| Content | With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility.
This large floor-standing OBERON 7 speaker features 2 x 7” wood fibre SMC based woofers and an oversized 29 mm ultra-lightweight soft dome tweeter.
This, combined with the large but elegant cabinet, delivers the very best in deep bass and large room performance. Despite its size, this speaker is surprisingly delicate and will impress with its ability to render any music style naturally and lifelike even at lower volumes. This makes the OBERON 7 perfect for almost any audio setup and any music or movie style.
With the OBERON 7, we have made it easy to integrate your loudspeakers into any room. Both the driver materials and geometry applied in the OBERON 7 has been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover.
As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.
DALI OBERON 7 SPECS
| Product series |
OBERON |
| Frequency Range (+/-3 dB) [Hz] |
36 - 26,000 |
| Sensitivity (2,83 V/1 m) [dB] |
88.5 |
| Nominal Impedance [ohms] |
6 |
| Maximum SPL [dB] |
110 |
| Recommended Amplifier Power [W] |
30 - 180 |
| Crossover Frequency [Hz] |
2,300 |
| Crossover Principle |
2-way |
| High frequency driver, Quantity |
1 x 29 mm |
| High frequency driver, Diaphragm type |
Soft Textile Dome |
| Low frequency driver, Quantity |
2 X 7“ |
| Low frequency driver, Diaphragm type |
Wood Fibre Cone |
| Enclosure type |
Bass Reflex |
| Bass Reflex Tuning Frequency [Hz] |
39.5 |
| Connection Input |
Single Wire |
| Recommended Placement |
Floor |
| Recommended Distance From Wall [cm] |
20 - 80 |
| Dimensions With Base (HxWxD) [mm] |
1015 x 200 x 340 |
| Weight [kg] |
14.8 |
| Accessories Included |
Manual
Rubber Feet
Spikes
Front Grille |
|
PRICE PER SPEAKER
Specifications | Recommended Usage | Front Speakers | | Type | 3-Way Bass Reflex Design |
|---|
| Woofers | Dual 6-1/2" PMD Cone |
|---|
| MidRange Driver | 5" Cone With Waveguide Horn |
|---|
| Tweeters | 1" Aluminum Dome With Waveguide Horn |
|---|
| Magnetic Shielding | Yes |
|---|
| Twin Bass Reflex Ports | Single Port |
|---|
| Gold-Plated Brass Extruded Terminals | Bi-Wiring Terminals |
|---|
| Frequency Response | 30 Hz - 35 kHz |
|---|
| Sensitivity | 88 dB/2.83 V/1 m |
|---|
| Input Power (Maximum / Nominal) | 250W / 100W |
|---|
| Impedance | 6 Ohms |
|---|
| Product Dimensions (W x H x D) | 8-3/4" x 38-9/16" x 13-9/16“ |
|---|
| Product Weight (lbs. each) | 20 Kg
|
|---|
| System Format: 3 Way
Frequency Response: 30 Hz - 60 kHz
Sensitivity (1W@1M): 90 dB
Nominal Impedance: 8 ohms
Maximum S.P.L
(Per pair in room): 116.8 dBA
Power Handling (RMS): 200 W
Recommended Amplifier Requirements (RMS): 100 - 200 W
Bass Alignment: Bass reflex. HiVe port system
Crossover Frequency: L.F - M.F: 790 Hz
M.F - H.F: 2.3 kHz
Drive Unit Compliment: 2 x 6.5" RST bass driver
1 x 4" RST mid-range driver
1 x C-CAM H.F ribbon transducer
External Dimensions excl Stand (H x W x D)
1060 x 210 x 330 mm
(41 3/4 x 8 1/4 x 13 inch)
Weight (each) Excluding stands: 27.2 Kg (59.9 lbs) |
Driver Complements
Subwoofer 2 - 6" Diameter (15.24cm)
