Content | The Yeti is the most advanced and versatile multi-pattern USB microphone available anywhere. Combining three capsules and four different pattern settings, the Yeti is the ultimate tool for creating amazing recordings, directly to your computer. THX Certified for exceptional sound and performance, the Yeti can capture anything with a clarity & ease unheard of in a USB microphone.
The Yeti features Blue\'s innovative triple capsule array, allowing for recording in stereo or your choice of three unique patterns, including cardioid, omnidirectional, and bidirectional, giving you recording capabilities usually requiring multiple microphones.
The Yeti utilizes a high quality analog-to-digital converter to send incredible audio fidelity directly into your computer, a built-in headphone amplifier for zero-latency monitoring, and simple controls for headphone volume, pattern selection, instant mute, and microphone gain located directly on the microphone.
The Yeti\'s exceptional performance and fidelity have earned it the distinction of being the first THX Certified Microphone, a validation of Yeti\'s incredibly low distortion, high fidelity, and balanced frequency response. There are no drivers to install — simply plug the Yeti into your PC or Mac, load up your favorite recording software, and record something amazing.
Primary Applications Podcast
Form Factor Desktop / Stand/Boom Mount
Intended Sound Sources Vocals
Sound Field Mono, Stereo
Diaphragm 0.55" / 14 mm
Polar Pattern Cardioid, Figure-8, Omnidirectional
Pattern Selection Switched
Orientation Side Address
High-Pass Filter Yes
On-Board Controls Headphone Volume
Frequency Range 20 Hz to 20 kHz
Maximum SPL 120 dB SPL
THD 0.5%
Output Connectors (Digital) 1 x USB (Type Unspecified)
Headphone Connector 1 x 1/8" / 3.5 mm
A/D Conversion 16-Bit
Sample Rate 48 kHz
Operating System Support Windows, macOS/OS X
RAM Requirement 64 MB Minimum
Available Port USB (Interface Unspecified)
Bus Power USB
Operating Voltage Not Specified by Manufacturer
Mounting 5/8"-27 Female (via Integrated Hardware)
Desktop Stand (with Included Hardware)
Dimensions ø: 4.72 x W: 4.92 x L: 11.61" / ø: 11.99 x W: 12.5 x L: 29.49 cm
Weight 2.2 lb / 1 kg
Package Weight 3.715 lb
Box Dimensions (LxWxH) 11.45 x 6.4 x 5.5" | Optimised for podcasters, gamers, streamers and home recording applications
Three integrated 14 mm capsules
Switchable polar pattern: omnidirectional, figure-eight, cardioid, stereo
Frequency range: 20 - 20,000 Hz
Max. SPL: 120 dB
AD-converter: 48/44.1 kHz / 16-bit
Gain +17 dB
Mute button
Volume control
Headphone jack: 3.5 mm mini jack
Mini-B USB connector
Plug & Play compatible with Windows 10 (64-bit) and Mac OSX 10.10 or higher
5/8" Thread for mounting on standard microphone stands
Dimensions (H x W x D): 227 x 110 x 110 mm
Weight: 1.7 kg
Includes table stand and USB cable |
The sE X1 USB combines the hugely popular sE X1 large-diaphragm condenser microphone with high-quality USB technology to provide a professional studio microphone for use anywhere!
The sE X1 USB offers the same great performance as the original sE X1, but with the added convenience of plugging straight into a USB port on a PC or Mac, negating the need for an audio interface or external power supply. The sE X1 USB features a cardioid polar pattern with a bass cut and a -10dB pad, and it ships with a mic clip as standard.
The sE X1 USB is fitted with a USB 2.0 connection and is fully USB 3.0 compatible. As with the rest of the sE X1 range, the sE X1 USB has been treated with a Matte Black finish, meaning the microphone can easily blend into the background on stage or during video recordings. The X1 USB is compatible with the sE Isolation Pack.
- Directional pattern: Cardioid
- Frequency range: 20Hz - 20kHz
- Sensitivity: -27dBV (mV/Pa)
- Equivalent noise level: 19.8 dB
|
Combining high-resolution audio with increased connectivity options, the AT2020USBi cardioid condenser microphone adds a new level of sound-quality and convenience to the expanding lineup of Audio-Technica USB microphones. Modeled after the critically acclaimed AT2020, this digital output mic features an A/D converter with a 24-bit/96 kHz sampling rate to deliver high-resolution articulation and intelligibility thatʼs perfect for home studio recording, field recording, podcasting and voiceover use.
The AT2020USBi works with both USB and Lightning cables (included), so you can use it straight from the box to digitally capture audio on the device of your choice: PC, Mac or lightning equipped iOS device. The integrated gain control adds to the convenience, allowing you to adjust the input level directly on the microphone.
The AT2020USBi cardioid condenser microphone brings state-of-the-art sound for the on-the-go lifestyle to the family of Audio-Technica USB mics.
- Condenser microphone with digital output for convenient, high-resolution recording
- High-quality A/D converter with 24-bit/96 kHz sampling rate for superb, high-resolution audio
- Mic gain control allows you to adjust input level on the mic itself
- Smooth, extended frequency response ideally suited for podcasting, home studio recording, field recording and voiceover use
- Compatible with Windows 7 and above, Mac OS 10.6 and above, and iOS 7.02 and above (requires Lightning connector).
- Tripod desk stand with folding legs for secure and easily portable tabletop use
- Included USB and Lightning cables provide ready connectivity to computers and iOS devices
ELEMENT | Fixed-charge back plate, permanently polarized condenser | POLAR PATTERN | Cardioid | FREQUENCY RESPONSE | 20 – 20,000 Hz | POWER REQUIREMENTS | USB (5V DC); Lightning (3.3V DC) | BIT DEPTH | 24 bit | SAMPLE RATE | Up to 96 kHz | VOLUME CONTROL | Mic gain control | WEIGHT | 350 g (12.3 oz) | DIMENSIONS | 162.0 mm (6.38“) long, 52.0 mm (2.05“) maximum body diameter | OUTPUT CONNECTOR | Micro-HDMI | ACCESSORIES FURNISHED | Pivoting stand mount for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 threaded adapter; soft protective pouch; tripod desk stand; 4.9' (1.5 m) USB cable; 4.9' (1.5 m) Lightning cable |
|
Professional quality microphone for GarageBand on iPad, iPhone and Mac. Features: - Up to 96kHz recording. - Studio quality cardioid condenser microphone. - PureDIGITAL connection for pristine sound quality. - No configuration, just plug in and record. - Designed for vocal and acoustic instrument recording. - Input only, output via iPhone, iPad or Mac. |
- Element: Back electret condenser
- Element diameter: 14mm
- Frequency response: 20–17,000Hz
- Sensitivity: -34dB ± 2dB (0dB = 1V/Pa @ 1kHz)
- Output: USB
- A-D converter: 48kHz / 16-bit sampling rate
- Output impedance: 100Ω ± 30% (at 1kHz)
- Load impedance: >1kΩ
- Self noise: 16dBA
- Max. SPL: 132dB (at 1kHz <1% THD)
- Signal to Noise ratio: 78dB
Microphone, USB Cable, Mic Clip
|
Reviews
There are no reviews yet.