DENON D-F109C Mini Hi-Fi Separate Appliance System

The ancestor of the system F109 was timeless recognition for its excellent sonic performance and high quality finish of each individual device, the aluminum front panel reflect the internal quality.

This classic system consists of Stereo Receiver and CD-Player cooperating fully digitally. Any conversion of the digital signal is not required, since the output stages are also digital and the signal source can be maintained as much as possible "intact“. Everything can be controlled with the new remote control. The SC-F109 Speaker System is an ideal addition to the main devices, providing resources but detailed sound.

Stereo Receiver DRA-F109

    Simple and clean design circuits
    65 W x 2 (4 ohms) high power output
    FM tuner
    Omoaxonikopsifiakes inputs for the DNP-F109 and DCD-F10
    Optikopsifiaki input for system expansion (TV d other digital devices)
    Front two-line display for easy recognition of transmitting stations
    Easy alarm settings
    New remote control design
    The Denon Remote Connection for Control through applications combined with DNP-F109



CD-Player DCD-F109

    Playing CD-R / CD-RW (MP3, WMA)
    Clean and clear sound
    Minimum signal paths
    Minimum pickup signal path CD
    Connectivity portable player
    Direct iPod connection via USB
    Connectivity USB storage media
    Front two-line display for easy recognition tracks


Speaker System SC-F109

    Woofer 12 cm D.D.L. cone
    High definition tweeter 2.5 cm to vent
    Crossover, to separate woofer and tweeter to reproduce the smoothness of natural sound
    Anti-vibrational rod for optimum acoustics inside the cabinet
    Designed by the European sound standards and cooperation Denon

For the full cinema-like experience, the ultimate T Series system has the best of everything: T301s all round, supported by the same discreet high performance subwoofer. However big your living area, it envelopes you in an expansive, richly textured sound picture that brings a movie to life as youʼve never experienced before.

    T301 / T301c
Design     Two and a half-way closed box
Drive units     2 x 115mm (4.5in.) dual layer MF
25mm (1in.) aluminium HF
Frequency response     80Hz - 30kHz
Crossover frequency     1.7kHz
Amplifier requirements     10 - 150 W
Sensitivity (2.83V/1m)     91dB (wall mount)
88dB (floor stand mount)
Maximum output (SPL)     110dB
Impedance     8Ω
Internal volume     1.4 Litres
Weight     1.5kg (3.3lbs)
Dimensions
(H x W x D)     600* x 140 x 35 mm
(23.6 x 5.5 x 1.4 in.)
Dimensions
(H x W x D)
centre mode     140 x 600 x 35 mm
(5.5 x 23.6 x 1.4 in.)
Finish     Black
* Height of satellites will increase by 30mm when using supplied desk stand
Not all models / finishes are available in all markets. Contact your local dealer for specific range details.


      T-2
Design     Closed box powered subwoofer
Drive units     1 x 250mm (10in.)
Frequency response     30Hz - 250Hz
Amplifier     250 Watts built-in Class-D
Maximum output (SPL)     110dB
Low pass filter variable     Fixed 250Hz, 2nd-order
Low level signal inputs     RCA phono socket
Internal volume     12.7 Litres
Power requirements     100 - 240 V ac ~ 50/60Hz
Power consumption     250VA
Weight     13kg (28.6lbs)
Dimensions
(H x W x D)     380 x 370 x 177 mm
(15.0 x 14.6 x 7.0 in.)
Finish     Black
Not all models / finishes are available in all markets.
Contact your local dealer for specific range details.

Driver Complements
Satellites
Mid/Woofer     1 - 3 1/4" Diameter (8.26cm)
Dynamic Balance aerated polypropylene cone with Extended Linear Motion voice coil driver
Tweeter     1 - 3/4" Diameter (1.91cm)
Dynamic Balance ring radiator tweeter
Center
Tweeter     1 - 3/4" Diameter (1.91cm)
Dynamic Balance composite ring radiator tweeter
Electrical
Overall Frequency
Response     85HZ - 31kHz
Lower -3dB Limit     110Hz
Upper -3dB Limit     28kHz
Nominal Impedance     8 ohms
Recommended Amplifier Power     10-125 w/channel
Efficiency     90 dB
Inputs     Gold-plated 5-way binding posts
Dimensions
Satellites
Cabinet Size     7 3/4" H x 4 1/2" W x 5 15/16" D
(19.68cm H x 11.43cm W x 15.08cm D)
Mounting Options     Included wall mount bracket; 1/4x20 threated insert
Enclosure Type     Steel-plate reinforced curved enclosure with PowerPort bass venting
Center
Cabinet Size     4 5/16" H x 16 11/16" W x 3 15/16" D
(10.95cm H x 42.39cm W x 10.00cm D)
Weight     4.70 lbs. (2.13kgs)
Mounting Options     keyhole slots; .25 x 20 threaded inserts
Enclosure Type     Steel-plate reinforced curved enclosure with PowerPort Bass venting
Shipping/Other
Total Shipping Weight     20.30 lbs. (9.21kgs)
Speaker Warranty     5 years parts and labor (original purchaser)
Accessories
(comes with)    Satellite wall mount bracket

The SR-8040HD is built to the same high performance standards as Definitiveʼs main left and right front speakers and includes features like high-definition second generation patented BDSS bass/midrange drivers with butyl rubber surrounds, wide-dispersion pure aluminum dome tweeters, complex crossover networks and rock-solid cabinet construction. It can be mounted to a wall with the integrated keyhole plate or it can be placed atop a shelf or after-market stand. However you use the SR-8040BP youʼll enjoy superior surround sound realism.

