The DN-300R records to both SD and USB media simultaneously – perfect for recording conferences where the client needs a copy of the recording after the event. With outstanding ease-of-use and simple operation, anyone can use the DN-300R right out of the box and record to SD, USB or both. The DN-300R is exactly what […]
The DN-300R records to both SD and USB media simultaneously – perfect for recording conferences where the client needs a copy of the recording after the event. With outstanding ease-of-use and simple operation, anyone can use the DN-300R right out of the box and record to SD, USB or both. The DN-300R is exactly what the market is looking for in terms of a simple but high-quality recording solution for commercial applications. The DN-300R gives installers and contractors the flexibility and convenience they need for total commercial recording capability.
Records WAV and Mp3 files to SD and USB media simultaneously
Simple and easy to use
Powers-up in record-ready mode
Ability to record one media at -10dB for a safety track
Balanced and unbalanced inputs and outputs
Compact 1RU design
Digital Audio System
System: Solid-state SD/USB audio recorder/player
Compatible Media (FAT16, FAT32)
USB Device (mass storage class)
SD/SDHC
SDXC
Supported File Formats
MP3
Sampling frequency: 44.1 kHz
Bit rate: 192, 256 kbps (recording); 64 – 320 kbps and VBR (playback)
Format: MPEG1 Audio Layer 3
File extension: .mp3
WAV
Sampling frequency: 44.1, 48 kHz
Bit depth: 16-bit (44.1 kHz), 24-bit (48 kHz)
Format: Waveform Audio File Format
File extension: .wav
Number of Channels: 2 channels / stereo
Audio Frequency Range: 10 – 20 kHz (± 1.0dB recording, ± 0.8 dB playback)
Signal-to-Noise Ratio
Recording: > 95 dB (1 kHz, 0dB A-weighted)
Playback: > 95 dB (1 kHz, 0dB A-weighted)
Channel Separation
Recording: > 80 dB (1 kHz, 0dB A-weighted)
Playback: > 90 dB (1 kHz, 0dB A-weighted)
Wow and Flutter: < 0.001 %
Distortion
Recording: < 0.008 %
Playback: < 0.006 %
Total Harmonic Distortion: < 0.01% (1 kHz, 0dB A-weighted)
Inputs
Balanced XLR
Nominal level: +4 dBu ± 1 dBu
Minimum level: – 40 dBu
Maximumm level: 20 dBu ± 1 dBu
Input impedance: 18 kΩ
Unbalanced RCA
Nominal Level: -10 dBV (at full scale: -16 dBu)
Minimum input Level: -19 dBV or higher
Input impedance: 22 kΩ ± 10%
Outputs
Balanced XLR
Nominal level: +4dBu ± 1 dBu
Maximum output level: +20 dBu ± 1 dBu
Output impedance: 600 Ω ± 10%
Unbalanced RCA
Nominal level: -10 dBV ± 2 dBV
Minimum output level: 6 dBV ± 2 dBV
Output impedance: 600 Ω ± 10%
Connectors
(2) XLR outputs
(1) 1/4″ (6.35mm) headphone output
(1) RCA stereo output pair
(2) XLR inputs
(1) RCA stereo input pair
(1) USB port
(1) SD card slot
(1) IEC AC power input
Power
Connection: IEC
Input Voltage: 100 – 240 V~, 50/60 Hz
Dimensions (width x depth x height): 19.0″ x 10.92″ x 1.72″ (484 x 277 x 44mm)
Weight: 6.6 lbs (3 kg)
Weight
3.00 kg
Reviews
There are no reviews yet.
Be the first to review “Denon Pro DN-300R SD/USB Recorder” Cancel reply
The DN-300R records to both SD and USB media simultaneously – perfect for recording conferences where the client needs a copy of the recording after the event. With outstanding ease-of-use and simple operation, anyone can use the DN-300R right out of the box and record to SD, USB or both. The DN-300R is exactly what the market is looking for in terms of a simple but high-quality recording solution for commercial applications. The DN-300R gives installers and contractors the flexibility and convenience they need for total commercial recording capability.
