Cameo D FORCE 3000 RGB 3000 mW total output power (R: 700 mW, G: 800 mW, B: 1900 mW) Beam alignment without the need for servicing! Dust-proof aluminium casing for minimum maintenance 30 kpps high-speed galvo scanner @ 8° ILDA Analogue modulation for up to 16 million colour shades Precise beams with extremely low divergence […]
3000 mW total output power (R: 700 mW, G: 800 mW, B: 1900 mW)
Beam alignment without the need for servicing!
Dust-proof aluminium casing for minimum maintenance
30 kpps high-speed galvo scanner @ 8° ILDA
Analogue modulation for up to 16 million colour shades
Precise beams with extremely low divergence for razor-sharp projections
Interlock Out for sending the emergency switch-off signal
Control via ILDA
Scan Fail safety system
Neutrik powerCON mains input and output
Thermally activated fan for controlled operating temperature
Compatible with Pangolin Safety diffuser and Pangolin DiscoScan V2 360° wide-angle diffuser with optional adapter (CLLDFORCEAPDSL or CLLDFORCEAPSSL)
The D.FORCE 3000 RGB has a high output of 3,000 mW, and with its pure red, green and blue LED construction, is superior to other DPSS lasers. The beam diameter is 4 x 2 mm with extremely low divergence of less than 1 mrad. The red 638 nm LED has considerably improved visibility over a conventional 650 nm LED, making the D.FORCE 3000 RGB the perfect choice for high-level professional laser shows. Analogue modulation enables the D.FORCE 3000 RGB professional show laser to generate up to 16 million colour shades and create eye-catching, razor-sharp graphics projections
The extremely robust dust-tight aluminium housing features two-layer construction. Optical components are separated from the power supply and the fan, ensuring consistent optimal performance and minimal service requirement. The D.FORCE 3000 RGB has a 30 kpps high-speed galvo @ 8° ILDA and a wide 50° scan area. It features an ILDA interface with 25-pin D-Sub connectors to facilitate control via various software, and a low-noise fan to maintain a low operating temperature. Power connection is via Neutrik PowerCON power input and output sockets, and a locking switch prevents unauthorised operation. The D.FORCE 3000 RGB is equipped with a scan fail safety system for the protection of the audience The easy-access beam alignment system is particularly well designed.
This system saves time and money because the D.FORCE 3000 RGB can easily be calibrated by the user. The D.FORCE 3000 has many application options due to its compatibility with effect and safety diffusers from the company Pangolin.
Product type
Laser
Total power
3000 mW
Colour spectrum
RGB
Wavelength
Blue 445 nm , Green 520 nm , Red 638 nm
Beam Data
2 x 4 mm
Laser sources
Laser diode
Laser Class
4
Scanner
30 kpps @ 8° ILDA
Max. scan angle
50 °
Operating modes
ILDA
Operating voltage
100 V AC – 250 V AC
Power consumption
110 W
Power connector
Neutrik PowerCon
Housing material
aluminium
Cabinet colour
Black
Width
246 mm
Height
238 mm
Depth
175 mm
Weight
7,9 kg
Weight
8.00 kg
Reviews
There are no reviews yet.
Be the first to review “Cameo D FORCE 3000 RGB Laser 3Watt” Cancel reply
3000 mW total output power (R: 700 mW, G: 800 mW, B: 1900 mW)
Beam alignment without the need for servicing!
Dust-proof aluminium casing for minimum maintenance
30 kpps high-speed galvo scanner @ 8° ILDA
Analogue modulation for up to 16 million colour shades
Precise beams with extremely low divergence for razor-sharp projections
Interlock Out for sending the emergency switch-off signal
Control via ILDA
Scan Fail safety system
Neutrik powerCON mains input and output
Thermally activated fan for controlled operating temperature
Compatible with Pangolin Safety diffuser and Pangolin DiscoScan V2 360° wide-angle diffuser with optional adapter (CLLDFORCEAPDSL or CLLDFORCEAPSSL)
The D.FORCE 3000 RGB has a high output of 3,000 mW, and with its pure red, green and blue LED construction, is superior to other DPSS lasers. The beam diameter is 4 x 2 mm with extremely low divergence of less than 1 mrad. The red 638 nm LED has considerably improved visibility over a conventional 650 nm LED, making the D.FORCE 3000 RGB the perfect choice for high-level professional laser shows. Analogue modulation enables the D.FORCE 3000 RGB professional show laser to generate up to 16 million colour shades and create eye-catching, razor-sharp graphics projections
The extremely robust dust-tight aluminium housing features two-layer construction. Optical components are separated from the power supply and the fan, ensuring consistent optimal performance and minimal service requirement. The D.FORCE 3000 RGB has a 30 kpps high-speed galvo @ 8° ILDA and a wide 50° scan area. It features an ILDA interface with 25-pin D-Sub connectors to facilitate control via various software, and a low-noise fan to maintain a low operating temperature. Power connection is via Neutrik PowerCON power input and output sockets, and a locking switch prevents unauthorised operation. The D.FORCE 3000 RGB is equipped with a scan fail safety system for the protection of the audience The easy-access beam alignment system is particularly well designed.
