Content |
Easily add Bluetooth audio to any amp with a line in. Only a small number of amps sold have Bluetooth as standard, which makes the Tone:Link the perfect accessory for any musician. Priced to sell in volume, they are an ideal add-on sale. Blackstarʼs Bluetooth Tone:Link is the easy way to turn any amp with a line in, into a wireless stereo audio receiver. With it, you can listen to audio or jam along with tracks without the inconvenience of cables. It is designed for guitar amps, PAs, mixer desks, AV systems, home stereos, headphones, car or motorcycle speakers, boats and more. If used with phone it is an easy to use, hands-free Bluetooth speaker for vehicle systems.
Specifications
- Two-link: can connect two Bluetooth devices at the same time
- Long distance reception, more than 20 metres in open spaces without obstacles
- Super clear audio
- Supports mobile, laptop, phone, tablet, or any device with compatible Bluetooth
- Built-in Li-battery with low power consumption for long use
- Cables and connectors supplied
- Full colour display packaging
- Working time: Up to 8 hours music playback or continuous with Micro-USB charger
- Compact dimensions: 50 x 25.5 x 11 mm
|
System Specifications
Operating Frequencies: UHF band
Band C: 541.500 MHz to 566.375 MHz (996 frequencies)
Band D: 655.500 MHz to 680.375 MHz (996 frequencies)
Band I: 482.000 MHz to 507.000 MHz (1001 frequencies)
Not all frequencies are available in all areas. Please check with local regulations.
Minimum Frequency Step: 25 kHz
Modulation Mode: FM
Maximum Deviation: +/-35 kHz
Dynamic Range: > 110 dB (A-weighted), typical
Total Harmonic Distortion:
Operating Range: 100 m (300'), typical
Open range environment with no interfering signals.
Operating Temperature Range: -5o C to +45o C (23o F to 113o F)
Battery and LCD performance may be reduced at very low temperatures.
Frequency Response: 70 Hz to 15 kHz (+1 dB, -3 dB)
Receiver
Receiving System: True diversity
Image Rejection: 60 dB nominal, 55 dB minimum
RF Sensitivity: 20 dBuV at 60 dB S/N ratio
Maximum Output Level: XLR, balanced: +9 dBV; 1/4-inch (6.3 mm), unbalanced: +7 dBV
Antenna Input: BNC-type, 50 ohms
Bias voltage 12V DC, 60 mA, each
Power Requirements: 12-18V DC, 500 mA
Dimensions: 210.0 mm (8.27“) W x 164.4 mm (6.47“) D x 44.0 mm (1.73“) H
Not including BNC connectors or feet.
Net Weight: 1.1 kg (38.8 oz), without accessories
Accessories Included: Two flexible UHF antennas; AC adapter (country dependent); rack-mount adapters
Body Pack
RF Power Output High: 30 mW, Low: 10 mW (switchable), at 50 ohms
Spurious Emissions: Following federal and national regulations
Input Connection: Four-pin Locking Connector
- Pin 1: GND
- Pin 2: INST INPUT
- Pin 3: MIC INPUT
- Pin 4: DC BIAS +5V
Batteries: Two 1.5V AA, not included
Battery Life:
- High: 6 hours (alkaline)
- Low: 8 hours (alkaline)
Depending on battery type and use pattern.
Dimensions: 66.0 mm (2.60“) W x 24.0 mm (0.94“) D x 87.0 mm (3.43“) H
Net Weight: 81 g (2.9 oz), without batteries Dimensions and Weight in PackagingChannel DShipping Weight: 5 lbs Shipping Dimensions: 15 x 13 x 4 in Channel CShipping Weight: 5 lbs Shipping Dimensions: 15 x 13 x 4 in Channel IShipping Weight: 6 lbs Shipping Dimensions: 15 x 14 x 4 in |
System Specifications
Operating Frequencies: UHF band
Band C: 541.500 MHz to 566.375 MHz (996 frequencies)
Band D: 655.500 MHz to 680.375 MHz (996 frequencies)
Band I: 482.000 MHz to 507.000 MHz (1001 frequencies)
Not all frequencies are available in all areas. Please check with local regulations.
Minimum Frequency Step: 25 kHz
Modulation Mode: FM
Maximum Deviation: +/-35 kHz
Dynamic Range: > 110 dB (A-weighted), typical
Total Harmonic Distortion:
Operating Range: 100 m (300'), typical
Open range environment with no interfering signals.
Operating Temperature Range: -5o C to +45o C (23o F to 113o F)
Battery and LCD performance may be reduced at very low temperatures.