Records WAV and Mp3 files to SD and USB media simultaneously
Simple and easy to use
Powers-up in record-ready mode
Ability to record one media at -10dB for a safety track
Balanced and unbalanced inputs and outputs
Compact 1RU design
Digital Audio System
System: Solid-state SD/USB audio recorder/player
Compatible Media (FAT16, FAT32)
USB Device (mass storage class)
SD/SDHC
SDXC
Supported File Formats
MP3
Sampling frequency: 44.1 kHz
Bit rate: 192, 256 kbps (recording); 64 - 320 kbps and VBR (playback)
Format: MPEG1 Audio Layer 3
File extension: .mp3
WAV
Sampling frequency: 44.1, 48 kHz
Bit depth: 16-bit (44.1 kHz), 24-bit (48 kHz)
Format: Waveform Audio File Format
File extension: .wav
Number of Channels: 2 channels / stereo
Audio Frequency Range: 10 - 20 kHz (± 1.0dB recording, ± 0.8 dB playback)
Signal-to-Noise Ratio
Recording: > 95 dB (1 kHz, 0dB A-weighted)
Playback: > 95 dB (1 kHz, 0dB A-weighted)
Channel Separation
Recording: > 80 dB (1 kHz, 0dB A-weighted)
Playback: > 90 dB (1 kHz, 0dB A-weighted)
Wow and Flutter: < 0.001 %
Distortion
Recording: < 0.008 %
Playback: < 0.006 %
Total Harmonic Distortion: < 0.01% (1 kHz, 0dB A-weighted)
Inputs
Balanced XLR
Nominal level: +4 dBu ± 1 dBu
Minimum level: - 40 dBu
Maximumm level: 20 dBu ± 1 dBu
Input impedance: 18 kΩ
Unbalanced RCA
Nominal Level: -10 dBV (at full scale: -16 dBu)
Minimum input Level: -19 dBV or higher
Input impedance: 22 kΩ ± 10%
Outputs
Balanced XLR
Nominal level: +4dBu ± 1 dBu
Maximum output level: +20 dBu ± 1 dBu
Output impedance: 600 Ω ± 10%
Unbalanced RCA
Nominal level: -10 dBV ± 2 dBV
Minimum output level: 6 dBV ± 2 dBV
Output impedance: 600 Ω ± 10%
Connectors
(2) XLR outputs
(1) 1/4" (6.35mm) headphone output
(1) RCA stereo output pair
(2) XLR inputs
(1) RCA stereo input pair
(1) USB port
(1) SD card slot
(1) IEC AC power input
Power
Connection: IEC
Input Voltage: 100 - 240 V~, 50/60 Hz
Dimensions (width x depth x height): 19.0" x 10.92" x 1.72" (484 x 277 x 44mm)
Weight: 6.6 lbs (3 kg)
The Apogee X-VID-SYC-GEN Video Expansion Card is designed to fit in the X-Series card slot located in the rear panel of the Apogee Big Ben Master Digital Clock (sold separately). Allows all functions to be controlled from the Big Ben user interface and generates video and provides genlocking function. In genlocking mode the source video-signal will be re-clocked and regenerated, maintaining the same
field and colorburst phase information, but stripped of its line information and replaced by video-black. In slave mode the board will auto-detect the incoming video-standard and configure itself accordingly. The video input is of very high tolerance and will even lock to unstable sources like VCR's.
The Apogee X-VID-SYC-GEN Video Expansion Board has three modes of operation.
•Master mode: The user selects the video format on the frontpanel of the Big Ben. The Big Ben will slave to the generated video signal
•Attended Slave mode: The video board will be configured to autodetect and genlock to the incoming video. The Big Ben will slave to the incoming video signal
•Unattended Slave mode: The video board will be configured to autodetect and genlock to the incoming video. The Big Ben is not clocking to the Video board and therefore both will function independently
Features
Support for PAL, NTSC and 60 Hz B&W standards
One composite video input and three composite video outputs
Can operate as a master black-burst generator
Can operate as genlocking slave device
Specifications
General
Recording media CompactFlash card
Tested media SanDisk Extreme IV 4 GB, 8 GB, 16 GB
SanDisk Extreme 4 GB, 8 GB, 16 GB
File system FAT32
File format BWF (single-channel, multi-channel)
Number of audio channels 8 channels at 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
8 channels + stereo mix at 44.1 kHZ, 48 kHz
4 channels at 176.4 kHz, 192 kHz
Quantization bit rates 16 bit/24 bit
Sampling frequencies 44.1/47.952/48/48.048/88.2/96/176.4/192 kHz
(47.952/48.048: 48 kHz ± 0.1% pull-up/pull-down)
Reference clock Internal, Word in, Video in,
Digital in (CH 1-2, CH 3-4, CH 5-6, CH 7-8)
