Content |
- 10th Anniversary model
- 2 Channels
- Power: 10 Watts
- Speakers: 1x 12" Celestion seventy 80
- 1x ECC83 preamp tube
- 1x 6L6 power tube
- Boost switch
- Built-in reverb
- Controls: Volume, Boost, Tone, Reverb
- Emulated output - behind the power amplifier
- Adjustable series effects loop
- Effects level switch
- 3 Loudspeaker outputs: 1x 16 Ohms, 1x 8 Ohms and 2x 16 Ohms
- Dimensions: 59 x 37 x 52 cm
- Weight: 17 kg
|
Product Description
The Marshall MG102CFX provides pure analog Marshall tone. Marshall MG102CFX is a Carbon Fiber outfitted 100 watt 2x12 Combo with FX! With a totally new internal design and approach, the brand new MG Series delivers essential digital features, but with vast superior and programmable analogue tone at its heart.
Innovation, Functionality, Tone - just a few words that help sum up the brand new range of solid-state MG amplifiers from Marshall. Combining years of experience in analogue amplification with cutting-edge digital technology has resulted in the creation of an all-encompassing amplifier series, ideal for the beginner and gigging pro alike.
Specially voiced digital effects, intuitive footswitching technology and four adjustable and storable channels are just a few of the features found in the new MG range. From a punchy 10 watt combo through to an effects laden, soul pounding 100 watt head, this series has it all.
Features
- Modern Brushed Silver Panel and Carbon Fiber Look Vinyl
- New Programmable FX Include Studio and Spring Reverb; Octave Plus Reverse Delay
- 3 Simultaneous Digital FX at once
- 4 Programmable Analog Channels- Clean, Crunch, OD1, OD2
- Stompware pedal friendly
- 3 Band EQ
- Programmable Speaker Damping
- MP3 Input
- Headphone Jack
- 2x12 in. Speakers
- 100 watts
|
Vox DA15 15W Guitar Amplifier
Introducing the affordable, portable DA15 Digital Amp from VOX. Don't let the small size fool you. This rugged little beast boasts some killer bells and whistles, such as 11 distinctive sound styles ranging from clean to high gain, 11 great sounding, digital effects, a ???knob-based?? control panel that's really easy to use plus a whole lot more.
Specifications:
Number of Styles: 11
Number of Effects: 11 plus noise reduction
Signal Processing: 24-bit (both A/D and D/A conversion), 44.1 kHz sampling frequency
Input/Output Jacks: INPUT, FOOT SW, LINE/PHONE
Power Amp Output: Maximum 15W RMS @ 8 ohms
Speaker: 1 x 8 inch, VOX original (8 ohm)
Power Supply: Local Mains
Dimensions: 16.81?? x 8.90?? x 15.24?? (W x D x H)
Weight: 22.05 lbs
Options: VFS2 Dual Foot Switch
|
Product Description
MG101CFX is a Carbon Fiber outfitted, 100 Watt 1x12 inch guitar combo amplifier with FX!
Features
- Modern Brushed Silver Panel and Carbon Fiber Look Vinyl
- New Programmable FX Include Studio and Spring Reverb; Octave Plus Reverse Delay
- 3 Simultaneous Digital FX at once
- 4 Programmable Analog Channels- Clean, Crunch, OD1, OD2
- Stompware pedal friendly
- 3 Band EQ
- Programmable Speaker Damping
- MP3 Input
- Headphone Jack
- 1x12 in. Speaker combo
- 100 watts
|
From as clean as you please to as dirty and growly as you want it! We ain't kiddin' neither!
The possibilities are endless with this little guy. This JVM has 2 independent channels with 3 gain stages. A smart footswitch that remembers your settings...great for playing live! There are 2 master volumes that can be recalled by the footswitch as well. The reverb sounds incredible...it really does. Emulated XLR out for recording. You can dial into any sound you desire with this amp. 2 effects loops. You get it all with a Marshall JVM
Marshall JVM 205C Specs:
100W power
All-valve, with 5 x ECC83s, and 4 x EL34s
1x Vintage 12" + 1x Heritage 12" Speaker
2 totally independent, footswitchable channels
Each channel has 3 footswitchable modes (clean,crunch & overdrive)
Footswitchable, studio-quality digital reverb
Independent reverb controls for each channel
2 footswitchable master volumes
2 FX loops, one series, and one parallel
Parallel FX loop is footswitchable on/off
Speaker emulated XLR output
4-way footswitch (with memory) supplied
All switching can be done via MIDI
Made in England
|
The 2266C 50-watt 2X12 combo is an all-valve single channel amplifier with a choice of 2 "dynamic ranges" selectable by a footswitch. The Low range equates to the performance you would come to expect from a stock vintage Marshall amplifier in terms of tone and available gain. The High range adds an extra preamp valve into the signal path, facilitating those classic hard rock tones of the '70s.
Specification
Output (RMS): 50 watts
Speakers: 2 x G12C
Pre-amp Valves: 4 x ECC83
Power Amp Valves: 2 x KT66
Footswitch (Supplied): PEDL-00041
Dimensions (mm): 690 x 5700 x 270
Weight (kg): 30
|
Reviews
There are no reviews yet.