CAV DC-60 CENTER 2-WAY LOUDSPEAKER 100W

Design: 2 Way, 3 loudspeakers
Tweeter: 1 "
Mid / Woofer: 2 × 4.5 "
Power: 100 Watt Impedance: 8 Ohms Sensitivity: 88dB
Frequency response: 100Hz ~ 20kHz
Dimensions: 460X178X156mm

Frequency Response: 45Hz- 100kHz
Sensitivity (1W@1M): 89 dB
Nominal Impedance:
4 Ohms
Maximum S.P.L
(Per pair in room): 112.8 dBA
Power Handling (RMS): 200 W
Recommended Amplifier Requirements (RMS): 60 - 200 W
Bass Alignment: Rear Ported HiVe II Technology
Mid / H.F Crossover Frequency: 1800 Hz
Bass Low Pass Crossover Frequency: 250 Hz
Drive Unit Complement: 2 x 6 1/2" RDT bass/mid-range driver
1 x C-CAM high frequency ribbon transducer
External Dimensions -
Excluding Stand: Width: 583mm (22 15/16 inches)
Height: 225mm (8 7/8 inches)
Depth: 291.2mm (11 7/16 inches)
Stand Dimensions: Width: 610mm (24 inches)
Height: 335mm (13 13/16 inches)
Depth 463mm (18 1/4 inches)
Weight: 19 Kg (41.8lbs)

User's Manual

AVAILABLE IN THESE COLOR FINISHES

Frequency Response: 32 Hz - 100 KHz
Sensitivity (1W@1M): 90 dB
Nominal Impedance:
4 Ohms
Maximum S.P.L
(Per pair in room): 117.8 dBA
Power Handling (RMS): 250 W
Recommended Amplifier Requirements (RMS): 100 - 250 W
Bass Alignment: Twin Ported HiVe II Technology
Sealed Mid-range TLE
Mid / H.F Crossover Frequency: 4000 Hz
Bass Low Pass Crossover Frequency: 550
Drive Unit Complement: 2 x 8 long-throw RDT bass drivers
1 x 4" RDT Mid-range driver
1 x C-CAM high frequency ribbon transducer
External Dimensions -
Excluding Stand (H x W x D): 288 x 800 x 368 mm
(11 5/16 x 31 1/2 x 14 1/2 inch)
Stand External Dimensions -
Including Plinth Feet
(H x W x D): 335 x 610 x 463 mm
(13 13/16 x 24 x 18 1/4 inch)
Weight: 33.5 Kg (73.8lbs)

User's Manual

AVAILABLE IN THESE COLOR FINISHES

Driver Complements
Mid/Woofer     2 - 3 1/4" Diameter (8.26cm)
Dynamic Balance aerated polypropylene cone with Extended Linear Motion voice coil driver
Midrange    
Tweeter     1 - 3/4" Diameter (1.91cm)
Dynamic Balance ring radiator tweeter
Electrical
Overall Frequency Response     90Hz-31kHz
Lower -3dB Limit     115Hz
Upper -3dB Limit     28kHz
Nominal Impedance     8 ohms
Recommended Amplifier Power     10-125 w/channel
Efficiency     90 dB
Inputs     Gold-plated 5-way binding posts
Dimensions
Cabinet Size     4 5/16" H x 16 11/16" W x 3 15/16" D
(10.95cm H x 42.39cm W x 10.00cm D)
Mounting Options     keyhole slot; one .25 x 20 threaded insert
Enclosure Type     Steel-plate reinforced curved enclsoure with time-aligned driver geometry and PowerPort bass venting
Shipping/Other
Product Weight     4.70 lbs. (2.13kgs)
Shipping unit:     each
Total Shipping Weight     5.50 lbs. (2.49kgs)
Speaker Warranty     5 years parts and labor (original purchaser)

2 x 5 ¼ ¨ Polymer Composite Cone
with Rubber Surround
1 x 1¨Silk Polymer Dome Tweeter
Amplifier Power 20-180 W/ch
Impedance 8 Ohms
Sensitivity 89dB
Dimensions (cm) 17 x 50 x 22

System Format:    2 Way
Frequency Response:    55 Hz - 60 kHz
Sensitivity (1W@1M):    89 dB
Nominal Impedance:    8 ohms
Maximum S.P.L
(Per pair in room):    111.5 dBA
Power Handling (RMS):    150 W
Recommended Amplifier Requirements (RMS):    100 - 150 W
Bass Alignment:    Sealed Cabinet
Crossover Frequency:    2.8 kHz
Drive Unit Compliment:    2 x 5.5" RST bass/mid-range driver
1 x C-CAM H.F ribbon transducer
External Dimensions excl Stand (H x W x D)

172 x 461 x 303 mm
(6 11/16 x 18 1/8 x 11 15/16 inch)
Weight (each) Excluding stands:    6 Kg (13.25 lbs)