BOSS ST-2 PEDAL POWER STACK

115.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Upon Request Upon Request SKU: 690.ROL.027 Category:
ST-2: Power Stack Authentic Amp Stack Sounds from a Stompbox Features From fat crunch to ultra high-gain distortion, the ST-2 Power Stack delivers famous BOSS distortion with a stunning amount of power thatʼs akin to coveted tube amps and professional amp stacks. The SOUND knob simultaneously blends gain amount and sound character, so you can […]

 

Read more

ST-2: Power Stack

Authentic Amp Stack Sounds from a Stompbox Features

From fat crunch to ultra high-gain distortion, the ST-2 Power Stack delivers famous BOSS distortion with a stunning amount of power thatʼs akin to coveted tube amps and professional amp stacks. The SOUND knob simultaneously blends gain amount and sound character, so you can quickly dial up anything from vintage crunch and punchy drive to full-assault distortion. To add further detail to your tone, simply tweak the onboard two-band EQ to taste. The ST-2 is one very unique distortion pedal, calling on BOSSʼ years of amp modeling research to bring you real stack sounds in a compact stompbox.

  • Original distortion sound reminiscent of tube-based stack amplifiers
  • Provides a wide range of tones, from vintage crunch to ultra high-gain modern distortion
  • Faithful and accurate response to picking nuances and volume changes
  • SOUND knob controls both gain level and sound character
  • Two-band EQ with dedicated BASS and TREBLE knobs
  • Road-tough BOSS construction

Authentic Amp Stack Sounds from a Stompbox More Info Tower of Power

The ST-2 delivers the playing feel and power that are hallmarks of stack amps. It was derived from BOSSʼ extensive analysis of the sound and characteristics of a vast number of classic guitar amps. This distortion effect delivers authentic tone and expression that responds naturally to picking nuances and volume changes on your guitar. But emulation is only the beginning, as the ST-2 has the ability to go beyond the sound of real amps.

Crunch, Drive, Ultra High Gain

The ST-2 lets you enjoy a rich, clean tone when playing soft, and smoothly transition into a fat crunch as you play harder — great for rock ballads or songs that require dramatic tone shifts. Imagine the powerful, driving sound of a stack amplifier. An authentic classic-rock tone is here as well, with crisp overtones. Turn up the SOUND knob for a heavy-metal tone. The ST-2 allows extreme high gain, but offers a powerful low-end and sharp edge at the same time.

SOUND Knob

The SOUND knob is a controller that is uniquely BOSS. Simply set it to the tone type youʼre looking for. The SOUND knob not only changes gain but sound character as well, from brisk crunch and spectacular drive to earth-shaking ultra high gain.

Road-Tough BOSS

BOSS compact pedals are world-famous for their great sound as well as their road-tough construction, consistency, and reliability. The ST-2 inherits this BOSS-proven design, offering guitarists a solidly constructed pedal thatʼs built to withstand decades of demanding use.

Authentic Amp Stack Sounds from a Stompbox Specs Nominal Input Level-20 dBuInput Impedance1 M ohmNominal Output Level-20 dBuOutput Impedance1 k ohmRecommended Load Impedance10 k ohm or greaterPower SupplyDC 9 V: Carbon-zinc battery (9 V, 6F22)
Alkaline battery (9 V, 6LR61)
AC Adaptor (optional)Current Draw36 mA (DC 9 V)
* Expected battery life under continuous use:
Carbon: 3 hours
Alkaline: 10 hours
These figures will vary depending on the actual conditions of use.AccessoriesOwner’s Manual, Alkaline battery (9 V, 6LR61)
OptionAC adaptor (PSA series)Size and Weight (incl. battery)Width73 mm
2-7/8 inchesDepth129 mm
5-1/8 inchesHeight59 mm
2-3/8 inchesWeight440 g
1 lbs.

Weight 0.40 kg

Reviews

There are no reviews yet.

Be the first to review “BOSS ST-2 PEDAL POWER STACK”

Your email address will not be published. Required fields are marked *

Quick Comparison

BOSS ST-2 PEDAL POWER STACK removeBEHRINGER BEQ700 BASS GRAPHIC EQUALIZER Pedal removeBOSS PH-3 PHASE SHIFTER Pedal removeBEHRINGER TO800 VINTAGE TUBE OVERDRIVE Pedal removeBOSS OS-2 OverDrive/Distortion Pedal removeDIGITECH XBC Bass Multi Chorus Pedal remove
NameBOSS ST-2 PEDAL POWER STACK removeBEHRINGER BEQ700 BASS GRAPHIC EQUALIZER Pedal removeBOSS PH-3 PHASE SHIFTER Pedal removeBEHRINGER TO800 VINTAGE TUBE OVERDRIVE Pedal removeBOSS OS-2 OverDrive/Distortion Pedal removeDIGITECH XBC Bass Multi Chorus Pedal remove
Image
SKU690.ROL.027E005247690.ROL.101E007855690.ROL.035XBC
Rating
Price 115.00 incl. GR VAT 35.00 incl. GR VAT161.08 incl. GR VAT42.00 incl. GR VAT125.23 incl. GR VAT 48.00 incl. GR VAT
Stock