The Bipolar Advantage
Definitiveʼs SR-8040HD is a bipolar system containing two complete full-range speaker systems, one on each side of the cabinet. Bipolar radiation spreads the surround signals evenly throughout your room for a more enveloping sense of you-are-there realism than could be achieved with conventional forward-firing speakers.

The SR-8040HD is a full-range, extremely linear, low-distortion system which is timbre-matched to blend perfectly with all Definitive BP series speakers as well as other high-quality speaker systems. The SR-8040HD wide dynamic range, high-definition sound quality and its bipolar radiation pattern results in total immersion in the musical event or movie soundstage.

Bipolar Surrounds are Easy to Use
Definitive's bipolar surrounds are designed for easy and unobtrusive placement in your room. Easy-to-use mounting plates are included for wall mounting. Definitive's BP surround speakers may be located on the sides or rear of the room (or both as in 6.1 and 7.1 channel installations) with excellent results.

Patented Technology Delivers High Definition and Wide Dispersion
Dispersing the surround channel sound evenly over a broad area of the room is vital for creating the enveloping youʼre-in-the-action experience movie directors intend for you to experience. Weʼve engineered the SR models with our latest generation ultra-high definition midrange drivers that set new standards for wide dispersion and clean, accurate reproduction.

The drivers used in the SR-8040BP are 3-1/2" second generation BDSS drivers. BDSS is Definitiveʼs patented Balanced Double Surround System technology that supports the speaker cone at both the inner and outer edges allowing longer, more linear excursion for greater clarity and finely textured inner detail. A new patent pending Linear Response Waveguide™ smoothes off-axis frequency response and disperses sound over a wider area for crystal clear intelligibility and life-like envelopment for every listener in the room. The tweeters are pure aluminum domes, which has been heat-treated to relax the crystal structure and then coated with a ceramic to produce extended highs that reveal nuance and shimmer without a trace of edginess.

The Proof is in the Listening
Now that youʼre thoroughly impressed with the technology and passion weʼve poured into the SR-8040BP it is time to find a stocking dealer near you to audition this remarkable achievement of art and science.

Dimensions :9-1/2" H x 7-13/16" W x 5-3/8" D | 24cm H x 19.8cm W x 13.5cm D
Driver complement :2 each 3-1/2" BDSS drivers, 2 each 1" aluminum dome tweeters
Frequency response :50Hz - 30kHz
Sensitivity :92dB
Nominal impedance :8 Ohms
Recommended amplifier power :20 - 150 WPC
Inputs :One pair of 5 way binding posts
Weight :8 lbs. | 3.6kg
 

Driver Complement
Mid/Woofer     1 - 6-1/2" Diameter (16.51cm)
Dynamic Balance driver with Super Cell Aerated Polypropylene cone
Midrange     1 - 3-1/4" Diameter (8.26cm)
Dynamic Balance driver with Super Cell Aerated Polypropylene cone
Tweeter     1 - 1" Diameter (2.54cm)
Dynamic Balance Enhanced Ring Radiator tweeter
Electrical
Overall Frequency Response     45Hz-40kHz
Lower -3dB Limit     55Hz
Upper -3dB Limit     30kHZ
Nominal Impedance     Compatible with 8 Ohm outputs ohms
Recommended Amplifier Power     20-200 w/channel
Efficiency     83 dB
Crossover     Orth Crossover design
Crossover
(mid-high array)     2400Hz
Inputs     Dual Gold-Plated Binding Posts
Dimensions
Cabinet Size     16-1/4" H x 19-23/25" W x 6-3/4" D
(41.27cm H x 50.60cm W x 17.14cm D)
Mounting Options     keyhole slots for wall mounting; pedestal for shelf mounting
Enclosure Type     Sealed
Enclosure Type
(subwoofer)     PowerPort Bass venting
Shipping/Other      
Product Weight     28.90 lbs. (13.11kgs)
Shipping unit:     pair
Total Shipping Weight     62.10 lbs. (28.17kgs)
Speaker Warranty     5 years parts and labor (original purchaser)

imensions | Metric :40" W x 4-1/4" D x 4-1/4" H: speaker only, not including bracket | 101.6 x 10.5 x 10.5 cm
Driver Complement :Three 3-1/4" BDSS drivers with Axially Aligned 3/4" pure aluminum dome tweeters; Two 3-1/4" BDSS High-output full-range drivers; Four 3" full-range high-output surround drivers
Frequency Response :60 Hz – 30 kHz
Impedance :Compatible with 8 Ohms outputs
Sensitivity :89dB
Recommended Associated Amplifier Power :20 – 175 watts
A/V Receiver Crossover Setting :140 Hz
Inputs :Five pairs of 5 way binding posts
Mounting Options :Horizontally: wall or shelf mounting with included bracket and leveler foot
Available Finishes :Gloss Black
Warranty :5 Years
Weight | Metric :20 lbs | 9.1 kg
Enclosure :Aircraft grade extruded aluminum