This system saves time and money because the D.FORCE 3000 RGB can easily be calibrated by the user. The D.FORCE 3000 has many application options due to its compatibility with effect and safety diffusers from the company Pangolin.
Product type
Laser
Total power
3000 mW
Colour spectrum
RGB
Wavelength
Blue 445 nm , Green 520 nm , Red 638 nm
Beam Data
2 x 4 mm
Laser sources
Laser diode
Laser Class
4
Scanner
30 kpps @ 8° ILDA
Max. scan angle
50 °
Operating modes
ILDA
Operating voltage
100 V AC - 250 V AC
Power consumption
110 W
Power connector
Neutrik PowerCon
Housing material
aluminium
Cabinet colour
Black
Width
246 mm
Height
238 mm
Depth
175 mm
Weight
7,9 kg
Animation laser with high speed 5 Kpps stepper motor
60° scan angle
Precision beams with minimum divergence
32 pattern presets
DMX, sound and infrared control plus auto function
Master, slave and standalone modes
Display with 4 function keys for easy manual operation
Rugged aluminium enclosure with key switch
Includes handheld infrared remote
Projecting animations with red, green and blue color mixes the WOOKIE 400 RGB delivers an output of 400 mW from 3 mm beam diameter diode and DPSS lasers with no more than 2 mrad divergence.
The Wookie Series animation laser lights provide vibrant, highly visible animations with precision beams, 32 lively pattern presets and high speed 5 Kpps stepper motors with a 60° scan angle. They are controllable via DMX in 3-channel and 9-channel modes, the integrated microphone with adjustable sensitivity and capable of master, slave and standalone operation. Each Wookie laser light sports a compact, high quality aluminium enclosure with 3-pin DMX connectors, IEC mains inlet and adjustable mounting bracket. A key switch prevents unauthorized use, and the bright display with four function keys allows easy manual operation. The Wookie Series laser lights come with a convenient infrared remote control.
Product type
Laser
Total power
400 mW
Colour spectrum
RGB
Wavelength
447 nm , 532 nm , 650 nm
Beam Data
approx. 3 mm / 2 mrad divergence
Laser sources
DPSS , Laser diode
Laser Class
3B
Scanner
High speed stepper motors, 5 kpps
Max. scan angle
60 °
Operating modes
Auto programs , DMX 512 protocol , sound control
DMX input
XLR 3-pin male
DMX output
XLR 3-pin female
DMX mode
3-channel , 9-channel
Controls
Enter , Mode , Value Down , Value Up
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Power consumption
50 W
Power connector
IEC power connector male
Housing material
metal
Cabinet colour
Black
Width
180 mm
Height
90 mm
Depth
192 mm
Weight
2 kg
Description
The best of both worlds: a traditional 2 color laser + laser burst effects combined in one unit!
Fabulous preprogrammed laser shows for all kinds of applications: lounge bar, discotheque, mobile DJ,...
Class 3B laser based on 40mW 532nm green + 200mW 450nm blue laser.
The color of the beams changes all the time using laser blanking technology.
