Content |
Expanding on the radical design found in the award winning Aero speakers, Aeromax 6 has been tuned to the max to become even better sounding than its predecessor. Available in beautiful, modern, gloss black and white lacquer finishes and with a more coherent and immersive sound, Aeromax 6 is innovative, stylish and ideal for those who want the best stereo performance.
By replacing the traditional tweeter with a BMR (Balanced Mode Radiator) driver, the Aeromax 6 offers a radical improvement in audio quality compared to its rivals. Using the BMR shifts the crossover point between tweeter and woofer away from the usual 3kHz, right at the middle of the human ear\'s most sensitive hearing range, to a less problematic 250Hz. The result is a more natural, immersive and coherent sound. The 4th generation BMR® driver construction also delivers a more room-filling sound by using horizontal vibration modes for a much wider sound. This makes them ideal for modern homes and room layouts where speakers might not end up placed optimally for traditional stereo. You can place the Aeromax 6 where you want and still get great stereo and surround effects.
As well as offering a more coherent sound at the top end, the unique BMR® technology offers advantages at the bottom end too. Aeromax cone drivers and subwoofers are specifically designed to complement the BMR™ drivers - producing cinematic, immersive sound with sumptuous and accurate bass. And with two mid base drivers incorporated into the Aeromax 6 the bass is ground shaking.
New BMR® driver
Aeromax 2 and Aeromax 6 both feature a brand new, 4th generation BMR® driver with exceptional high frequency extension to deliver a crisp and detailed top end
Improved crossover
Aeromax uses ultra high grade crossover components to bring superb levels of detail and transparency
Superior cabinet bracing
Extensively braced cabinets lock the drive units mechanically to the cabinet structure resulting in lower colouration and cleaner dynamics. This is especially important with Aeromax as the drivers are actually high power subwoofers, so the more rigid the cabinet, the better
New speaker terminals
Aeromax 2 and 6 feature brand new, audiophile grade, gold plated speaker terminal posts for the ultimate performance
High grade internal cabling
Oxygen Free Copper (OFC) internal cabling for the purest signal path from the audiophile grade, gold plated terminal posts to the crossover and drive units
Frequency response
30Hz - 22kHz
Recommended amplifier power
25-120 Watts
Drivers
1 x BMR 46mm (2“), 2 x 165mm (6.5“) high power subwoofer
Colour
Black Gloss or White Gloss
Dimensions (WxHxD)
240 x 980 x 344mm (9.4 x 38.6 x 13.5“)
Weight
17kg (37.4lbs)
|
System Format: 3 Way Frequency Response: 32Hz - 35kHz Sensitivity (1W@1M): 90dB Nominal Impedance: 4 Ohms Maximum SPL (dBA): 116.2 Power Handling (RMS): 175W Recommended Amplifier Requirements (RMS): 50 - 175W Bass Alignment: Bass reflex. Twin HiVe®II port System Tweeter Crossover Frequency: LF/MF: 300Hz MF/HF: 2.2 kHz Drive Unit Complement: 2 x 6" RST® Bass drivers. 1 x 6" RST® Bass/Mid driver. 1 x 1" (25mm) C-CAM® gold dome tweeter Product External Dimensions: (H x W x D) inc. plinth & feet 960 x 275 x 388 mm (37 13/16 x 10 13/16 x 15 1/4 inch) Individual Weight: 21.76 Kg (47.88 lb) User's Manual
|
The CM8 is an elegantly proportioned, slimmed down version of the award-winning CM9. A true three-way loudspeaker that will appeal to discerning customers who demand the very best sound quality, but have limited space in which to achieve it.
Like all the models in the CM Series, the CM8 uses crossovers of remarkable simplicity and quality, so what you hear is that much closer to the sound of the original recording. In its functional perfection and understated elegance, itʼs nothing less than a masterpiece. Pure and simple.
All CM Series speakers come with chrome driver trims. Grilles attach magnetically, so there are no unsightly grille-mounting features to spoil the clean lines of the speakerʼs façade. For the finish, you can choose either one of two real-wood veneers in Rosenut or Wengé, the highly polished gloss black or the new stylish white.
