CROWN I-T9000 HD POWER AMPLIFIER 3500W 4Ω

Low weight switching final power amplifier. Power 2X3500W / 4Ω, 2Χ4700W / 2Ω. 7000W bridged 8Ω. New integrated BSS OMNIDRIVE 4bit / 192kHz processor with Cirus Logic SHARC A / D and D / A Converters. LevelMAX peak voltage and RMS compressing, limiting, New hi-end FIR and IIR filters, 2sec delay / channel, as well as DSP presets for various speakers. LCD display on the front panel. USB input on the front panel for loading firmware and Speakers Tunning presets. Analog inputs with XLR, digital input AES / EBU, ethernet input RJ-45 with TCP / IQ protocol. Advanced 3rd generation power supply that allows the amplifier to operate at any voltage. Cooling circuit with microprocessor control with adjustable speed depending on the temperature. Analog and digital outputs (THRU) XLR. Exits speakon 5-way binding post, ground lift switch. Made of cast aluminum, height 2U rack. Suitable for P.A applications but also permanent installations. Weight 10.5kg

BASIC Series - Intelligent Power

BASIC - that's meeting the tightest budgets and professional requirements
in reliability, flexibility and sound. Alone or in combination with the other
products of the Bittner portfolio.
The consequent realisation of the Bittner quality standards indicates once
more our understanding of the contracting business. It underlines our philosophy
that cost consciousness has nothing to do with giving up standards. Compromise
is a word unknown to Bittner Audio!
The incorporation of detent potentiometers, clip limiter, protection circuits for
any imaginable situation, as well as a first-class production process using only
highest-quality components made the BASIC series the choice of most contractors.

Certainly more than basic!

High Tech SMT design
Excellent sound and superior impulse response
Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
XLR Inputs
Speakon and Binding Posts
Clip Limiter
Toroidal transformers
LED Indicators for SIGNAL, CLIP, PROTECT, POWER
Temperature controlled, variable speed, low noise fans
Detent potentiometers
Stereo / Bridged / Parallel Mode
Ground Lift
Robust Steel Chassis
3 Year Warranty

TECHNICAL DATA:
Basic 400:  2x 200 W @ 4 Ohm 
Class:  AB
Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB)
THD: < 0.03%
Signal-to-Noise Ratio: < -102 dB
Channel Seperation: > 85 dB
Input Sensitivity:  +6 dBu
Input Clipping:  22 dBu
Input Impedance:  20 kOhm
Damping Factor:  > 400 @ 4 Ohm
Cooling:  2x Fan (temp. reg. variable speed)
Weight:  12 kg.
Dimensions : 2 RU/483x89x265 mm (19" x 3.5" x 12.6“)

The Crown® Macro-Tech® i Series continues the Macro-Tech legacy of unparalleled sonic accuracy and detail, putting sound quality above all else
Patented, cutting-edge Class-I circuitry gets more power out of an amplifier with less waste
Rugged construction ensures that all Macro-Techs are built to withstand years of abuse on the road
Global Power Supply — designed to deliver maximum power no matter what country you work in
Built-in load, line voltage, input and output monitoring
Standard Ethernet networking via System Architect® lets system operators monitor and control the amplifier from any location

Performance 
Frequency Response (at 1 watt, 20Hz - 20 kHz into 8 ohms) ± 0.25 dB 
Signal to Noise Ratio below rated full-bandwidth power,
A-weighted  > 108 dB 
Total Harmonic Distortion (THD) at 1 watt into 8 ohms Total Harmonic Distortion (THD) Plus Noise at full rated power Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to –30 dB  Damping Factor (20 Hz to 100 Hz at 8 ohms)  > 5000 
Crosstalk (below rated power, 20 Hz to 1 kHz)  > 80 dB
Common Mode Rejection (CMR) (20 Hz to 1 kHz)  > 55 dB, typically > 70 dB
DC Output Offset (Shorted input)  Input Impedance (nominal)  10 kilohms balanced, 5 kilohms unbalanced 
Maximum Input Level  +20 dBu typical
Load Impedance (Note: Safe with all types of loads)
 Stereo: 1/2/4/8/16 ohms     Bridge Mono: 2/4/8 ohms 
Input Sensitivity (referenced to 8 ohm rated output) 1.4V, 32 dB gain, and 26 dB gain
Voltage Gain (referenced to 8 ohm rated output) MAi-5000i:
37.1 dB to 22.2 dB MAi-9000i:
37.9 dB to 23.0 dB MAi-12000i:
39.3 dB to 24.5 dB
Required AC Mains  Universal AC input, 100-240VAC , 50/60 Hz (±15%). Maximum AC mains voltage 264VAC.
AC Line Connector  Five cordsets supplied with amplifier (USA, UK, European, Australia, India)
Construction 
Cooling  Dual-zone, microprocessor controlled, continuously variable speed fans,
front-to-back airflow
Front Panel  Cast aluminum with integrated handles.
Weight 28 pounds (12.7 kg) net, 36 pounds (16.3 kg) shipping. 
Dimensions (W x H x D)  19 in. (48.3 cm) W x 3.5 in. (8.9 cm) H x 16.2 in. (41.1 cm) D.
Protection Amplifier is protected against reactive loads, faults and shorts. If one channel experiences a catastrophic failure, the entire amplifier will shut down.

4-ohm Dual (per ch): 4,000W
8-ohm Dual (per ch): 2,100W
4-ohm Bridge: 7,000W
8-ohm Bridge: 8,000W

Τελικός Ενισχυτής Switching, ισχύος 2X3000W/4Ω, bridged 6000W/4Ω, με ενσωματωμένο επεξεργαστή DSP με έτοιμα preset για διάφορα ηχεία, EQ, limiting, compression, delay, crossover frequencies και subharmonic synthesizer για κάθε κανάλι. Είσοδοι τύπου Phoenix & HD-15, έξοδοι τύπου Barrier Strip, διαχείριση μέσω με Η/Υ (USB) συμβατότητα με HiQnet. Κατάλληλος για κινηματογραφική χρήση, 15 έτοιμα εργοστασιακά preset για κινηματογραφικά ηχεία JBL. Βάρος 10,6 Kg.