Dynamic Balance Cassini Ovals with Super Cell Aerated Polypropylene diaphragms 2 - 5" Diameter (12.70cm)
Dynamic Balance Cassini Ovals with Super Cell Aerated Polypropylene diaphrams
Mid/Woofer 1 - 6 1/2" Diameter (16.51cm)
Dynamic Balance driver with Super Cell Aerated Polypropylene cone 1 - 5 1/4" Diameter (13.34cm)
Dynamic Balance driver with Super Cell Aerated Polypropylene cone
Midrange 1 - 3 1/4" Diameter (8.26cm)
Dynamic Balance driver with Super Cell Aerated Polypropylene cone 1 - 3 1/4" Diameter (8.26cm)
Dynamic Balance driver with Super Cell Aerated Polypropylene cone
Tweeter 1 - 1" Diameter (2.54cm)
Dynamic Balance Enhanced Ring Radiator Tweeter 1 - 1" Diameter (2.54cm)
Dynamic Balance Ehanced Ring Radiator tweeter
Electrical
Overall Frequency Response 20Hz-40kHz 22Hz-40kHz
Lower -3dB Limit 38Hz dB 42Hz dB
Upper -3dB Limit 30kHz dB 30kHz dB
Nominal Impedance compatible with 8 ohm outputs ohms compatible with 8 ohm outputs ohms
Recommended Amplifier Power 20-300 w/channel 20-250 w/channel
Efficiency 88 dB 88 dB
Crossover Orth Crossover Orth Crossover
Crossover
(mid-high array) 3000Hz 2800Hz
Crossover
(subwoofer) 100HZ 100Hz
Inputs Dual Gold-Plated Binding Posts Dual Gold-Plated Binding Posts
Dimensions
Cabinet Size 50 13/16" H x 9 1/2" W x 18 7/16" D
(129.06cm H x 24.13cm W x 46.83cm D) 47" H x 8 5/16" W x 14 3/8" D
(119.38cm H x 21.11cm W x 36.51cm D)
Footprint Size 10 1/2" W x 20 5/16" D
(26.67cm W x 51.59cm D) 9 1/4" W x 16 1/4" D
(23.50cm W x 41.27cm D)
Mounting Options floor floor
Enclosure Type Sealed Sealed
Enclosure Type
(subwoofer) Dual PowerPort Dual PowerPort bass venting
Shipping/Other
Product Weight 99.20 lbs. (45.00kgs) 78.00 lbs. (35.38kgs)
Shipping unit: each each
Total Shipping Weight 114.70 lbs. (52.03kgs) 86.40 lbs. (39.19kgs)
Speaker Warranty 5 years parts and labor (original purchaser) 5 years parts and labor (original purchaser)
ALSO AVAILABLE IN "EBONY" COLOR
![]()
| Two way, double series reflex
2 x Woofer 130 mm.
Coated paper, double magnet
Tweeter 26 mm.
Soft dome (silky fabric)
Impedance: 8 Ohm (min. 6,5)
RMS POWER: 100 W
MAX POWER: 150W
Efficiency: 90 dB/W/1m
Dimensions: 170x1030x220mm.
Net weight: 16 Kg.
Finish: leather and cherrywood (or walnut vinyl) |
Dimensions | Metric : 4" D x 4-1/16" W x 19-9/16" H | 10.1 x 10.3 x 49.7 cm
Base Dimensions | Metric :5-1/2" D x 6-1/2" W | 14 x 16.5 cm
Driver Complement :One 1" pure aluminum dome tweeter; Two 3-1/2" high definition bass/midrange drivers; Two 3-1/2" pressure coupled bass radiators
A/V Receiver Crossover Setting :120 Hz
Frequency Response :60 Hz – 30 kHz
Inputs :One pair of 5 way binding posts
Impedance :Compatible with 8 Ohms outputs
Enclosure :Aircraft grade extruded aluminum
Sensitivity :89 dB
Available Finishes :Gloss Black
Recommended Associated Amplifier Power :10 – 175 watts
Accessories :Wall bracket; Glass Base
Mounting Options :Vertically Only: On Shelf with included glass base; On wall with included flush mounting bracket
Packaging :One to a carton
Weight | Metric :8 lbs | 3.6 kg
Warranty :5 Years |
Reviews
There are no reviews yet.