Available on backorder

Only 1 left in stock (can be backordered)

Available on backorder

Only 1 left in stock (can be backordered)

Only 1 left in stock (can be backordered)

Available on backorder

AvailabilityAvailable on backorderOnly 1 left in stock (can be backordered)Available on backorderOnly 1 left in stock (can be backordered)Only 1 left in stock (can be backordered)Available on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentST-2: Power Stack Authentic Amp Stack Sounds from a Stompbox Features From fat crunch to ultra high-gain distortion, the ST-2 Power Stack delivers famous BOSS distortion with a stunning amount of power thatʼs akin to coveted tube amps and professional amp stacks. The SOUND knob simultaneously blends gain amount and sound character, so you can quickly dial up anything from vintage crunch and punchy drive to full-assault distortion. To add further detail to your tone, simply tweak the onboard two-band EQ to taste. The ST-2 is one very unique distortion pedal, calling on BOSSʼ years of amp modeling research to bring you real stack sounds in a compact stompbox.
  • Original distortion sound reminiscent of tube-based stack amplifiers
  • Provides a wide range of tones, from vintage crunch to ultra high-gain modern distortion
  • Faithful and accurate response to picking nuances and volume changes
  • SOUND knob controls both gain level and sound character
  • Two-band EQ with dedicated BASS and TREBLE knobs
  • Road-tough BOSS construction
Authentic Amp Stack Sounds from a Stompbox More Info Tower of Power The ST-2 delivers the playing feel and power that are hallmarks of stack amps. It was derived from BOSSʼ extensive analysis of the sound and characteristics of a vast number of classic guitar amps. This distortion effect delivers authentic tone and expression that responds naturally to picking nuances and volume changes on your guitar. But emulation is only the beginning, as the ST-2 has the ability to go beyond the sound of real amps. Crunch, Drive, Ultra High Gain The ST-2 lets you enjoy a rich, clean tone when playing soft, and smoothly transition into a fat crunch as you play harder — great for rock ballads or songs that require dramatic tone shifts. Imagine the powerful, driving sound of a stack amplifier. An authentic classic-rock tone is here as well, with crisp overtones. Turn up the SOUND knob for a heavy-metal tone. The ST-2 allows extreme high gain, but offers a powerful low-end and sharp edge at the same time. SOUND Knob The SOUND knob is a controller that is uniquely BOSS. Simply set it to the tone type youʼre looking for. The SOUND knob not only changes gain but sound character as well, from brisk crunch and spectacular drive to earth-shaking ultra high gain. Road-Tough BOSS BOSS compact pedals are world-famous for their great sound as well as their road-tough construction, consistency, and reliability. The ST-2 inherits this BOSS-proven design, offering guitarists a solidly constructed pedal thatʼs built to withstand decades of demanding use. Authentic Amp Stack Sounds from a Stompbox Specs Nominal Input Level-20 dBuInput Impedance1 M ohmNominal Output Level-20 dBuOutput Impedance1 k ohmRecommended Load Impedance10 k ohm or greaterPower SupplyDC 9 V: Carbon-zinc battery (9 V, 6F22) Alkaline battery (9 V, 6LR61) AC Adaptor (optional)Current Draw36 mA (DC 9 V) * Expected battery life under continuous use: Carbon: 3 hours Alkaline: 10 hours These figures will vary depending on the actual conditions of use.AccessoriesOwner's Manual, Alkaline battery (9 V, 6LR61) OptionAC adaptor (PSA series)Size and Weight (incl. battery)Width73 mm 2-7/8 inchesDepth129 mm 5-1/8 inchesHeight59 mm 2-3/8 inchesWeight440 g 1 lbs.
Product Features: Shape your sound and eliminate feedback with 7 bands of equalization This BEHRINGER product has been designed to compete head to head with leading products on the market Wide frequency range from 50 Hz to 10 kHz with a powerful 15 dB boost/cut per band Status LED for effect on/off and battery check Runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included) First-class electronic On/Off switch for noise-free operation High-quality components and exceptionally rugged construction ensure long life Conceived and designed by BEHRINGER Germany How the specific frequency bands of the BEQ700 can shape your sound 50 Hz (sub-bass) Boost: To thicken up sub-bass content, which is mostly felt rather than heard Cut: To eliminate stage "rumble” and sub-bass content that can rob sound system power 120 Hz (soft bass) Boost: To enhance the lower end of the bass spectrum Cut: To reduce the tendency of low frequency content to overwhelm a small room 400 Hz (hard bass) Boost: To enhance the "hard” bass punch of fundamental tones Cut: To reduce punch for better linkage with the kick drum 500 Hz Boost: or Cut: To control bass clarity and warmth 800 Hz Boost: To add an aggressive edge to the overall bass sound Cut: For reducing somewhat nasal or horn-like content 4.5 kHz Boost: To make the bass cut through the mix. Creates a more distinctive plucked tone Cut: To eliminate harshness 10 kHz Boost: To bring out the upper harmonics and add edge to the overall bass tonality Cut: Apply a cut to reduce harsh high-frequency content or hiss acrobat_reader_logo. User's Manual