Timecode frame rates 23.976, 24, 25, 29.97 DF, 29.97 NDF, 30 DF, 30 NDF
Built-in mic Omni directional, monaural
Low cut filter Cut-off frequency: 40/80/120 Hz
Slope: –12/–18 dB/oct
Analogue audio inputs and outputs
MIC IN/LINE IN connectors (1–8) XLR-3-31 (1: GND, 2: HOT, 3: COLD)
Input impedance (LINE) 10 kOhm
Nominal input level (LINE) + 6 dBu (Ref. level: –9 dB)
+ 4 dBu (Ref. level: Other than –9 dB)
Maximum input level (LINE) Selectable: +15 dBu, +18 dBu, +20 dBu, + 22 dBu, +24 dBu
Input impedance (MIC –25) 2.4 kOhm
Minimum input level (MIC –25) –45 dBu
Maximum iput level (MIC –25) +11 dBu
Input impedance (MIC 0) 2.4 kOhm
Minimum input level (MIC 0) –70 dBu
Maximum input level (MIC 0) –14 dBu
LINE OUT connectors (L/R) XLR-3-32 (1: GND, 2: HOT, 3: COLD)
Output impedance 100 Ohm or less
Nominal output level +6 dBu (Ref. level: –9 dB)
Nominal output level +4 dBu (Ref. level: Other than –9 dB)
Maximum output level Selectable: +15 dBu, +18 dBu, +20 dBu, +22 dBu, +24 dBu
PHONES connector 6.3-mm stereo phone jack
Maximum output power 100 mW + 100 mW or more (THD+N: 1 % or less, at 32 Ohm)
Digital audio inputs and outputs
DIGITAL I/O connector D-Sub, 25-pin connector
Format AES3-2003/IEC60958-4 (AES/EBU)
Minimum input voltage 200 mVpp
Maximum input voltage 7 Vpp
Output voltage 3.5 Vpp
DIGITAL OUT connectors BNC
Format AES3-2003/AES-3id-2001 (AES/EBU)
Output voltage 1 Vpp at 75 Ohm
Control inputs and outputs
EXT DC IN connector XLR-4-32 (1: –, 2: NC, 3: NC, 4: +)
Input voltage 11–16 V (2 A)
CASCADE/WORD/VIDEO IN connector BNC
Input voltage 5 V TTL equivalent
Input impedance 75 Ohm ±10 %
Allowable frequency deviation of external sync ±100 ppm
CASCADE/WORD OUT connector BNC
Output voltage 5 V TTL equivalent
Output impedance 75 Ohm ±10 %
Sampling frequencies 44.1/47.952/48/48.048/88.2/96/176.4/192 kHz
(47.952/48.048: 48 kHz ± 0.1 % pull-up/pull-down)
TIME CODE IN connector BNC
Input voltage 0.5–5 Vpp
Input impedance 10 kOhm
TIME CODE OUT connector BNC
Output voltage 2.0 Vpp
Output impedance 600 Ohm
USB port USB B-type, 4-pin
Format USB2.0 HIGH SPEED (480 MBit/s)
KEYBOARD connector Mini-DIN connector (PS/2)
Audio performance
Frequency response (MIC/LINE IN to LINE OUT)
All sample rates 20 Hz – 20 kHz, 0 dB (±0.5 dB)
88.2/96 kHz sample rates at 40 kHz –1 dB (±1.0 dB)
176.4/192 kHz sample rates at 80 kHz –3 dB (+1/–2 dB)
Distortion
LINE IN to LINE OUT 0.003 % or less (–20 dB reference level, +23 dBu input, 1 kHz, AES-17 LPF)
MIC IN (MIC –25) to LINE OUT 0.02 % or less (–20 dB reference level, –10 dBu input, Trim at +20 dB, 1 kHz, AES-17 LPF)
MIC IN (MIC 0) to LINE OUT 0.02 % or less (–20 dB reference level, –35 dBu input, Trim at +20 dB, 1 kHz, AES-17 LPF)
S/N ratio
LINE IN to LINE OUT 110 dB(A) or more (22 kHz LPF)
MIC IN (MIC –25 or MIC 0) to LINE OUT 100 dB(A) or more (22 kHz LPF)
Computer compatibility
Windows Windows XP, Windows Vista, Windows 7
CPU Pentium 300 MHz or faster
Memory 128 MB or more
USB USB 2.0 port
Macintosh Macintosh Mac OS X 10.2 or later
CPU Power PC G3, G4, Intel Mac 266 MHz or faster
Memory 64 MB or more
USB USB 2.0 port
Recommended USB host controller Intel chipset
Power supply and other specifications
Power requirements 100–240 V AC, 50–60 Hz (AC adaptor PS-1225L)
10 AA batteries (Alkaline or NiMH)
External DC battery (DC 11–16 V, 2 A or more)
Battery operation time (continuous operation) Measured according to JEITA standard at 48 kHz, 24-bit, 8 ch playback or recording, phantom power off. Varies with operating conditions.
NP type battery (Li-Ion: 14.8 V/4.6 Ah) About 5 hours
AA type batteries (NiMH) About 2 hours
Power consumption 18 W
Dimensions (W x H x D) 270 mm x 100 mm x 260 mm (excluding protrusions)
Weight 3.65 kg (excluding batteries)
Operating temperature range 0–40 ºC
UR-80: 24 Bit/96 kHz USB Recording System
Features
Over forty assignable controls
Up to 24-bit/96KHz recording
2x XLR/TRS combo jack with qualified microphone preamp & phantom power
Included HQ-GM2, HyperCanvas software synthesizer
ASIO2.0/WDM, MacOS X compatible drivers, low-latency support.
