High-end portable Sound system, 700W, 15″ Bluetooth receiver 2x UHF Wireless Microphones SD card reader, USB stick and IR remote control SD card reader, USB stick and IR remote control 2 handheld microphones UHF AA 1.5V LR06 x2 batteries Bluetooth receiver LF 15″ HF 1″ RMS power 350W MAX power 700W Bandwidth 40Hz – 20KHz […]
Plug-and-play lithium ion battery for up to 12 hours continuous operation
Practically unlimited power supply thanks to Quick-Swap Technology®
Provides sound to over 100 people
Ultra-light, portable 4-piece design that weighs only 12.4 kg
Integrated 4-channel mixer
Bluetooth® stereo audio streaming
All-in-one column speaker for PA and monitor applications
Increased range and broader coverage thanks to line-array design
This is a 3 in 1 voice amplifier with UHF wireless microphone, portable Bluetooth speaker, and a portable power bank.You have voice amplifier in your classroom or outdoor activities, used a portable Bluetooth speaker to listen to music, and charge your phone if needed.
Come with a wireless UHF headset mic, sound is Pretty clear and well filtered, no feedback and no distortion. It is excellent as far as range, volume, and life.
This pa speaker amplifier is well built, its firm and very sturdy when hold in hand. If you are a tourist guide who talk alot during each destination, under all kind of weather, the waterproof feature is a plus.
Louder than other 25 watts voice amplifier which allows you to project your voice across a group of 200-300 people.
Rechargeable voice amplifier built-in a 4400mAh （2*2200 mAh）big lithium battery allows the speaker to only take 3-5 hours to fully charge, but plays up to 12 hours of amplify time and up to 8 hours of music playtime. Microphone will take 2-4 hours to fully charge but play up to 3 to 5 hours;
Plug-and-play lithium ion battery for up to 20 hours continuous operation
Practically unlimited power supply thanks to Quick-Swap Technology®
Provides sound to over 100 people
Ultra-light, portable 4-piece design that weighs only 13 kg
Integrated 4-channel mixer
Bluetooth® stereo audio streaming
All-in-one column speaker for PA and monitor applications
Increased range and broader coverage thanks to line-array design
Content
High-end portable Sound system, 700W, 15"
Bluetooth receiver
2x UHF Wireless Microphones
SD card reader, USB stick and IR remote control
SD card reader, USB stick and IR remote control
2 handheld microphones
UHF AA 1.5V LR06 x2 batteries
Bluetooth receiver
LF
15"
HF
1"
RMS power
350W
MAX power
700W
Bandwidth
40Hz - 20KHz
SPL Max
126dB
Power supply
integrated battery, or external battery (12V)
2 wired microphone in 6.35mm Jack
Volume - Echo effects
+/- 12dB microphones bass
treble microphones +/- 12dB
Voice priority function
Dimension
505x435x765
Net weight
20,05
Power supply
230v AC 50 / 60Hz
Autonomy
6-8 hours
Wireless microphone frequency
650 and 666 MHz
Perfectly equipped throughout, the MAUI® 5 GO 100 is the ultimate system to deliver crystal-clear, powerful sound in any location. The ultra-portable battery-powered column-PA is supplied by a high-performance lithium-ion unit that provides power to 12 hours operating time. The charger is built into the subwoofer. An external charging dock is available as an accessory. Inputs for microphone, instrument and line signals as well as Bluetooth® stereo streaming make the MAUI® 5 GO 100 the ideal ideal system for street musicians or for music and speech reproduction at private and business events and all mains power-free applications.
Its superlight weight of just 12.4 kg makes the four-piece design ultra-easy to transport, and thanks to its special multipin connectors, it is assembled and ready to use in seconds. The line-array arrangement of the drivers achieves an extremely high range. The system’s wide dispersion and excellent feedback-resistance removes the need for separate monitors. With 800 watts peak power, the MAUI® 5 GO 100 is the loudest and best-sounding battery-powered PA system on the market, effortlessly providing sound for audiences of over 100 people.
