| Content |
- Animation laser with high speed 5 Kpps stepper motor
- 60° scan angle
- Precision beams with minimum divergence
- 32 pattern presets
- DMX, sound and infrared control plus auto function
- Master, slave and standalone modes
- Display with 4 function keys for easy manual operation
- Rugged aluminium enclosure with key switch
- Includes handheld infrared remote
Projecting animations with red, green and blue color mixes the WOOKIE 400 RGB delivers an output of 400 mW from 3 mm beam diameter diode and DPSS lasers with no more than 2 mrad divergence.
The Wookie Series animation laser lights provide vibrant, highly visible animations with precision beams, 32 lively pattern presets and high speed 5 Kpps stepper motors with a 60° scan angle. They are controllable via DMX in 3-channel and 9-channel modes, the integrated microphone with adjustable sensitivity and capable of master, slave and standalone operation. Each Wookie laser light sports a compact, high quality aluminium enclosure with 3-pin DMX connectors, IEC mains inlet and adjustable mounting bracket. A key switch prevents unauthorized use, and the bright display with four function keys allows easy manual operation. The Wookie Series laser lights come with a convenient infrared remote control.
Wavelength
447 nm , 532 nm , 650 nm
Beam Data
approx. 3 mm / 2 mrad divergence
Laser sources
DPSS , Laser diode
Scanner
High speed stepper motors, 5 kpps
Operating modes
Auto programs , DMX 512 protocol , sound control
DMX output
XLR 3-pin female
DMX mode
3-channel , 9-channel
Controls
Enter , Mode , Value Down , Value Up
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Power connector
IEC power connector male
Weight
2 kg
|
JB Systems Lounge Laser DMX
Der JB Systems Lounge Laser DMX ist ein Effekt-Laser, der durch eine spezielle Rastertechnologie eine große Anzahl einzelner Laserstrahlen aufteilt, die in alle Richtungen zeigen und so einen verblüffenden, raumfüllenden Effekt erzeugen. Durch die Plug and Play-Funktion werden keine teuren Steuergeräte benötigt. Der JB Systems Lounge Laser DMX kann über die DMX-Steuerung (1 oder 7 Kanäle), Sound-to-Light und Master/Slave Betrieb laufen.
JB Systems Lounge Laser DMX:
- Effekt-Laser
- Betriebsmodi: DMX-Steuerung (1 oder 7 Kanäle), Standalone (musikgesteuert oder automatisch), Master/Slave-Funktion
- Spannungsversorgung: 230 V
- max. Leistung: 128 Watt
- CW Laser grün: 40 mW/532 nm
- CW Laser rot: 150 mW/650 nm
- LED Leistung: 5 Watt/blau
- Laserschutzklasse: 3B
- EN/IEC: N60825-1:1994 + A1:2002 + A2:2002 + COTT
- Maße: 8,6 x 23,3 x 17,6 cm
- Gewicht: 1,6 kg
|
Fantastic laserburst effect using a 532nm 40mW green and 450nm 80mW blue laser
Thanks to special grating technology the beams are split-up in a lot of separate laser beams pointing in all directions to create an amazing, room filling effect.
Perfect for projections on walls and ceilings in bars, bedrooms, parties, etc.
The color of the beams changes all the time using laser blanking technology.
Plug & play: no expensive controllers needed!
A multifunctional infrared remote can be used to control the functions
Standalone mode with built-in microphone or automatic shows can be selected.
All kinds of strobe effects
Adjustable mounting bracket (stand) and power adapter included.
Key actuated on/off switch for additional safety
Complies to EN/IEC 60825-1 Ed2, 2007-03 for Laser Safety
Technical Information
Mains Input: DC 12V / 600mA
Total Power consumption: 5,7W
Sound Control: Internal microphone
Laser Power: 40mW Green CW laser (λ = 532nm) + 80mW Blue CW laser (λ = 450nm)
Laser radiation class: 3B
Beam diameter @ aperture: less than 5mm
Divergence (each beam): less than 2 mrad
Divergence (total output): less than 160°
Working temperature: 10°C to 40°C
Laser Safety Standard: EN/IEC 60825-1 Ed2, 2007-03
Size: 117 x 92 x 46 mm
Weight: 0.35kg |
RGB1w (Red300mw/638nm; Green: 150mw / 532nm; Blue:600mw/440nm) 25kpps scanner ,LCD,SD,X/Y, RGB dimmer
Laser diode Laser power:2000mW
Color Balance:
Red>150mw/638nm ( 150mW/532nm OEM ( 600mw/445 OEM ( | Sporting diode and DPSS lasers with 3 mm beam diameters and a maximum divergence of 1.5 mrad only the LLUKE 1000RGB delivers an output 1,000 mW and red, green and blue color mixes. The red 638 nm diode achieves a significantly better visibility than a conventional 650 nm diode and makes the LUKE 1000 RGB the ideal choice for highly professional laser shows..
