Dali Oberon 1 Bookshelf Loudspeakers 2-way (pair) LIGHT OAK

The DALI OBERON 1 is a ultra compact bookshelf speaker. The cabinet size enables an optimal balance between inner volume for bass performance and a compact appearance for easy integration - suited for smaller rooms, discreet audio setups or wall mounting. It features the same oversized 29 mm ultra-lightweight soft dome tweeter as its floor-standing siblings, and a SMC based 5.25" wood fibre woofer to handle lower midrange and bass. The OBERON 1 is based on the most innovative DALI ideas, traditions and inventions - united in a sleek compact design.

The driver materials, crossover design and geometry applied in the OBERON series has been selected to achieve a wide dispersion pattern. This ensures a well-integrated sound, even when listening at a significant off-axis angle. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion. This is why all DALI speakers are not designed to be toed-in.

The rounded edges and rustic fabric of these new DALI front grilles add a lighter and more contemporary visual look to the OBERON series. This look is enhanced by the elegantly shaped aluminium base mounted on the two floor-standing models.

The OBERON woofer features a wood fibre cone with a blend of fine grain paper pulp, reinforced with wood fibres, which creates a stiff, light-weight and well-behaving structure. In combination with a low-loss surround and spider suspension, this cone reproduces the micro details in the signal - unfiltered and with high accuracy.

The iron pole piece of the OBERON woofer magnet is crowned by a patented SMC disk - minimizing the negative effects of the iron. The use of the SMC disk greatly reduces mechanical distortion, which lowers third order distortion. This allows for a longer listening pleasure, a relaxed midrange and a surprising amount of detail for its price class.

• Frequency Range (+/-3 dB) [Hz]: 51 - 26,000
• Sensitivity (2,83 V/1 m) [dB]: 86
• Nominal Impedance [ohms]: 6
• Maximum SPL [dB]: 106
• Recommended Amplifier Power [W]: 25 - 100
• Crossover Frequency [Hz]: 2,800
• Crossover Principle: 2-way
• High frequency driver, Quantity: 1 x 29 mm
• High frequency driver, Diaphragm type: Soft Textile Dome
• Low frequency driver, Quantity: 1 X 5.25“
• Low frequency driver, Diaphragm type: Wood Fibre Cone
• Enclosure type: Bass Reflex
• Bass Reflex Tuning Frequency [Hz]: 50
• Connection Input: Single Wire
• Recommended Placement: Shelf or stand
• Recommended Distance From Wall [cm]: 1 - 50
• Dimensions With Base (HxWxD) [mm]: 274 x 162 x 234
• Weight [kg]: 4.2
• Accessories Included: Manual, Rubber Feet, Front Grille
  

System Format: 2 Way
Frequency Response: 55 Hz - 60 kHz
Sensitivity (1W@1M): 86 dB
Nominal Impedance: 8 ohms
Maximum S.P.L
(Per pair in room): 109.8 dBA
Power Handling (RMS): 100 W
Recommended Amplifier Requirements (RMS): 50 - 100 W
Bass Alignment: Bass reflex. HiVe port system
Crossover Frequency: 2.3 kHz
Drive Unit Compliment: 1 x 5.5" RST bass/mid-range driver
1 x C-CAM H.F ribbon transducer
External Dimensions excl Stand (H x W x D)

300 x 170 x 263 mm
(11 13/16 x 6 11/16 x 10 3/8 inch)
Weight (each) Excluding stands:
7.5 Kg (16.5 lbs)

AVAILABLE IN SIX COLOR FINISHES

Woven Kevlar    
Crossover Tuning    
Nautilus Tapering Tube    
Flowport    
Technical features     Nautilus™ tube loaded aluminium dome tweeter

Kevlar® brand fibre cone bass / midrange

Flowport™
Description     2-way vented-box system
Drive units     1x ø25mm (1 in) aluminium dome high-frequency

1x ø130mm (5 in) woven Kevlar® cone bass / midrange
Frequency range     -6dB at 45Hz and 50kHz
Frequency response     55Hz - 22kHz ±3dB on reference axis
Dispersion     Within 2dB of reference response
Horizontal:     over 60º arc
Vertical:     over 10º arc
Sensitivity     84dB spl (2.83V, 1m)
Harmonic distortion     2nd and 3rd harmonics (90dB, 1m)

Item    Value
System Format:     2 Way
Frequency Response:     55 Hz - 60 kHz
Sensitivity (1W@1M):     86 dB
Nominal Impedance:     8 ohms
Maximum S.P.L
(Per pair in room):     109.8 dBA
Power Handling (RMS):     100 W
Recommended Amplifier Requirements (RMS):     50 - 100 W
Bass Alignment:     Bass reflex. HiVe port system
Crossover Frequency:     2.3 kHz
Drive Unit Compliment:     1 x 5.5" RST bass/mid-range driver
1 x C-CAM H.F ribbon transducer

External Dimensions excl Stand (H x W x D)
    300 x 170 x 263 mm
(11 13/16 x 6 11/16 x 10 3/8 inch)
Weight (each) Excluding stands:     

7.5 Kg (16.5 lbs)

System Format: 2 Way
Frequency Response: 42 Hz - 60 kHz
Sensitivity (1W@1M): 88 dB
Nominal Impedance: 8 ohms
Maximum S.P.L
(Per pair in room): 112.6 dBA
Power Handling (RMS): 120 W
Recommended Amplifier Requirements (RMS): 60 - 120 W
Bass Alignment: Bass reflex. HiVe port system
Crossover Frequency: 2.7 kHz
Drive Unit Compliment: 1 x 6.5" RST bass/mid-range driver
1 x C-CAM H.F ribbon transducer
External Dimensions excl Stand (H x W x D)

362 x 210 x 303 mm
(14 3/8 x 8 1/4 x 11 15/16 inch)
Weight (each) Excluding stands: 9.9 Kg (21.75 lbs)

AVAILABLE IN SIX COLOR FINISHES

The M-1 has been engineered with the same design attributes and ethos as B&Wʼs larger ranges. Perhaps the most striking thing about the M-1 is the weight and strength of its curved aluminium cabinet. This is combined with a strong, glass-loaded ABS front baffle. Together they provide an excellent cabinet: the curved aluminium is stiff and the ABS offers excellent and appropriate damping characteristics.

The M-1ʼs drive units were developed by Bowers & Wilkins specifically for the design. The metal dome tweeter benefits from refinements developed for the new B&W 800 Series and includes Nautilus™ tube loading and neodymium magnets. The glass fibre bass/midrange coneʼs ability to absorb standing waves has been further enhanced by the inclusion of five strategically placed resin filled slots that further minimise distortion.

The result of this detailed cabinet and drive unit engineering has allowed B&Wʼs engineers to borrow another feature from the new 800 Series and utilise the simplest of electronic equalisation in the M-1ʼs crossover. Each of the drive units is fed by only a single, carefully selected component. This approach to crossover design, although painstaking as it relies on optimising all of the physical components in a design, is crucial in achieving its aim of neither adding to nor subtracting from the original signal.

The M-1 is available in three colour options - black, white and silver, each with chromium plated stem and table base.