CAMBRIDGE AUDIO Minx C46 In-Ceiling Speaker (Single)

Original price was: €110.00.Current price is: €109.00. incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Virtually invisible, our wide dispersion in-ceiling speaker has been designed to deliver sound discreetly from any position of your choosing. It uses BMR technology for detailed sound output and is small enough to fit in your hand, its tiny 80mm diameter sitting at less than 3mm when mounted into your ceiling. Sensitivity (SPL)    86dB (2.83 […]

 

Read more

Virtually invisible, our wide dispersion in-ceiling speaker has been designed to deliver sound discreetly from any position of your choosing. It uses BMR technology for detailed sound output and is small enough to fit in your hand, its tiny 80mm diameter sitting at less than 3mm when mounted into your ceiling.

Sensitivity (SPL)    86dB (2.83 Vrms input)
Frequency response    120Hz – 20kHz
Impedance    8 Ohms compatible
Recommended amplifier power    15-200 Watts
Drivers    1 x 2.25ʼʼ (57mm) BMR driver
Dimensions    98mm (3.6ʼʼ) height x 88mm (3.4ʼʼ) diameter (inc. outer bezel)
Inside diameter/mounting hole required: 75mm (3ʼʼ)
Weight    0.46kg (1.01 lbs)

Key Features

    Balanced Mode Radiator (BMR) driver combining bending wave technology for higher frequencies, with pistonic driver movement for lower frequencies
    Single BMR driver to seamlessly cover the entire frequency range from 120Hz to 20kHz
    IP65 rated for suitability in high humidity and dusty environments
    Incredibly wide dispersion from the BMR driver fills the room and virtually eliminates any ʽsweet spotʼ problems
    Metal back box integrated into the product
    Fits into standard 75mm (3ʼʼ) ceiling spotlight mounting hole 

 

 

Weight 0.46 kg

Reviews

There are no reviews yet.

Be the first to review “CAMBRIDGE AUDIO Minx C46 In-Ceiling Speaker (Single)”

Your email address will not be published. Required fields are marked *

Quick Comparison

CAMBRIDGE AUDIO Minx C46 In-Ceiling Speaker (Single) removeJBL CONTROL 62P 2-WAY CEILING LOUDSPEAKER 30W -BLACK- removePOLK AUDIO SC6S 20-100 W/ch In-Ceiling speaker removeJBL CONTROL 24C MICRO Ceiling 2 way speaker removePOLK AUDIO RC80i 20-100 W/ch In-Ceiling speaker PAIR removeYAMAHA NS-IC 600 CELEING LOUDSPEAKER 110W (Pair) remove
NameCAMBRIDGE AUDIO Minx C46 In-Ceiling Speaker (Single) removeJBL CONTROL 62P 2-WAY CEILING LOUDSPEAKER 30W -BLACK- removePOLK AUDIO SC6S 20-100 W/ch In-Ceiling speaker removeJBL CONTROL 24C MICRO Ceiling 2 way speaker removePOLK AUDIO RC80i 20-100 W/ch In-Ceiling speaker PAIR removeYAMAHA NS-IC 600 CELEING LOUDSPEAKER 110W (Pair) remove
Image
SKUMinx C46CONTROL 62PSC6SCONTROL 24C MICRORC-80iS010.31275
Rating
Price Original price was: €110.00.Current price is: €109.00. incl. GR VAT Original price was: €161.36.Current price is: €152.99. incl. GR VAT178.99 incl. GR VAT Original price was: €129.31.Current price is: €107.00. incl. GR VAT249.00 incl. GR VAT Original price was: €203.00.Current price is: €187.00. incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

In stock

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Virtually invisible, our wide dispersion in-ceiling speaker has been designed to deliver sound discreetly from any position of your choosing. It uses BMR technology for detailed sound output and is small enough to fit in your hand, its tiny 80mm diameter sitting at less than 3mm when mounted into your ceiling.

Sensitivity (SPL)    86dB (2.83 Vrms input)
Frequency response    120Hz – 20kHz
Impedance    8 Ohms compatible
Recommended amplifier power    15-200 Watts
Drivers    1 x 2.25ʼʼ (57mm) BMR driver
Dimensions    98mm (3.6ʼʼ) height x 88mm (3.4ʼʼ) diameter (inc. outer bezel)
Inside diameter/mounting hole required: 75mm (3ʼʼ)
Weight    0.46kg (1.01 lbs)

Key Features

    Balanced Mode Radiator (BMR) driver combining bending wave technology for higher frequencies, with pistonic driver movement for lower frequencies
    Single BMR driver to seamlessly cover the entire frequency range from 120Hz to 20kHz
    IP65 rated for suitability in high humidity and dusty environments
    Incredibly wide dispersion from the BMR driver fills the room and virtually eliminates any ʽsweet spotʼ problems
    Metal back box integrated into the product
    Fits into standard 75mm (3ʼʼ) ceiling spotlight mounting hole 

 


 