Vintage BOSS phasing effects including 4-, 8-, 10-, and 12-stage phasers, plus new "Rise" and "Fall" effects for unidirectional phasing. Tap tempo sync or realtime control of rate via an Expression/Pedal input.

 

Nominal Input Level-20 dBu
Input Impedance1 M ohms
Nominal Output Level-20 dBu
Output Impedance1 k ohms
Recommended Load Impedance10 k ohms or greater
Residual Noise Level-92 dBu (IHF-A, Typ.)
ConnectorsINPUT Jack, OUTPUT Jack, EXP/CTL Jack, AC Adaptor Jack (DC 9 V)
Power Supply DC 9 V: Dry Battery 9 V type (6F22/9 V), AC Adaptor
Current Draw50 mA (DC 9 V)
AccessoriesDry Battery 9 V type (6F22/9 V)
Options AC Adaptor (PSA-Series), Expression Pedal (Roland EV-5), Footswitch (FS-5U)
Size and Weight ( incl. battery )
Width
73 mm2-7/8 inches
Depth
129 mm5-1/8 inches
Height
59 mm2-3/8 inches
Weight
420 g0 lbs. 15 oz.

 

 

 

VINTAGE TUBE OVERDRIVE TO800

What's bright green and goes from 1 to 11 as fast as you can step on the “On” switch? It’s the very essence of rock ‘n’ roll, our screaming-hot VINTAGE TUBE OVERDRIVE TO800 effects pedal! The classic sound of blazing, overdriven vacuum tubes never goes out of style, and they’re at your command – when you have the VINTAGE TUBE OVERDRIVE TO800 in your effects chain

Vintage Tube-Like Tone

In order to recreate the sound of real-tube crunch, we put the original 4558 op amps and legendary MA150 distortion diodes in the TO800, putting rock’s most powerful overdrive sounds at your disposal. The resulting output is extremely faithful to that of the vintage tone machines that made rock and roll history.

Ease of Use

Dedicated Drive, Tone and Level controls let you shape the exact sound you want. The status LED tells you when this pedal is activated, and the top-quality on/off switch provides the highest signal integrity in bypass mode. You can power the TO800 via a 9 V battery or our PSU-SB DC power supply (not included).
  • Get vintage overdrive, smooth sustain and screaming fat tone
  • Perfect for guitar; great for bass and keyboards, too
  • Uses original 4558 IC plus MA150 distortion diodes for authentic vintage sound
  • Captures every nuance of your playing from smooth overdrive to screaming tube sounds
  • Dedicated Drive, Tone and Level controls for awesome sound shaping
  • Status LED for effect on/off and battery check
  • Runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included)
  • Rugged electronic On/Off switch for noise-free operation

The OS-2 gives players a choice of overdrive or distortion or lets them combine both--all in a single compact pedal. Its distortion maintains the subtle nuances of single-coil guitar pickups.

  • Flexible distortion pedal capable of producing blended overdrive/distortion sounds
  • Provides both "over-the-top" distortion sounds and less extreme overdrive tones for rhythm playing
  • Includes Level, Tone, Drive and Color controls for precise tonal shaping
  • BOSS 5-year warranty

Bass chorus like the world has never known.

The DigiTech XBC Bass Multi Chorus Pedal is designed especially for bass. The XBC Bass Chorus Pedal lets you morph up to 16 bass chorus voices at once for an endless palette of amazingly rich effects. Built-in voice randomization increases with more voices for an even denser wash of killer chorus. DigiTech includes a 9V battery with the XBC Bass Multi Chorus Pedal.

DigiTech XBC Bass Multi Chorus Pedal Features:

  • Designed especially for bass
  • Morph up to 16 bass chorus voices at once
  • Voice randomization increases with more voices
Weight0.40 kg0.50 kg0.42 kg0.50 kg1.20 kg1.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.40 kg
Weight 0.50 kg
Weight 0.42 kg
Weight 0.50 kg
Weight 1.20 kg
Weight 1.00 kg