound pressure level
The (nominal) sound pressure level is the pressure in pascals (Pa) with which the air and the eardrum are caused to vibrate, better known as the volume. The sound pressure level is therefore a measure of the volume of a set of headphones under standardized conditions. However, it says nothing about whether the distortion is low and the sound is good at such a high volume. |
|
105 dB |
| Construction |
|
Circumaural (around the ear) |
| Cable & plug |
|
Straight connecting cable with mini-jack plug (3.5 mm) & ¼" adapter (6.35 mm) |
| Net weight without packaging |
|
300 g |
|
The SRH440 Professional Studio Headphones from Shure provide exceptional sound reproduction and comfort.
Optimized for home and studio recording, SRH440 headphones reproduce accurate audio across an extended range.
Impedance, power handling and sensitivity are all calibrated for professional audio devices such as DJ mixers, mixing consoles, and headphone amplifier. Includes carrying bag and threaded 1/4" (6.3mm) gold plated adapter.
Enhanced frequency response delivers accurate audio across an extended range
Impedance and power handling optimized for perfomance with professional audio devices
Adjustable headband and collapsible construction provide comfort and portability
Bayonet clip securely locks detachable cable into ear cup
Sensitivity
105 dB
Maximum Input Power
500 mW
Frequency Response
10 Hz - 22 kHz
Weight
9.6 oz (272 g)
Cable Length
3 meters (9.84 ft)
Cable Style
Detachable coiled oxygen-free copper
Plug
Gold-plated 1/8" (3.5 mm) stereo mini jack
| The ATH-M20x professional monitor headphones are a great introduction to the critically acclaimed M-Series line. Modern design and high-quality materials combine to deliver a comfortable listening experience, with enhanced audio and effective isolation. An excellent choice for tracking and mixing.
- Advanced build quality and engineering
- 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
- Tuned for enhanced low-frequency performance
- Circumaural design contours around the ears for excellent sound isolation in loud environments
- Convenient single-side cable exit
Specifications
- Type: Closed-back dynamic
- Driver Diameter: 40 mm
- Magnet: Neodymium
- Voice Coil: Copper-clad aluminum wire
- Frequency Response: 15 - 20,000 Hz
- Maximum Input Power: 700 mW at 1 kHz
- Sensitivity: 96 dB
- Impedance: 47 ohms
- Weight: 190 g (6.7 oz), without cable and connector
- Cable: 3.0 m (9.8'), straight, left-side exit
- Accessory Included: 6.3 mm (1/4“) snap-on adapter
|
- Professional circumaural hi-fi stereo studio headphones
- Self-adjusting headband for optimum fit
- Patented Varimotion speakers
- High noise attenuation
- For onstage and studio use
- Automute feature mutes headphones when they are taken off
- Leatherette and additional velvet ear pads
- Single-sided, detachable 3 m cable and additional 5 m coiled cable
The newly designed AKG legend, K 271 MK II combines the benefits of AKGʼs circumaural design for extreme comfort and a closed-back design for maximum isolation from ambient noise. Thanks to its XXL transducers, the K 271 MK II sounds clean, smooth and very rich.
The K 271 MK II is the perfect choice for any application where sonic bleed could cause problems such as broadcast work.
Another important feature of the K 271 MK II is the addition of a switch in the headband that mutes the audio just as soon as the headphones are taken off.
| Type |
closed-back, dynamic headphones |
| Sensitivity |
91 dB/mW, 104 dB/V |
| Frequency range |
16 to 28,000 Hz |
| Rated impedance |
55 ohms |
| Max. input power |
200 mW |
| Earpads |
leatherette und velvet |
| Cable |
3 m single-sided and 5 m coiled cable (99,9% oxygen-free); plug-in cable on headphones (mini-XLR connector) |
| Connector |
gold plated stereo mini jack |
| Adapter |
gold plated 1/8" to 1/4" screw-on adapter |
| Net weight (without cable) |
240 g (8.5 oz.) |
| Shipping weight |
550 g (19.4 oz.) |
| Patent(s) |
Varimotion – multiple-thickness diaphragm for dynamic transducer (Patent no. AT 403.751, US 6,185,809, EP 814.637 (DE, DK, FI, FR, GB, IT, NL), JP 3.927.651); Acoustics slot resistor for dynamic transducer (Patent no. AT 408.706, US 6,639,991, ZL 01116806) |
| The SRH1840 Professional Open Back Headphones feature individually matched drivers for unparalleled acoustic performance, including smooth, extended highs and accurate bass. Developed with premium materials and precision engineering, the custom-crafted design is extremely lightweight and durable. Ideal for mastering or critical listening applications.
The included storage case, replacement set of velour ear pads, replacement cable, and threaded adapter ensure years of uninterrupted listening enjoyment.
Individually matched 40 mm neodymium drivers for unparalleled acoustic performance with smooth, extended highs and accurate bass
Open-back, circumaural design for exceptionally natural sound, wide stereo image, and increased depth of field
Lightweight construction featuring aircraft-grade aluminum alloy yoke and stainless steel grilles for enhanced durability
Steel driver frame with vented center pole piece improves linearity and eliminates internal resonance for consistent performance at all listening levels
Ergonomic dual-frame, padded headband is lightweight and fully adjustable for hours of listening comfort
Optimized for connection to external headphone amplification systems
Oxygen-free copper cable with Kevlar® reinforced jacket for superior performance and durability
Dual-exit cables with gold-plated MMCX connectors provide secure connection and detachability for easy storage or replacement
Replaceable velour ear pads with high-density, slow-recovery foam for exceptional comfort
Individually tested and serialized
Legendary Shure durability to withstand the rigors of everyday use
Type
Open-back, circumaural
Sensitivity
96 dB SPL/mW
Maximum Input Power
1000 mW
Frequency Range
10 Hz – 30 kHz
Weight
0.59 lbs (268 g)
Cable Style
Dual-exit, detachable oxygen-free copper
Cable Length
6.9 ft (2.1 m)
Plug
Gold-plated 1/8" (3.5 mm) stereo mini-jack |
Reviews
There are no reviews yet.