For unparalleled sound quality in all applications, the column system features LD Systems' LECC DSP with multi-band limiter, equalizer, compressor and crossover. The integrated 4-channel mixer provides separate volume controls for the input channels, sum and subwoofer as well as a variable high-frequency boost to facilitate fast and balanced adjustment to the sound. LD Systems’ Quick-Swap Technology® also facilitates immediate and simple battery replacement for practically unrestricted operating times for the MAUI® 5 GO 100.
Specification
Product type
PA Complete Systems
Type
active
Number of subwoofers
1
Color
Black
Max. SPL (peak)
120 dB
Frequency response
50 - 20000 Hz
Dispersion (H x V)
120° x 20
Overall height
1985 mm
Weight
12,4 kg
Battery
Rechargeable batteries
29.36V / 3200 mAh
Battery manufacturer
LG Chem
Battery technology
Lithium-ion
Battery operation time at maximum load
12 hours @ 98 dB (Lounge), 4 hours at 120 dB (DJ mode), 6 h @ 104 dB (Live music)
Charging time
1.5 hours up to 80%, 2 hours up to 100%
Woofer Characteristics
Low/mid driver dimensions
8 "
Woofer size
203.2 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
2 "
Woofer voice coil (mm)
50.8 mm
Cabinet construction
Bass Reflex
Cabinet material
ABS plastic
Subwoofer width
305 mm
Subwoofer height
405 mm
Subwoofer depth
395 mm
Subwoofer weight
8.95 kg
Mid/Hi System
Midrange size
4 x 3 "
Midrange size
4 x 76.2 mm
Midrange magnet
Neodymium
Midrange brand
Custom-made
Midrange voice coil
1 "
Midrange voice coil
25.4 mm
Mid/Hi system impedance
4 Ohm(s)
Loudspeaker inputs
1
Speaker input connections
Custom-made multipin
Cabinet construction mid/high
Closed
Mid/Hi system cabinet material
ABS plastic
Mid/Hi system width
82 mm
Mid/Hi system height
535 mm
Mid/Hi system depth
105 mm
Mid/Hi system weight
3.5 (3ps) kg
Amplifier module (integrated in Subwoofer)
Amplifier
Class D
Amplifier output system (RMS)
200 W
Amplifier output system (peak)
800 W
Protection circuits
DSP-based multiband limiter, over-current, short circuit, thermal overload
Cooling
Convection
Operating Temperature
0 - 50 °C
Controls
BT level, BT pairing, Line level, Main level, Mic level, Mono/stereo mode, MP3 / Hi-Z level, On / Off, Sub level
Indicators
Limit, On, Protect (protection circuit engaged), Signal
Operating voltage
Switching power supply
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz, 200 V AC - 240 V AC, 50 - 60 Hz (Automatic conversion)
Power consumption
300 W
Line inputs
2 x stereo
Line input connectors
6.3 mm jack, XLR
Mic inputs
1
Mic inputs
6.3 mm jack, XLR
MP3 inputs
1
MP3 input connectors
3.5 mm jack
Hi-Z inputs
1
Hi-Z input connectors
6.3 mm jack
Loudspeaker outputs
1
Speaker output connections
Custom-made multipin
DSP
Bit depth AD/DA converter
24 / 24 bit
Internal sampling frequency
48 kHz
Portable PA System Max. 180 Watt incl. CDM-3A Player with Remote Control Robust, rugged enclosure, built-in class D amplifiers system with 8" woofer and 1" tweeter. Up to 4 UHF or 2.4 GHz diversity receiver modules with 16 auto-scannable frequencies and built-in active antenna prevents accidental antenna breakage. Plug-&-play CD/MP3 player, plus certified Bluetooth receiver for music streaming. Voice Priority mutes music when a wireless mic is used. Echo effect for richer-sounding vocals. Industry’s only Master volume with "Memory” and "Standard” mode options. "Memory” mode saves and recalls last volume level during next power on. "Standard” mode resets to zero level. Industry’s only master volume that can be remotely controlled by an optional ACT-32HR transmitter microphone directly instead of a separate remote. Retractable handle and rugged wheels make it amazingly easy to transport. Built-in storage compartment for 2 handhelds or bodypack transmitters. Wirelessly link 2 or more MA-708 systems for more sonic coverage (industry’s only MTM-92 trans-mitter module is required). Active limiter prevents speaker damage from loud signal spikes. Can be powered via AC power, battery or direct DC. Weight:16kg
Max. Power Output
190 Watts
Amplifier
Class D
Sensitivity Typical
89db
Maximum
108db
T.H.D.