UR-80 Editor Software Included
V-Link support
Knob8Fader9Rotary Encoder1Button25LED10Number of Memory SetsPreset1User7Number of Audio Record/Playback Channels (Full duplex (except for 96 kHz setting))Record2 channels (stereo)Playback2 channels (stereo)Signal ProcessingAD/DA Conversion24 bits (linear)PC interface24 bitsSampling Frequency24 bitsDigital output44.1/48/96 kHzDigital input32/44.1/48/96 kHz* Built-in realtime sample rate converterAD/DA Conversion44.1/48/96 kHzFrequency Response96.0 kHz20 Hz to 40 kHz (+0 dB/-2 dB)48.0 kHz20 Hz to 22 kHz (+0 dB/-2 dB)44.1 kHz20 Hz to 20 kHz (+0 dB/-2 dB)Nominal Input Level (variable)Input Jack 1, 2 (XLR type)-50 to -10 dBuInput Jack 1, 2 (1/4 inch TRS phone type)-35 to +4 dBuInput ImpedanceInput Jack 1, 2 (XLR type)5 k ohmsInput Jack 1, 2 (1/4 inch TRS phone type, Lo-Z)32 k ohmsInput Jack 2 (Hi-Z)1 M ohmsNominal Output LevelOutput Jack0 dBuOutput ImpedanceOutput Jack1 k ohmsHeadphones160 ohmsResidual Noise LevelOutput Jack-90 dBu or less
(input terminated with 1 k ohms, OUTPUT VOLUME: max., INPUT SENS = min., INPUT MONITOR = min., IHF-A, typ.)InterfaceUSB
Digital input/output Coaxial type
Optical type(conforms to S/P DIF)ConnectorsInput Jack 1, 2 (XLR type (phantom power)
1/4 inch TRS phone type)
Digital In Connectors (Coaxial type, Optical type)
Digital Out Connectors (Coaxial type, Optical type)
Headphones Jack (Stereo 1/4 inch phone type)
Output Jack L/R (RCA phone type)OthersPower SupplyAC adaptorCurrent Draw1000 mAAccessoriesInstallation Guide
Owner's Manual
USB cable
AC adaptor
CD-ROM
Overlay Sheets with Application LabelsSize and WeightWidth379 mm14-15/16 inchesDepth239 mm9-7/16 inchesHeight84 mm3-5/16 inchesWeight1.7 kg3 lbs. 11 oz.
* 8-track Digital Portastudio with CD Burner * Records to SD/SDHC Card media * Import audio tracks from CD * Built-in stereo condenser microphone * Two XLR microphone inputs with phantom power * 1/4" stereo line inputs * Switchable instrument-level input for guitar/bass direct recording * Multi-band mastering effects * 2-band EQ per track * Internal reverb processor with dedicated send per track * Chromatic Tuner and Metronome * Track editing, autopunch and bounce features * Optional RC-3F footswitch offers three switches for punch-in and transport operation * Compact and lightweight * Dimensions: 11.4" W x 2.1" H x 8.2" D * Weight: 4lbs
To further enhance the HD-R1's feature set, Mic preamps (w/20dB pad) and Phantom Power (rear-panel selectable) have been included. The HD-R1 offers a variety of contractor-friendly I/O options; such as, Unbalanced (RCA), Balanced (XLR and Euroblock), and S/PDIF Digital (Coaxial and Optical).
And of course... the traditional source device features are Power-on-Play, Front Panel Rotary Input Level Controls, Headphone Jack with level control, and a variety of Playback Modes.
* 1U Rack-mount Solid-State Recorder
* Compact Flash Card
* USB host interface for USB Flash Cards
* Audio data formats: PCM (16/24 bit), MP3
* Sampling rates supported: 44.1, 48, 88.2, 96kHz
* Mic/Line XLR (with 20dB pad) balanced I/O
* Phantom Power (rear panel switch and front LED indicator)
* Euroblock terminal (Input and Output)
* Unbalanced RCA (Input and Output)
* Front panel rotary input level controls
* RS-232 interface for control
* RJ45 100Mbit/s Ethernet interface for file transfer and control
* 25-pin parallel remote control interface
* 16 Direct Play via D=SUb25 pin parallel interface
* Power on play (front panel selectable)
* S/PDIF Digital In/Out (Coaxial and Optical)
* Headphone Jack w/level control
* Input through and Auto Fade function
* Input monitoring / mixing of live stereo input along with playback
* Program Play, Folder Play, Shuffle Play, Interval Play modes, etc...
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.