| Content |
Like the CCM663SR, this is a dual, two-way ceiling speaker combining two offset tweeters and a twin voice coil bass/midrange driver to allow either for a combined stereo signal from one speaker, or for rear-channel surround sound. This speaker features a 150mm (6in) woven glass fibre cone bass/midrange driver and soft dome tweeters, as well as a two-position stereo/surround switch to instantly change between modes. |
1 x 8¨ Mineral Filed Polymer Cone
1 x 1¨ Soft Dome Tweeter in swivel
mount
Amplifier Power 20-100 W/ch
Impedance 8 Ohms
Sensitivity 90Db
Dimensions (cm) 27 x 9
| * Driver Size (dual-cone) 200 mm (8 in)
* Driver Sensitivity (mid-range) (1W [2.83V], 1m, 2k - 6k Hz) 97 dB
* Frequency Range (-10 dB) Driver/Grille Assembly: 50 Hz - 17 kHz
o Installed in CSS-BB backcan: 90 Hz - 17 kHz
* Coverage (2 kHz) 110°
* Driver Continuous Power Handling 20 Watts
* 100V Taps 10W, 5W, 2.5W
* 70V Taps 10W, 5W, 2.5W, 1.3W
* 25V Taps 10W, 5W, 2.5W, 1.3W
* Transformer Insertion Loss 1.5 dB Maximum
* Transformer Connection Bare wire
* Motor Mass 283 g (10 oz)
* Safety Agency: Suitable for use in air handling spaces per UL1480, UL2043, NFPA 90 & NFPA 70, when installed with corresponding UL Listed backcan, below. S7232/UL Listed, Signaling Speaker. Transformer UL registered per UL1876. In accordance with IEC60849/EN60849.
* Matching CSS Backcan CSS-BB8 (0.15 cu ft)
* Bolt Mounting Circle to Backcan 4 points on 286 mm / (11.25 in) diameter
* Cutout Diameter
o Open-back: 216 mm (8.5 in)
o In CSS-BB backcan 295 mm (11.7 in)
* Depth (behind grille) 73 mm (2.9 in)
* Grille Diameter 327 mm (12.9 in)
* Net Weight (ea) 1.58 kg (3.5 lb)
* Shipping Weight (ea) 2.25 kg (5.0 lb)
* Included Accessories 4 pcs M4 x 40 mm sheet metal screws for attaching speaker/driver/transformer assembly to corresponding backcan. |
- Frequency Range (-10 dB) : 34 Hz – 18 kHz In half space (in ceiling)
- Frequency Response (±3 dB) : 47 Hz – 16 kHz In half space (in ceiling)
- Coverage Pattern : 90° conical, broadband (Avg 1k - 16kHz) Average 1 kHz to 10 kHz
- Directivity Factor (Q) : 8.7 (1k - 16kHz)
- Directivity Index (DI) : 9.4 dB (1k - 16kHz)
- Long-Term System : 250 W (1000 W peak), 2 hrs
- Power Rating, IEC3 : 150 W (600 W peak), 100 hrs
- Sensitivity (2.83V@ 1m) : 94 dB measured half-space, 99 dB computed for competitive comparison
- Maximum SPL6 : 118 dB cont ave (124 dB peak)
- Crossover Network : 1.8 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order low-pass to LF.
- Nominal Impedance : 8 ohms
- Transducer Low Frequency Driver : Kevlar reinforced cone, 50 mm (2 in) voice coil.
- Transducer High Frequency Driver : JBL 2412H-1 compression driver, 25 mm (1 in) voice coil.
- Input Connector : Removable locking connector with screw-down terminals. Max wire 12 AWG (2.5 mm2)
- Dimensions (H x W x D) : 366 x 366 mm (14.4 x 14.4 in) square baffle x depth from back of baffle of 223 mm (8.8 in) on 321C
- Net Weight : 16.0 lbs. (7.3 kg)
- Shipping Weight : 19.4 lbs. (8.8 kg)
|
Outer Flange Diameter | Metric :8-3/4” | 22.2 cm
Cut Out Diameter | Metric :7-5/8” | 19.4 cm
Depth from Flange | Metric :4-3/8” | 11.11 cm
Driver Complement :One 1" pure aluminum dome tweeter coaxially mounted in a 6-1/2" bass/midrange driver
Frequency Response :30 Hz – 30 kHz
Impedance :Compatible with 8 Ohm outputs
Recommended Associated Amplifier Power :10 – 200 watts
A/V Receiver Crossover Setting :100 Hz
Inputs :One pair of 5 way binding posts
Available Finishes :Paintable White
Packaging :Two to a carton
Weight | Metric :4.5 lbs | 2.0 kg
Warranty :5 Years |
Full range compact ceiling speakers. Low distortion and a smooth, natural frequency response make the Control 24C Micro ideal for medium volume business music systems as well as for the medium to low SPL segments of larger or louder systems.
Specifications:
- 85 Hz to 20 kHz frequency range
- 30 watts continuous program power (15W pink noise)capacity
- 86 dB sensitivity (1W/1m)
- Shallow steel back-can (only 4 in deep)
|
Reviews
There are no reviews yet.