< 1%
Frequency Response
50 Hz - 18 kHz
Speaker Tweeter
1" Compression Driver
Bass
8" Woofer
Coverage
H80° x V60°
Audio Inputs Wired
XLR x 1, 6.3 mm (1/4 ") x 1
Wireless
Up to 4 wireless microphones
Audio Player
CDM-2︱DPM-3
Line-In
Unbalanced RCA jack
Bluetooth Connectivity
Yes
Audio Output
Unbalanced line RCA jack
Extension Speaker
Ø 6.3 mm (1/4 ") Phone jack
Master Volume Control Manually or Wirelessly via ACT-32HR
Controls
Tone, Voice Priority & Echo on wireless mics
Storage
2 handheld or bodypack transmitters
Installation
Speaker stand, flat surface or retractable handle & wheels
Power Supply AC
Built-in 100 ~ 240 V AC switching power supply (Max. Power Consumption 220 W)
DC & Battery
24 - 32 V DC, 12 V / 4.5 AH rechargeable gel cell battery (MB-70 × 2) or optional MB-80 × 2
Charge Time
8 hours (automatic charging management)
Standby Time
> 7 hours
Battery Indicator
4-level indicator (25/50/75/100%)
Color
Black or white option
Dimensions
336 x 545 x 325mm
Weight
16.3 kg 36 lbs (MB-70 batteries included)
Wireless System (optional)
Receiver
1 or 2 MRM-70B︱MRM-70W︱MRM-80︱MRM-24 Scan & ACT sync
Max. Receiver
Up to 4
Frequency Range
MRM-70B︱MRM-70W︱MRM-80
UHF 480 ~ 934 MHz (country dependent)
MRM-24
2.4 GHz
Preset Channels & Bandwidth
See Accessories - Receiver Modules
Transmitters
See Accessories - Receiver Modules
Microphones
MM-107︱MM-39︱MM-59 Wired Dynamic Microphone
Interlinking Transmitter
MTM-92
Installation
Plug-in Module
Antenna
Built-in
Audio Player (optional)
Model
CDM-2 | DPM-3
Installation
Plug-in Module
Note Refer to actual product in the event of product description discrepancy
Wide Application:
This portable bluetooth voice amplifier microphone speaker is perfect for outdoors, teachers, singing, coaches, presentation, fitness instructors, yoga, elderly, tour guides or people who has a soft voice, parkinson's disease.
Multi Functions:
Amplifier your voice as a s loudspeaker, play music via Bluetooth or TF card / USB drive, even be a mobile power to charger your phone
Specifications:
1. Output Power: 18W
2. Charging Voltage: DC 5V
3. Lithium Battery: 3.7V/2200mAh*2pcs
4. Working Time:With 50% Volume
8~10 Hours (musical mode);
10~15 Hours (MIC mode)
5. Charging Time: 3~5 hours
6. Product Size: 120*96*45mm
7. Unit Weight: 392g
8. Available Color: Green; Black
9. Working Temperature: -10℃~45℃
10. Frequency Response: 90Hz~18KHz
11. Wireless Distance:30-35m
Main featuers:
1. The New Born Waterproof Megaphone;
2. Power Display Shows Present Electricty Percent;
3. Bluetooth 4.2 Chip, Singnal Transmission More Fast And Stable;
4. Mobile Charger/ Power Bank Function;
5. Dual Voice Coil Speaker, Maximum Peak Up To 18W;
6. IPX 5 Waterproof
7. Two-Color Injection Molding, More Good Hand Feeling
8. Super MP3 Audio Encoding Technology --- Support TF Card & U Flash Disk;
9. Support AUX --- Can Connect With PC And Work As Speaker;
Standard Package:
1 * Main Machine
1 * Waistband
1 * Wireless Microphone
1 * USB Charging Cable
1 * User Manual
All-In-One Rechargeable Column PA with Built-In Mixer and DSP
The JBL EON ONE MK2 battery-powered column PA packs a class-leading acoustic package, 5-channel digital mixer, dbx and Lexicon DSP, Bluetooth functions and universal app control into a lightweight, portable package that can be carried in one hand.