Frequency Response: 70 Hz to 15 kHz (+1 dB, -3 dB)
Receiver
Receiving System: True diversity
Image Rejection: 60 dB nominal, 55 dB minimum
RF Sensitivity: 20 dBuV at 60 dB S/N ratio
Maximum Output Level: XLR, balanced: +9 dBV; 1/4-inch (6.3 mm), unbalanced: +7 dBV
Antenna Input: BNC-type, 50 ohms
Bias voltage 12V DC, 60 mA, each
Power Requirements: 12-18V DC, 500 mA
Dimensions: 210.0 mm (8.27“) W x 164.4 mm (6.47“) D x 44.0 mm (1.73“) H
Not including BNC connectors or feet.
Net Weight: 1.1 kg (38.8 oz), without accessories
Accessories Included: Two flexible UHF antennas; AC adapter (country dependent); rack-mount adapters
Body Pack
RF Power Output High: 30 mW, Low: 10 mW (switchable), at 50 ohms
Spurious Emissions: Following federal and national regulations
Input Connection: Four-pin Locking Connector
- Pin 1: GND
- Pin 2: INST INPUT
- Pin 3: MIC INPUT
- Pin 4: DC BIAS +5V
Batteries: Two 1.5V AA, not included
Battery Life:
- High: 6 hours (alkaline)
- Low: 8 hours (alkaline)
Depending on battery type and use pattern.
Dimensions: 66.0 mm (2.60“) W x 24.0 mm (0.94“) D x 87.0 mm (3.43“) H
Net Weight: 81 g (2.9 oz), without batteries Dimensions and Weight in PackagingChannel DShipping Weight: 5 lbs Shipping Dimensions: 15 x 13 x 4 in Channel CShipping Weight: 5 lbs Shipping Dimensions: 15 x 13 x 4 in Channel IShipping Weight: 6 lbs Shipping Dimensions: 15 x 14 x 4 in |
System Specifications
Operating Frequencies: UHF band
Band C: 541.500 MHz to 566.375 MHz (996 frequencies)
Band D: 655.500 MHz to 680.375 MHz (996 frequencies)
Band I: 482.000 MHz to 507.000 MHz (1001 frequencies)
Not all frequencies are available in all areas. Please check with local regulations.
Minimum Frequency Step: 25 kHz
Modulation Mode: FM
Maximum Deviation: +/-35 kHz
Dynamic Range: > 110 dB (A-weighted), typical
Total Harmonic Distortion:
Operating Range: 100 m (300'), typical
Open range environment with no interfering signals.
Operating Temperature Range: -5o C to +45o C (23o F to 113o F)
Battery and LCD performance may be reduced at very low temperatures.
Frequency Response: 70 Hz to 15 kHz (+1 dB, -3 dB)
Receiver
Receiving System: True diversity
Image Rejection: 60 dB nominal, 55 dB minimum
RF Sensitivity: 20 dBuV at 60 dB S/N ratio
Maximum Output Level: XLR, balanced: +9 dBV; 1/4-inch (6.3 mm), unbalanced: +7 dBV
Antenna Input: BNC-type, 50 ohms
Bias voltage 12V DC, 60 mA, each
Power Requirements: 12-18V DC, 500 mA
Dimensions: 210.0 mm (8.27“) W x 164.4 mm (6.47“) D x 44.0 mm (1.73“) H
Not including BNC connectors or feet.
Net Weight: 1.1 kg (38.8 oz), without accessories
Accessories Included: Two flexible UHF antennas; AC adapter (country dependent); rack-mount adapters
Body Pack
RF Power Output High: 30 mW, Low: 10 mW (switchable), at 50 ohms
Spurious Emissions: Following federal and national regulations
Input Connection: Four-pin Locking Connector
- Pin 1: GND
- Pin 2: INST INPUT
- Pin 3: MIC INPUT
- Pin 4: DC BIAS +5V
Batteries: Two 1.5V AA, not included
Battery Life:
- High: 6 hours (alkaline)
- Low: 8 hours (alkaline)
Depending on battery type and use pattern.
Dimensions: 66.0 mm (2.60“) W x 24.0 mm (0.94“) D x 87.0 mm (3.43“) H
Net Weight: 81 g (2.9 oz), without batteries Dimensions and Weight in PackagingChannel DShipping Weight: 5 lbs Shipping Dimensions: 15 x 13 x 4 in Channel CShipping Weight: 5 lbs Shipping Dimensions: 15 x 13 x 4 in Channel IShipping Weight: 6 lbs Shipping Dimensions: 15 x 14 x 4 in |
- EIA-standard half 19” metal case.
- Front panel includes ACT sync button, rotary control knob for menu settings and dual audio LED indicators.
- LCD screen displays group & channel, encryption status, RF output, stereo/mono mode.
- Lockable front panel.
