Content |
Ideal at the centre of most home theatre systems, the HTM62 S2 is the smaller centre speaker that still excels at delivering power and precision.
Like its bigger sibling the HTM61 S2, the HTM62 S2 now features an improved Decoupled Double dome tweeter design, ideal for delivering the clarity needed for dialogue. The double dome delivers a more precise response, while decoupling the tweeter from the main enclosure removes unwanted resonances and vibration. The result is absolutely clear.
The HTM62 S2 also features two 5-inch drivers that use Kevlar cones, for an ideal mix of punch and precision. The result, combined with the Decoupled Double Dome tweeter, is a centre speaker that sounds simply stunning.
The clarity and power of the HTM62 doesn't command a space premium either. Smaller than the HTM61, it's absolutely at home in just about any setup. And like the HTM62, it can be used horizontally or vertically, depending on space.
Woven Kevlar | Yes | Crossover Tuning | Yes | Nautilus Tapering Tube | Yes | Flowport | Yes | Technical features | Decoupled Double Dome aluminium tweeter with NautilusTM tube loading
Kevlar® brand fibre cone bass/midrange
FlowportTM | Description | 2-way vented-box system | Drive units | 1x ø25mm (1 in) aluminium dome high-frequency
2x ø130mm (5 in) woven Kevlar® cone bass/midrange | Frequency range | -6dB at 48Hz and 50kHz | Frequency response | 70Hz - 22kHz ±3dB on reference axis | Dispersion | Within 2dB of reference response
Horizontal: over 20º arc
Vertical: over 60º arc | Sensitivity | 87dB spl (2.83V, 1m) | Harmonic distortion | 2nd and 3rd harmonics (90dB, 1m)
|
|
Tweeter 1¨Dynamic Balance Ring Radiator x1
Mid/Woofer 5 ¼ ¨ Dynamic Balance x2
Frequency Response 40Hz - 27kHz
Nominal Impedance 4 Ohms
Rec. Amplifier Power 20-200 W/Channel
Sensitivity 88dB
Dimensions (cm) 17.78x 55.24 x 22.86
|
Tweeter 1¨Silk Dome Dynamic Balance x1
Mid/Woofer 6 ½¨Dynamic Balance Bi-Laminatex2
Frequency Response 48Hz - 25kHz
Nominal Impedance 8 Ohms
Rec. Amplifier Power 20-150 W/Channel
Sensitivity 91dB
Dimensions (cm) 20.32 x 55.88 x 22.86 |
Frequency Response
60Hz - 35KHz
Sensitivity
86dB
Nominal Impedance
6 Ohms
Power Handling Single (RMS)
100 Watts
System Power Handling (RMS)
150 Watts
Recommended Amplifier Requirements
40-150 Watts
Maximum SPL (dBA)
106
Bass Alignment
Bass reflex - Rear ported
Driver complement
2 x 4” (100mm) C-CAM® cone bass/mid driver
1 x 1” (25mm) C-CAM gold dome tweeter
Cabinet Dimensions (H x W x D)
125 x 330 x 140mm
(415/16 x 13 x 51/2 Inches)
Cabinet Dimensions (H x W x D)(Inc Grille & Terminals)
125 x 330 x 164mm
(415/16 x 13 x 67/16 Inches)
Weight
3.6kg (7lb 14oz)
|
Driver Complements
Mid/Woofer 2 - 3 1/4" Diameter (8.26cm)
Dynamic Balance aerated polypropylene cone with Extended Linear Motion voice coil driver
Midrange
Tweeter 1 - 3/4" Diameter (1.91cm)
Dynamic Balance ring radiator tweeter
Electrical
Overall Frequency Response 90Hz-31kHz
Lower -3dB Limit 115Hz
Upper -3dB Limit 28kHz
Nominal Impedance 8 ohms
Recommended Amplifier Power 10-125 w/channel
Efficiency 90 dB
Inputs Gold-plated 5-way binding posts
Dimensions
Cabinet Size 4 5/16" H x 16 11/16" W x 3 15/16" D
(10.95cm H x 42.39cm W x 10.00cm D)
Mounting Options keyhole slot; one .25 x 20 threaded insert
Enclosure Type Steel-plate reinforced curved enclsoure with time-aligned driver geometry and PowerPort bass venting
Shipping/Other
Product Weight 4.70 lbs. (2.13kgs)
Shipping unit: each
Total Shipping Weight 5.50 lbs. (2.49kgs)
Speaker Warranty 5 years parts and labor (original purchaser)
|
Frequency Response: 45Hz- 100kHz Sensitivity (1W@1M): 89 dB Nominal Impedance: 4 Ohms Maximum S.P.L (Per pair in room): 112.8 dBA Power Handling (RMS): 200 W Recommended Amplifier Requirements (RMS): 60 - 200 W Bass Alignment: Rear Ported HiVe II Technology Mid / H.F Crossover Frequency: 1800 Hz Bass Low Pass Crossover Frequency: 250 Hz Drive Unit Complement: 2 x 6 1/2" RDT bass/mid-range driver 1 x C-CAM high frequency ribbon transducer External Dimensions - Excluding Stand: Width: 583mm (22 15/16 inches) Height: 225mm (8 7/8 inches) Depth: 291.2mm (11 7/16 inches) Stand Dimensions: Width: 610mm (24 inches) Height: 335mm (13 13/16 inches) Depth 463mm (18 1/4 inches) Weight: 19 Kg (41.8lbs) User's Manual AVAILABLE IN THESE COLOR FINISHES
|
Reviews
There are no reviews yet.