The EON ONE MK2 delivers the fidelity JBL is legendary for, combining a geometrically optimized, C-shaped 8-tweeter array with a 10” woofer to deliver class-leading clarity and coverage down to 37 Hz, with wide dispersion and a maximum output of 123 dB.
The EON ONE MK2 is engineered for versatility and ease of use: Dial up your signature sound in an instant, thanks to a full suite of pro-grade Lexicon and dbx effects and presets, with controls that scale from beginner to advanced. Variable Power Performance automatically optimizes power performance for AC or battery operation. Bluetooth audio streaming and six-hour battery operation round out the advantages of this all-purpose, all-in-one system.
EON ONE MK2 is ideal for a range of users, from buskers and singer/songwriters seeking pro-grade sound without AC power, to educators and hospitality providers who prioritize fast setup and ease of use, to houses of worship and rental companies who require portable solutions for indoor and outdoor applications. In short: It’s your go-to anytime, anywhere system.
Features
C-shaped array of 8 2” tweeters delivers superior clarity and 140°H x 30°V dispersion for room-filling sound
10” woofer in acoustically optimized cabinet generates natural, smooth low end, down to 37 Hz
Variable Power Performance automatically optimizes power performance to provide 4 dB higher output when connected to an AC source: 123 dB peak SPL using AC power, 119 dB peak using battery power
Built-in 1,500-watt (peak) amplifier
Frequency response: 37 Hz–20 kHz @ -10 dB; 45 Hz–20 kHz @ -3 dB
Easily swappable battery provides 6 hours of play time; battery is integrated into a column spacer to improve stability and to optimize the cabinet acoustic volume for superior low-frequency response
Built-in 5-channel digital mixer is designed by mix engineers for optimized workflow
Three fixed EQ knobs allow fast, hands-on access to onboard EQ
Comprehensive suite of professional-grade Lexicon DSP, including reverb, chorus and delay
dbx DriveRack Inside technology offers AFS (Automatic Feedback Suppression), 8 bands of parametric EQ, and convenient presets
Soundcraft Easy Ducking automatically turns down music when speech is detected
Triple-Tier DSP lets users choose beginner, intermediate or advanced control
I/Os include 3 Neutrik XLR Combo jacks, 1 Hi-Z input and a summed 3.5mm/BT input
¼” balanced passthrough with independent volume control and speaker delay allows for analog system expansion
Two channels of true 48V phantom power expand microphone connectivity
Two USB ports allow device charging from onboard battery or AC power
Bluetooth 5.0 audio streaming to one device, with control of up 10 units
Full-color EasyNav LCD provides access to all control parameters
Simple Success LED meters indicate mixer functions such as mute, signal detection and clipping
JBL Pro Connect universal app offers control over every function of up to ten systems
PA components are stored in the woofer cabinet for easy, one-hand carry
Road-tough, lightweight polypropylene cabinet with steel grille
Accessories include dual battery charger, additional batteries
Weight: 42.5 pounds (19.3 kg)
More Details
UNRIVALED ACOUSTIC PERFORMANCE
The EON ONE MK2 leverages EON family acoustic innovations to deliver higher output, greater clarity and deeper coverage than any PA in its class. Its geometrically-optimized, C-shaped array of eight 2-inch tweeters works in combination with a 10” woofer to deliver smooth, even response down to 37 Hz, with wide horizontal dispersion and deep vertical throw that ensure you sound amazing anywhere in the room. By placing the battery in the column, the woofer cabinet is acoustically optimized to provide the deepest, most natural low end.