The Luke Series professional show lasers utilize an ingenious dual layer design to separate the optical components from the power supply and fan to vastly improve performance. They feature high speed 30 Kpps galvo scanners 8 degrees ILDA, a 60° scan angle and 128 pattern presets for exciting graphics projections with high visibility and pinpoint beams. The Luke laser lights include an ILDA interface on 25-pin D-sub connectors for computer control, 3-pin inputs and outputs for DMX control in 4-channel and 11-channel modes and a built-in microphone with adjustable sensitivity for sound control. In addition, they provide master, slave and standalone capability. The rugged high quality aluminium enclosure sports a key switch to prevent unauthorized use, a bright display with four function keys for manual operation and Neutrik powerCON mains connectors. A low noise fan keeps the compact units quiet and cool, and for audience safety the Luke Series laser lights are equipped with a “Scan Fail Safety” system.
Note: Sharing identical presets, the Luke lasers are compatible with the Ioda series for master and slave operation. With switchable inversion, the master and slave combo is capable of producing the most interesting and impressive laser show effects.
- Item number: CLLLUKE1000RGB
- Product type: LASER
- Total power: 1000 mW
- Colour spectrum: RGB
- Wavelength(s): 638 nm, 532 nm, 447 nm
- Beam Data: approx. 3 mm / 1,5 mrad divergence
- Laser sources: Laser diode & DPSS
- Laser class: 4
- Scanner: High performance galvoscanner, 30 kpps 8 degrees ILDA
- Max. scan angle: 60 degrees
- Operating modes: ILDA, DMX-512, Auto, Sound Control
- DMX input: 3-Pin XLR
- DMX output: 3-Pin XLR
- ILDA input: 25-pin Sub-D male
- ILDA output: 25-pin Sub-D female
- DMX mode: 4-channel, 12-channel
- Controls: Mode, Enter, Value Down, Value Up
- Display elements: LC display
- Power supply: AC 100-240 V / 50-60 Hz
- Power consumption: 100 W
- Power connector: Neutrik PowerCon
- Housing Material: aluminium
- Housing colour: black
- Dimensions (WxDxH): 215 x 157 x 225 mm (excluding bracket)
| Projecting red, green and blue color mixes with 700 mW output power the LLUKE 700 RGB includes diode and DPSS lasers with 3 mm beam diameters and no more than 2 mrad divergence.
The Luke Series professional show lasers utilize an ingenious dual layer design to separate the optical components from the power supply and fan to vastly improve performance. They feature high speed 30 Kpps galvo scanners 8 degrees ILDA, a 60° scan angle and 128 pattern presets for exciting graphics projections with high visibility and pinpoint beams. The Luke laser lights include an ILDA interface on 25-pin D-sub connectors for computer control, 3-pin inputs and outputs for DMX control in 4-channel and 11-channel modes and a built-in microphone with adjustable sensitivity for sound control. In addition, they provide master, slave and standalone capability. The rugged high quality aluminium enclosure sports a key switch to prevent unauthorized use, a bright display with four function keys for manual operation and Neutrik powerCON mains connectors. A low noise fan keeps the compact units quiet and cool, and for audience safety the Luke Series laser lights are equipped with a “Scan Fail Safety” system.
Note: Sharing identical presets, the Luke lasers are compatible with the Ioda series for master and slave operation. With switchable inversion, the master and slave combo is capable of producing the most interesting and impressive laser show effects.
- Item number: CLLLUKE700RGB
- Product type: LASER
- Total power: 700 mW
- Colour spectrum: RGB
- Wavelength(s): 650 nm, 532 nm, 447 nm
- Beam Data: approx. 3 mm / 2 mrad divergence
- Laser sources: Laser diode & DPSS
- Laser class: 4
- Scanner: High performance galvoscanner, 30 kpps 8 degrees ILDA
- Max. scan angle: 60 degrees
- Operating modes: ILDA, DMX-512, Auto, Sound Control
- DMX input: 3-Pin XLR
- DMX output: 3-Pin XLR
- ILDA input: 25-pin Sub-D male
- ILDA output: 25-pin Sub-D female
- DMX mode: 4-channel, 12-channel
- Controls: Mode, Enter, Value Down, Value Up
- Display elements: LC display
- Power supply: AC 100-240 V / 50-60 Hz
- Power consumption: 75 W
- Power connector: Neutrik PowerCon
- Housing Material: aluminium
- Housing colour: black
- Dimensions (WxDxH): 215 x 157 x 225 mm (excluding bracket)
|
Reviews
There are no reviews yet.