- PLL-synthesized technology enables multiple preset compatible channels.
- 64MHz bandwidth.
- 112 dBA S/N ratio.
- Balanced and unbalanced audio inputs.
- Switchable Line & Microphone, adjustable sensitivity levels and up to +26 dBU maximum SPL.
- Built-in 3 bands EQ settings.
- Selectable encryption keys.
- Scan for an open, interference-free frequency.
- 6.3mm headphone monitoring jack.
- RJ-11 MIPRO ACT-BUS connector.
- Up to 100mW output power. selectable Hi, Low or Off setting.
- TNC 50Ω RF output & input connectors.
Frequency Range
|
470~664 MHz, 672~960 MHz (country dependent)
|
Bandwidth
|
64 MHz
|
Oscillation Mode
|
PLL-Synthesized
|
Channel Grid
|
25 kHz
|
Frequency Stability
|
±0.005% (-10~+60℃)
|
Modulation Mode
|
Digital Modulation
|
Output Power
|
10 ~ 100 mW (country dependent)
|
Spurious Rejection
|
|
Frequency Response
|
20 Hz ~ 15 kHz (Stereo)
|
T.H.D.
|
|
ADC Dynamic Range
|
112 dBA
|
Stereo Audio Input
|
Phone 6.3 mm Ø ×2, XLR, 6.3 mm Ø Combo Jack
|
Max. SPL
|
> +26 dBu, Selectable Line and Microphone level
|
Audio input adjustment
|
0 ~ -30 dB, 3 dB step
|
Headphone Monitor
|
6.3 mm Ø Stereo Jack with volume control
|
Impedance
|
≧ 16 Ω
|
Network Interface
|
RJ-11 × 2, proprietary MIPRO ACT-BUS
|
Antenna Connector
|
TNC (50 Ω impedance)
|
Power Supply
|
DC 12~15V
|
Dimensions (W × H × D)
|
210 × 44 × 206 mm (8.3 × 1.7 × 8.1“)
|
Weight
|
Approx. 1.1 kg ( 2.4 lbs)
|
Note
|
Refer to actual product in the event of product description discrepancy.
Frequency range and maximum deviation comply with the regulations of different countries.
|
| A lightweight, low-profile wireless system that provides guitarists with 200 feet of freedom.
The Line 6 Relay G50 Digital Wireless System provides a pure signal with a clarity that rivals that of the highest-quality guitar cables. Guitars get a beautiful high-end sparkle and basses get a thunderous low-end punch, even at distances of up to 200 feet. Traditional wireless systems compromise the sound of your instrument by rolling-off crucial high- and low-end frequencies and compressing their signals. This system on the other hand, offers superior sound with full bandwidth and zero compression.
Professional Dependability
Broadcasting over the 2.4GHz band keeps the Line 6 Relay G50's signal free from many kinds of interference. Traditional wireless guitar systems are susceptible to dropouts, static, and many other kinds of interference. Broadcasting over congested UHF bands, their signals may be affected by interference generated as far away as 100 miles or more. For added security, the Relay G50 employs exclusive signal protection technology, simultaneously broadcasting encrypted data streams to multiple antennas.
Refreshing Simplicity
The Relay G50 is a low-profile wireless system that's easy to use. The lightweight transmitter remains out of the way of your performance and its LCD displays channel number and battery life. The rugged metal receiver offers bright and easy-to-read LEDs that display power, status, and battery life. Its dual 1/4" outputs make it an easy addition to your pedal board.
Attached to Your Guitar Cable?
For players attached to cables, adopting a wireless system introduces many questions: What will it feel like? Will it change my sound? The Line 6 Relay G50 sounds just like a cable, but it also sounds just like your cable. It features EQ settings that match the frequency responses of typical guitar cables. Different players use different cables, but all players can use Relay G50.
The Wireless Revolution
Relay G50 is proudly ushering in a better-sounding and more dependable era of wireless guitar systems. It will inspire you to explore new areas of your music and the stage.
The wireless guitar system comes complete with transmitter, receiver and all necessary accessories including locking cable, power supply, and batteries.
Features
200-foot range, line-of-sight
Broad 10Hz - 20kHz frequency response; Superior 120dB dynamic range; 24-bit digital conversion
8 hours of battery life (AA alkaline batteries)
Lightweight, low-profile and easy to use
Bright LEDs and LCD show power, status, and battery life
EQ presets match Relay G50 to the sound of your guitar cable
Comes complete with transmitter, receiver and all necessary accessories including locking cable, power supply and batteries
2.4GHz band is optimal for guitar wireless, FCC/DTV compliant
Multiple layers of signal protection; Encrypted data stream; Simultaneous broadcasts on multiple channels |
Reviews
There are no reviews yet.