POWER THAT WORKS SMARTER, NOT HARDER
EON ONE MK2’s robust 1,500-watt (peak) amplifier ensures clean, distortion-free sound at any volume level. Variable Power Performance technology automatically optimizes performance for either AC or battery power, providing 4 dB extra headroom when connected to AC power. You’ll be heard loud and clear, no matter where you play.
SOUND YOUR BEST WITH PRO FX
EON ONE MK2 features a full suite of professional DSP, including Lexicon reverb, chorus and delay and dbx DriveRack Inside technology, including AFS (Automatic Feedback Suppression) and 8-band EQ . Presenters, fitness instructors and emcees will appreciate the Soundcraft Easy Ducking feature, which lowers background music volume anytime you speak. DSP presets and onboard hardware EQ with 3 fixed knobs make it even easier to hone your signature sound, fast.
TOTAL CONTROL, AT YOUR FINGERTIPS
EON ONE MK2 can be controlled by the universal JBL Pro Connect app, which provides remote access to every function and preset, right from your phone or tablet; JBL’s ActiveSync technology ensures the app and system LCD are always in perfect sync. The EON ONE MK2 offers Bluetooth 5.0 audio streaming to one device, with control of up 10 units.
PORTABLE AND RELIABLE
Weighing just 42.5 pounds, the EON ONE MK2 is designed to be carried in one hand and features an ergonomic handle that’s engineered for maximum comfort. The system is encased in a durable polypropylene shell that’s rugged enough to handle your toughest gigs; like every JBL speaker, the EON ONE MK2 undergoes 100 hours of stress testing to ensure that it’ll perform flawlessly in real-world conditions.
LD Systems MAUI 5 GO
LD Systems MAUI 5 GO ALL in ONE Ultra-portable battery-powered column PA system 200Wrms with battery for up to 20 hours operation
Ultra-portable battery-powered column PA system - 5200 mAh
Plug-and-play lithium ion battery for up to 20 hours continuous operation
Practically unlimited power supply thanks to Quick-Swap Technology®
Provides sound to over 100 people
Ultra-light, portable 4-piece design that weighs only 13 kg
Integrated 4-channel mixer
Bluetooth® stereo audio streaming
All-in-one column speaker for PA and monitor applications
Increased range and broader coverage thanks to line-array design
Perfectly equipped throughout, the MAUI® 5 GO is the ultimate system to deliver crystal-clear, powerful sound in any location. The ultra-portable battery-powered column-PA is supplied by a high-performance lithium-ion unit that provides power for up to 20 hours operating time. The charger is built into the subwoofer. An external charging dock is available as an accessory. Inputs for microphone, instrument and line signals as well as Bluetooth® stereo streaming make the MAUI® 5 GO the ideal system for street musicians or for music and speech reproduction at private and business events and all mains power-free applications.
Its superlight weight of just 13 kg makes the four-piece design ultra-easy to transport, and thanks to its special multipin connectors, it is assembled and ready to use in seconds. The line-array arrangement of the drivers achieves an extremely high range. The system’s wide dispersion and excellent feedback-resistance removes the need for separate monitors. With 800 watts peak power, the MAUI® 5 GO is the loudest and best-sounding battery-powered PA system on the market, effortlessly providing sound for audiences of over 100 people.
For unparalleled sound quality in all applications, the column system features LD Systems' LECC DSP with multi-band limiter, equalizer, compressor and crossover. The integrated 4-channel mixer provides separate volume controls for the input channels, sum and subwoofer as well as a variable high-frequency boost to facilitate fast and balanced adjustment to the sound. In addition, LD Systems' Quick-Swap-Technology® enables the immediate, problem-free replacement of the battery element and thus offers the possibility of extending the operating time of the MAUI® 5 GO as desired.
