| Content |
The ID: Series represents the culmination of more than seven years technical research and development by the same team that designed Series One, Artisan and HT Venue. The unique controls allow you to custom design your own sound, store it and then have the confidence that the amp will perform in a live environment.
By using the unique Voice control, patented ISF and patent-applied-for True Valve Power, these amplifiers allow unparalleled flexibility and ease of use, enabling you to in effect, design the sound in your head and deliver it live as LOUD as valve.
Individuality is power!
| Power: |
60 Watts |
| Speaker: |
2 x 12“ |
| Effect: |
Multi effects - 4 x modulations, 4 x delays, 4 x reverbs |
| Modeling Technology: |
Yes |
| Channels: |
6 - Clean Warm, Clean Bright, Crunch, Super Crunch, OD 1, OD 2 |
| Equalizer: |
Yes |
| Dimensions ( W x H x D ): |
68.6 x 51 x 25 cm |
| Weight: |
24.2 kg |
| MINI GUITAR AMP MARSHALL MS-2
1" Speaker, 2 Watts
Volume Tone Control.
Channel Switch (clean/overdrive).
Headphone Out.
Colour: Black.
Power Supply: 9V Battery or AC adaptor (not included).
Dimensions:
Width: 110 mm
Depth: 60 mm
Height: 140 mm
Weight: 0.34kg |
Marshall 1962 Bluesbreaker Combo Guitar Amplifier
Used by Clapton during his stint with Mayall's Bluesbreakers. It's a JTM45 in combo form with a footswitchable tremolo. It produces a gutsy bass and vibrant top, coupled with an overall natural warmth. 45W. Dimensions: 740x600x235 mm. Weight: 30.2 Kg.
|
Product Description
The Marshall MG102CFX provides pure analog Marshall tone. Marshall MG102CFX is a Carbon Fiber outfitted 100 watt 2x12 Combo with FX! With a totally new internal design and approach, the brand new MG Series delivers essential digital features, but with vast superior and programmable analogue tone at its heart.
Innovation, Functionality, Tone - just a few words that help sum up the brand new range of solid-state MG amplifiers from Marshall. Combining years of experience in analogue amplification with cutting-edge digital technology has resulted in the creation of an all-encompassing amplifier series, ideal for the beginner and gigging pro alike.
Specially voiced digital effects, intuitive footswitching technology and four adjustable and storable channels are just a few of the features found in the new MG range. From a punchy 10 watt combo through to an effects laden, soul pounding 100 watt head, this series has it all.
Features
- Modern Brushed Silver Panel and Carbon Fiber Look Vinyl
- New Programmable FX Include Studio and Spring Reverb; Octave Plus Reverse Delay
- 3 Simultaneous Digital FX at once
- 4 Programmable Analog Channels- Clean, Crunch, OD1, OD2
- Stompware pedal friendly
- 3 Band EQ
- Programmable Speaker Damping
- MP3 Input
- Headphone Jack
- 2x12 in. Speakers
- 100 watts
|
- 30-watt, 2x12" combo guitar amplifier
- Two channels with independent volume controls — Normal and Top Boost
- Reverb and Tremolo effects onboard (controllable via optional footswitch)
- Master volume section with Tone Cut and Volume controls
- True bypass effects loop for bringing in your own pedals
- Switchable 8-/16-ohm output jack for external speakers (mutes internal speakers)
- 16-ohm output jack for running a cabinet along with the internal speakers
- Features two 12" 8-ohm Celestion Alnico Blue speakers
- Uses 3 x 12AX7 preamp tubes and 4 x EL84 power tubes
- Dimensions (W x D x H): 27.64" x 10.43" x 21.89“
- Weight: 73.59 lbs.
|
The 2266C 50-watt 2X12 combo is an all-valve single channel amplifier with a choice of 2 "dynamic ranges" selectable by a footswitch. The Low range equates to the performance you would come to expect from a stock vintage Marshall amplifier in terms of tone and available gain. The High range adds an extra preamp valve into the signal path, facilitating those classic hard rock tones of the '70s.
Specification
Output (RMS): 50 watts
Speakers: 2 x G12C
Pre-amp Valves: 4 x ECC83
Power Amp Valves: 2 x KT66
Footswitch (Supplied): PEDL-00041
Dimensions (mm): 690 x 5700 x 270
Weight (kg): 30
|
Reviews
There are no reviews yet.