30-200watt 8 Ohm
Dimensions: 990x200x300
ALSO AVAILABLE IN ROSENUT AND WENGE COLOR
|
Single Ported HiVe® II technology Sealed Mid-range TLE® 2 x 6.5” long-throw RDT® bass drivers 1 x 4” RDT® mid-range driver 1 x C-CAM® high frequency ribbon transducer All cabinet finishes have hand-upholstered front baffles in Ingleston Black premium grade leather. Finish options: Santos Rosewood veneer with clear gloss piano lacquer Ebony veneer with clear gloss piano lacquer Piano black gloss Optional dedicated floor stands are available Frequency Response: 35 Hz - 100 KHz Sensitivity (1W@1M): 90 dB Nominal Impedance: 4 Ohms Maximum S.P.L (Per pair in room): 117.8 dBA Power Handling (RMS): 250 W Recommended Amplifier Requirements (RMS): 100 - 250 W Bass Alignment: Rear Ported HiVe®II technology Sealed Mid-range TLE® Mid / H.F Crossover Frequency: 3600 Hz Bass Low Pass Crossover Frequency: 600 Hz Drive Unit Complement: 2 x 6.5" long-throw RDT® bass drivers 1 x 4" RDT® mid-range driver 1 x C-CAM® high frequency ribbon transducer External Dimensions - Including Fixed Plinth (H x W x D): 998 x 360 x 375 mm (39 5/16 x 14 3/16 x 14 3/4 inches) Weight (each) Including Plinth: 33Kg (72.7 lbs) User's Manual AVAILABLE IN THESE COLOR FINISHES
|
The largest speaker in the 600 Series. This floorstander is ideal for audiophile stereo and home theatre applications in larger rooms, delivering serious performance and amazing value.
The 683 S2 features a Decoupled Double Dome tweeter - technology evolved from Bowers & Wilkins CM10 speaker. The double dome design uses an extremely thin aluminium dome for lightness, surrounded by a thicker aluminium ring for rigidity. The result is a far more precise treble performance. And while the tweeter looks like it's part of the main speaker, it's physically separated in its own gel-filled cavity, so performance isn't hit by unwanted resonances or vibrations, for a more natural, spacious sound.
Serious and accurate bass performance is equally vital to such a room-filling speaker. That's why the 683 S2 features a new bass driver construction method, using a similar method of bracing to the tweeter with twin layers of aluminium. The richer, distortion-free bass response is sumptuous.
As well as new bass driver construction techniques and a new tweeter, brought in from Bower & Wilkins high-end series, the 683 S2 also boasts an FST Kevlar midrange driver. Serious technology, serious performance, but seriously affordable for a speaker of this calibre.
Woven Kevlar | Yes | Crossover Tuning | Yes | Nautilus Tapering Tube | Yes | Flowport | Yes | Mushrooms | Yes | FST | Yes | Technical features | Decoupled Double Dome aluminium tweeter with NautilusTM tube loading
Kevlar® brand fibre cone FSTTM midrange driver
Dual-layer aluminium cone bass driver
FlowportTM | Description | 3-way vented-box system | Drive units | 1x ø25mm (1 in) aluminium dome high-frequency
1x ø150mm (6 in) woven Kevlar® cone FSTTM midrange
2x ø165mm (6.5 in) aluminium cone bass | Frequency range | -6dB at 30Hz and 50kHz | Frequency response | 52Hz - 22kHz ±3dB on reference axis | Dispersion | Within 2dB of reference response
Horizontal: over 60º arc
Vertical: over 10º arc | Sensitivity | 89dB spl (2.83V, 1m) | Harmonic distortion | 2nd and 3rd harmonics (90dB, 1m)
|
|
Recommended Usage Front Speakers
Type 3-Way Bass Reflex Design
Woofers Dual 8" PMD Cone
MidRange Driver 5" Cone With Waveguide Horn
Tweeters 1" Aluminum Dome With Waveguide Horn
Magnetic Shielding Yes
Twin Bass Reflex Ports Single Port
Gold-Plated Brass Extruded Terminals Bi-Wiring Terminals
Frequency Response 30 Hz - 35 kHz
Sensitivity 89 dB/2.83 V/1 m
Input Power (Maximum / Nominal) 250W / 100W
Impedance 6 Ohms
Product Dimensions (W x H x D) 10-7/8" x 43-5/16" x 15-3/8“
Product Weight (lbs. each) 53.7
|
Reviews
There are no reviews yet.