| Content | Driver Complement: Two front-firing 5-1/4” woofers, two
front-firing 1.0”aluminum dome tweeters, two side-firing
2.0” full range drivers
6 Channel Amplification: Each woofer, tweeter and fullrange driver has its own dedicated amplifier channel for
greater dynamic range and a greater sense of realism.
Amplification: Woofers 2 x 70W, tweeters and full-range
drivers 4 x 10W
Wireless Connectivity: 2.4GHz & 5.8GHz
Inputs: Optical, Analog, Ethernet, USB-A for firmware
updates and phone charging |
Amplifier power (watts): 20 watts (RMS)
Controls: Volume & power
W x H x D (mm): 387 x 155 x 130
Weight (kg): 2.25
Frequency response (Hz): 70 - 18,000
Connections: Additional stereo input via 3.5mm minijack for use with non-Bluetooth enabled devices
Finish: Black | Denon Professional's Solution Series is designed to be the best friend of audio contractors. Its specialty is solving audio challenges easily and inexpensively by getting signal to someplace that would be otherwise difficult or inconvenient. Simple to install, configure and operate, the Solution Series products belong in the toolbox of every audio installer.
For applications where unsightly cable runs or drilling of holes is not permissible, the DN-202 WT and WR combination is ideal for getting stereo audio from point A to B. The DN-202WT is a wireless audio transmitter with balanced XLR and ¼-inch inputs, enabling users to send audio from a professional audio mixer or source through walls and ceilings up to 100 feet (30m) away. The DN-202WR is the companion receiver, featuring balanced XLR and ¼-inch outputs for connection to loudspeakers or amplification systems. Multiple DN-202WRʼs may be used with a single DN-202WT to optimize sound coverage at an event or split indoor/outdoor/multi-level venues.
Features
- For use with DN-202WR
- Sends audio up to 30m (100 ft) without wires
- XLR and 1/4” audio inputs
- Able to broadcast to multiple receivers (sold seperately)
- External, articulating antennas ensure optimum transmission and reception
- Perfect for event spaces, houses of worship, entertainment venues, education, retail, and more
Package Contents
- DN-202WT
- Power adapter (5VDC, 3A, center-positive)
- User Guide
- Safety and warranty manual
| Features
Desktop or portable digital-to-analog convertor
Mac or PC plug-and-play, no drivers to install
High-performance headphone amp included
USB and optical inputs
USB-powered, no separate power supply needed
Stream bit-perfect HD audio with low jitter
Based on high-performance AK4396 DAC
Works With
Any computer (Mac or PC)
Headphones
Apple TV or any product with optical outputs
Powered speakers
Any audio system with mini-jack or RCA inputs
DAC type
Dual Mode USB and Optical (SPDIF)
Inputs
USB/Optical (SPDIF)
Outputs
RCA stereo/3.5mm headphone
D/A converter
AKM4396
Optical receiver
CS8416
USB controller
TI1020B
USB device class
Type 1.1 or above
Full-scale output
2.0V RMS
Output impedance
10 ohms
Power source
USB 5V
Power requirements
5V DC, 200mA
USB power filtering
2-stage redundant regulation
SNR
(DC to 20 kHz) >110dB
THD+N
(1kHz FS 96kS/s) |
Sound Bar Drivers: 6 x 3.0” mid woofer drivers, 3 x 1”
aluminum dome tweeters
Wireless Connectivity: 2.4GHz & 5.8GHz
Inputs/Outputs: HDMI 1.4a in (3), HDMI 1.4a out (1),
Toslink Optical input (1), Analog 3.5 mm mini-jack AUX
(1), USB-A for firmware updates and phone charging
Sub Drivers: Drivers: 1 x 8” sub
Wireless Sub
Wireless Connectivity: 2.4GHz & 5.8GHz |
- For NAVIS Series Speakers
- Wireless Source-to-Speaker Connection
- Sends Uncompressed Audio
- 5 Hz to 22.1 kHz Frequency Range
Go wireless with the AirX2 NAVIS Transmitter from ELAC. Using 2.4 GHz wireless technology, the AirX2 NAVIS offers you the freedom to connect your source to your NAVIS speakers easily and without running unsightly cables across the room. It transmits uncompressed audio and is equipped with a pair of RCA inputs for easy connection to your audio source. Included in the package is a power adapter and a set of international AC plugs.
Wireless
Transmitter Interfaces
| Input Connectors |
1 x 2RCA (Stereo Analog) Female |
Power
| Power Connector |
1 x Barrel (7.5 VDC) Input |
General
| Dimensions |
3.7 x 3.62 x 1.54" / 94 x 92 x 39 mm |
| Weight |
0.44 lb / 0.2 kg |
|
Reviews
There are no reviews yet.