    * Frequency Response (-10 dB)1: 150 Hz - 20 kHz
    * Frequency Range (±3 dB)1: 200 Hz - 17 kHz
    * Power Capacity:
          o 50 Watts Continuous Program Power (2 hrs)
          o 25 Watts Continuous Pink Noise (2 hrs)
          o 30 Watts Continuous Program Power (100 hrs)
          o 15 Watts Continuous Pink Noise (100 hrs)
    * Nominal Sensitivity:
          o 87 dB (4.0 V, 1 W)
          o 84 dB (2.83 V)
    * Nominal Coverage Angle3: 140° (+25°/-50°)
    * Directivity (Q): 4.7
    * Directivity Index (DI): 6.2 dB
    * Rated Maximum SPL @ 1m: 97 dB continuous pink noise, 103 dB peak
    * Rated Impedance: 16 ohms (no transformer taps)
    * Recommended High-Pass Frequency: 150 Hz

Transducer

    * Driver: 60 mm (2.5 in), polypropylene-coated paper with pure butyl rubber surround, 20 mm (¾ in) copper clad aluminum voice coil with vented Nomex® coil-former.

Enclosure

    * Enclosure Material: High impact polystyrene
    * Grille: Zinc-plated steel grille with powder-coat finish, foam backing (removable for painting)
    * Environmental: Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IP44 capability per IEC 529 - splashproof rating.
    * Termination: Two removable locking euro-block 2-pin connectors with screwdown terminals for bare wire. Connectors paralleled for input and loop-thru. Max. wire 12 AWG (2.5 mm2). Rubber terminal covers included.
    * Suspension: Two identical suspension systems (one as main suspension cable and the other as safety cable), each consisting of 4.5 m (15 ft) long 2 mm (0.077 in) high-tensile galvanized-steel wire rope suspension cable with spring-clips for clipping onto the loudspeaker bracket and Gripple™ brand adjustable-height cable fasteners for infinitely adjustable height. Cables have SWL rating of 45 kg (99 lb).
    * Safety Agency Ratings: Speaker listed per UL1480, transformer registered per UL1876. In accordance with IEC60849/EN60849. Suspension system and Gripple®-brand cable fastener listed per UL1598 and UL2239, TUV, and CSA Class 3426-01 & Class 3426-81.
    * Dimensions: 128 mm (5.1 in) diameter x 121 mm (4.8 in) height to top of cabinet. 141 mm (5.6 in) to top of suspension bracket.
    * Net Weight (ea): 0.7 kg (1.5 lbs)
    * Shipping Weight (pair): 2.0 kg (4.3 lbs)
    * Included Accessories: Two suspension cable systems (see "Suspension“, above), two 2-pin removable locking euro-block connectors, two rubber covers for euro-block connectors.

Driver Complement
Mid/Woofer     1 - 6-1/2" Diameter (16.51cm)
Dynamic Balance polymer composite cone driver
Tweeter     2 - 3/4" Diameter (1.91cm)
Silk Dome Tweeters
Electrical
Overall Frequency Response     40Hz-20kHz
Lower -3dB Limit     55Hz
Upper -3dB Limit     20kHZ
Nominal Impedance     8 ohms
Recommended Amplifier Power     20 - 100 w/channel
Efficiency     89 dB
Dimensions
Overall Diameter     8-15/16“(22.70cm)
Cut-out Diameter     7-5/8“(19.37cm)
Mounting Depth
(assumes 1/2" [12.7mm] wall material)     2-5/8" (6.67cm)
Overall Depth     3-1/8" (7.94cm)
Shipping/Other      
Shipped As     each
Product Weight     2.55 lbs. (1.16kgs) each
Total Shipping Weight     3.00 lbs. (1.36kgs)
Speaker Warranty     Lifetime Warranty

Full range compact ceiling speakers. Low distortion and a smooth, natural frequency response make the Control 24C Micro ideal for medium volume business music systems as well as for the medium to low SPL segments of larger or louder systems.

Specifications:

  • 85 Hz to 20 kHz frequency range
  • 30 watts continuous program power (15W pink noise)capacity
  • 86 dB sensitivity (1W/1m)
  • Shallow steel back-can (only 4 in deep)

1 x 8¨ Mineral Filed Polymer Cone
1 x 1¨ Soft Dome Tweeter in swivel
mount
Amplifier Power 20-100 W/ch
Impedance 8 Ohms
Sensitivity 90Db
Dimensions (cm) 27 x 9

Recommended Usage     In-Ceiling Front / Surround Speakers Type     2-way coaxial Woofers     6 1/2” PP (polypropylene) mica cone Tweeters     1” fluid-cooled soft dome Swivel Tweeter and Midrange Driver     (Tweeters) Paintable Grill with Protective Cover Included     Yes Frequency Response     65 Hz – 28 kHz Sensitivity     90 dB (2.83 V, 1 m) Input Power (Maximum / Nominal)     110W / 40W Impedance     8 Ohms Product Dimensions (W x H x D)     9-1/2“x 4-5/8“ Mounting Depth     4-1/4” Product Weight (lbs. each)     3.3
Weight0.46 kg0.70 kg1.36 kg1.50 kg5.00 kg1.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.46 kg
Weight 0.70 kg
Weight 1.36 kg
Weight 1.50 kg
Weight 5.00 kg
Weight 1.50 kg