Several working modes:
DMX-control: 1channel for easy operation or 10 channels for full control
Standalone: sound activated (internal mic) or automatic
Master/slave: wonderful synchronized shows
Optional CA-8 remote controller available
Compatible with RF-DMX Converter:
* Set the Radiant laser to 1CH DMX-mode
* Set the RF-DMX Converter to MODE1
Built-in microphone
3-digit LED display for easy menu navigation
Optional CA-8 controller for additional functions available
Key actuated on/off switch and emergency switch (interlock) input for additional safety
Complies to EN/IEC 60825-1 Ed2, 2007-03 for Laser Safety
Cameo STORM 3 in 1 lighting effect, 5 x 3W RGBWA Derby, Strobe and Grating Laser
3-in-1 LED Effect
5 x 3 W RGBWA Derby Effect
150 mW Grating Laser (red 100 mW, green 50 mW)
8 x 1 W Strobe LED´s
10 DMX channels, sound and automatic control
Master and slave operation
Low power consumption
Sturdy metal housing
Universal mounting bracket included
The STORM from Cameo Light combines a Derby effect, laser and strobe in one projector. It can be controlled via 10 DMX channels, automatically or by music and used as master or slave. Razor-sharp laser beams in red and green, up to 30 ultra bright strobe lights per second and the RGBWA Derby effect combine to ensure an animated lighting design aimed to impress.
The STORM features an easy to read display with function buttons and LEDs to show operating modes, a key switch to prevent unauthorised operation, remote shutdown and IEC power input and output. The comfortable adjustable bracket and a locking ring allow for reliable assembly of the projector.
Product type
LED Lighting Effects
Type
LED / Laser / Effects
Colour Spectrum Derby Effect
RGBWA
Number of LEDs Derby Effect
5
LED Type Derby Effect
3 W
Dispersion Derby Effect
68 °
Colour Spectrum Laser Effect
green LED (532 nm) , red LED (650 nm)
Number of Diodes Laser Effect
1 x green , 1 x red
Type of Diodes Laser Effect
red 100 mW, green 50 mW (DPSS laser)
Beam Angle Laser Effect
74 °
Laser Class Laser Effect
3R
Laser Shutdown (safety function)
connection for external emergency stop switch , Remote connection
LX 80G is a high performance features with 80 mW and high precision micro-step scan motors
controlled by high speed processor.
It can be controlled by DMX signal with 7 channels or autonomous through its pre-recorder programs
being able to synchronize more than one LX 80 G (up to 100 units)
The program can be operated with audio signal thanks to the built-in microphone. The effects capacity
is enormous with up to 200 available effects that allow a great combinations variety and the TTL ?blanking?
function, very useful in discotheque and club performances. It is also possible to control PAN/TILT
movements via DMX making a versatile set. The 80 mW REAL power diode is very effective, creating
a powerful beam.
Device: Green Laser.
> Laser Source: 30mW @ 532nm.
> Scan: High precission micro-step motors
precisi?n.
> Control: High capacity processor.
> Operating modes: DMX512, Autonomous, Audio.
> aster/Slave function con linking capacity up to 100 units.
> Effects: 200 effects.
> Supply: 220V AC 50Hz
> Dimensions (mm): 250 x 230 x 190
(L x W x H).
> Weight:3.8 kg.
Sporting diode and DPSS lasers with 3 mm beam diameters and a maximum divergence of 1 mrad only the WOOKIE 200 RGY provides red, green and yellow colors and 200 mW output.
The Wookie Series animation laser lights provide vibrant, highly visible animations with precision beams, 32 lively pattern presets and high speed 5 Kpps stepper motors with a 60° scan angle. They are controllable via DMX in 3-channel and 9-channel modes, the integrated microphone with adjustable sensitivity and capable of master, slave and standalone operation. Each Wookie laser light sports a compact, high quality aluminium enclosure with 3-pin DMX connectors, IEC mains inlet and adjustable mounting bracket. A key switch prevents unauthorized use, and the bright display with four function keys allows easy manual operation. The Wookie Series laser lights come with a convenient infrared remote control.
Item number: CLLWOOKIE200RGY
Product type: LASER
Total power: 200 mW
Colour spectrum: RGY
Wavelength(s): 650nm, 532nm
Beam Data: approx. 3 mm / 1 mrad divergence
Laser sources: Laser diode
Laser class: 3B
Scanner: High speed stepper motors, 5 kpps
Max. scan angle: 60 degrees
Operating modes: DMX-512, Auto, Sound Control
DMX input: 3-pin XLR
DMX output: 3-pin XLR
DMX mode: 3-channel, 9-channel
Controls: Mode, Enter, Value Down, Value Up
Display elements: LED display
Power supply: AC 100-240 V / 50-60 Hz
Power consumption: 50 W
Power connector: IEC power socket male
Housing Material: metal
Housing colour: black
Dimensions (WxDxH): 180 x 90 x 192 mm (excluding bracket)
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
User's manual
Daslight V3 fixtures
Reviews
There are no reviews yet.