Product type
PA Complete Systems
Type
active
Number of subwoofers
1
Color
Black
Max. SPL (Peak)
120 dB
Frequency response
50 - 20,000
Dispersion (H x V)
120° x 20 °
Overall height
1985 mm
Weight
12,9 kg
Battery
Rechargeable batteries
28.8 V / 5200 mAh
Battery manufacturer
LG Chem
Battery technology
Lithium-ion
Battery operation time at maximum load
10 h @ 104 dB (Live music), 20 hours @ 98 dB (Lounge), 6 hours at 120 dB (DJ mode)
Charging time
2 hours up to 80%, 3 hours up to 100%
Woofer characteristics
Low/mid Woofer dimensions
8 "
Woofer dimensions (mm)
203.2 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
2 "
Woofer voice coil (mm)
50.8 mm
Cabinet construction
Bass Reflex
Cabinet material
ABS plastic
Subwoofer width
305 mm
Subwoofer height
405 mm
Subwoofer depth
395 mm
Subwoofer weight
8.9 kg
Mid/Hi System
Midrange dimensions
4 x 3 "
Midrange dimensions (mm)
4 x 76.2 mm
Midrange magnet
Neodymium
Midrange brand
Custom-made
Midrange voice coil
1 "
Midrange voice coil
25.4 mm
Mid/Hi system impedance
4 Ohm(s)
Loudspeaker inputs
1
Speaker input connections
Custom-made multipin
Cabinet construction mid/high
Closed
Mid/Hi system cabinet material
ABS plastic
Mid/Hi system width
82 mm
Mid/Hi system height
535 mm
Mid/Hi system depth
105 mm
Mid/Hi system weight
3.5 (3ps) kg
Amplifier Module (integrated in subwoofer)
Amplifier
Class D
Amplifier output system (RMS)
200 W
Amplifier output system (peak)
800 W
Protection circuits
DSP-based multiband limiter, over-current, Short circuit, thermal overload
Cooling
Convection
Ambient temperature (operating)
0 - 40 °C
Controls
BT level, BT pairing, Line level, Main level, Mic level, Mono/stereo mode, MP3 / Hi-Z level, On / Off, Sub level
Indicators
Limit, On, Protect (protection circuit engaged), Signal
Power supply
Switching power supply
Operating voltage
100 V AC - 120 V AC, 50 - 60 Hz, 200 V AC - 240 V AC, 50 - 60 Hz (Automatic conversion)
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Perfectly equipped throughout, the MAUI® 5 GO 100 is the ultimate system to deliver crystal-clear, powerful sound in any location. The ultra-portable battery-powered column-PA is supplied by a high-performance lithium-ion unit that provides power to 12 hours operating time. The charger is built into the subwoofer. An external charging dock is available as an accessory. Inputs for microphone, instrument and line signals as well as Bluetooth® stereo streaming make the MAUI® 5 GO 100 the ideal ideal system for street musicians or for music and speech reproduction at private and business events and all mains power-free applications.
Its superlight weight of just 12.4 kg makes the four-piece design ultra-easy to transport, and thanks to its special multipin connectors, it is assembled and ready to use in seconds. The line-array arrangement of the drivers achieves an extremely high range. The system’s wide dispersion and excellent feedback-resistance removes the need for separate monitors. With 800 watts peak power, the MAUI® 5 GO 100 is the loudest and best-sounding battery-powered PA system on the market, effortlessly providing sound for audiences of over 100 people.
For unparalleled sound quality in all applications, the column system features LD Systems' LECC DSP with multi-band limiter, equalizer, compressor and crossover. The integrated 4-channel mixer provides separate volume controls for the input channels, sum and subwoofer as well as a variable high-frequency boost to facilitate fast and balanced adjustment to the sound. LD Systems’ Quick-Swap Technology® also facilitates immediate and simple battery replacement for practically unrestricted operating times for the MAUI® 5 GO 100.
Reviews
There are no reviews yet.