Content |
The DN-F350 audio media player utilizes Bluetooth, SD/SDHC, USB and 3.5mm inputs for playing digital audio from solid-state media and personal devices. The space-saving 1RU design is perfect for commercial installations, fitness studios, bars and restaurants. Pitch and tempo control with a range of +/- 15% can be activated for dance and fitness applications. In addition, a front-mounted XLR combo jack with gain control accommodates a microphone or line level source for added versatility. Phantom power (48VDC) is available for condenser microphones, while balanced and unbalanced outputs are provided for contractor-friendly installations.
- Plays content from SD/SDHC, USB/HDD, 3.5mm and Bluetooth
- Mic/Line XLR front panel combo jack input with gain control and 48VDC phantom power
- Pair up to (8) Bluetooth devices for playback
- Balanced XLR and unbalanced RCA outputs
- Control via front panel or included IR remote
- Pitch and tempo control +/- 15%
-
Audio Specification
- Frequency Response: 20 Hz – 20 kHz (+/- 1.0dB)
- Dynamic Range: > 85 dB
- Signal-to-Noise Ratio: > 90 dB (A-weighted)
- Variable Pitch/Tempo Control: ±15%
-
Audio File Formats Supported
- WAV (44.1k, 16bit)
- MP3 (44.1k, from 64 to 320 kbit/s)
- FLAC
- MP2
- M4A (without DRM protection)
- WMA (without DRM protection)
- AIFF
-
Bluetooth Specification
- Version: v4.0 / v2.1 + EDR
- Profile: A2DP, AVRCP, HFP, HSP, SPP, OPP
- Range: Up to 50m
- Maximum Transmission Power: Class 2, 4 dBm
- Frequency: 2400 – 2500 MHz
-
Connectors
- (2) Balanced XLR outputs
- (1) Unbalanced RCA stereo output pair
- (1) Balanced XLR-1/4 input
- (1) 1/8” Aux (3.5 mm) input
- (2) USB ports
- (1) 1/4" Headphone output
- (1) IEC power input
-
General
- Input Voltage: 100–240 V, 50/60 Hz
- Fuse: 1A
- Consumption: 17 W
- Dimensions (WDH): 16.9 x 7.9 x 1.7” (430 x 200 x 43.6mm)
- Weight: 5 lbs. (2.3kg)
|
The CMP30 is a All-in-one audio source device which accommodates three different kinds of audio sources into one single device. it combines a CD-Player, MP3 player and AM/FM tuner into one single rack space 19・E housing. On the front a CD slot, a USB slot and a SD/MMC memory card slot are provided. This makes it possible to play regular audio CDs as well as MP3 files from either CDs, USB memory sticks or SD/MMC memory cards. There are two separate stereo outputs provided on the rear side, one for the CD & MP3 player while the other one is used for the AM/FM tuner. Because of these two separate stereo outputs, these two devices can operate simultaneously. This feature can be useful for Multi-Zone systems where multiple audio input devices are required. An rs232 control port makes the operation possible from external control devices such as home automation systems from AMX and crestron. - Model name: AUCMP30
- Control: RS232
- Mounting: 19"
- Unit Height: 1U
- Power Supply: 240 V AC / 50 - 60 Hz
- Dimensions (W x H x D): 483 x 44 x 380 mm
|
Slot-loading mechanism
RCA unbalanced output
XLR balanced output
Optical and Coaxial S/PDIF digital outputs
XLR AES/EBU output
All, single, random, A/B and 99-track program play
Incremental play
Track elapsed, track remain, disc remain time display
Call function: return to last play start point
Intro check
Fade in/out (0 to 10 sec., in 0.5 sec. steps)
Power on play
Frame-accurate search
Skip back play
Activate or deactivate the wireless remote
Relay play with multiple units through 1/8” relay in/out jack
Index search (CD-DA discs) and directory search (MP3 discs)
Mono output
Resume
Fader start / event start
EOM (End of message)
WAV file (up to 48kHz/16bit) and MP3 file (up to 320kbps VBR) playback
Headphone output
RS-232C and Parallel control
Wireless remote controller included
Footswitch input (for optional RC-3F footswitch)
| The CD-400UDAB is a compact-sized, rack-mountable and remote-controllable media player that can play tracks from CDs, USB memory devices, SD cards and Bluetooth devices. It also includes an FM/DAB+ tuner with 20 presets to play music from radio stations and a front-panel mini-jack input to connect devices such as portable music players. The tuner has its own output enabling the user to supply two rooms with different music signals, for example.
Remote control is possible by the included wireless RC-CD400 and by serial control via the built-in RS-232C port. This all-in-one CD player is suitable for a wide range of applications, from background music in touring, restaurants or small stores to use in public facilities.
Features at a glance
- Ultra-compact, rack-mountable media player with DAB+/FM tuner and Bluetooth receiver
- Multiple playback sources:
- Audio CD playback
- MP3 and WMA file playback from CD
- Audio file playback from SD and USB memory (MP3, AAC, WAV, WMA)
- DAB+/FM radio playback (can be output from the main or separate output connectors)
- Playback via Bluetooth connection with a smartphone or computer
- Playback from other audio sources via AUX IN connector
- CD standards supported: CD-DA, CD-ROM, CD-R, CD-RW (CD-DA format only)
- Slot-loading CD drive mechanism
- Numeric keys for direct track selection
- Playback modes include Continuous, Single, Random
- Repeat playback (All, Single, A–B)
- Incremental play (skip to each next track by pressing the PLAY button; available for CD, USB, SD)
- Resume function (start playback from the track where the unit was last stopped)
- Folder playback with SD and USB memory
- Dubbing from CD or tuner to SD or USB memory (MP3 format)
- Time display (track elapsed / track remain / total elapsed / total remain)
- Power-on play (timer function)
- Lock function to avoid accidental operation
- Anti-shock memory
- XLR balanced analogue output (main)
- RCA unbalanced analogue output (main)
- RCA unbalanced analogue output (tuner)
- Remote control via RS-232C serial connector (D-sub 9-pin)
- Optional Ethernet interface card (IF-100E) available for external control over a network (Telnet protocol)
- Headphones output with dedicated volume control
- Backlit LC display
- Wireless remote control included
- Included accessory: Removable mains power cable, RC-CD400 wireless remote control, rack-mounting screw kit, FM antenna, owner’s manual with warranty
Specifications
General |
Supported media |
|
|
USB memory |
|
512 MB – 64 GB |
SD card |
|
512 MB – 2 GB |
SDHC card |
|
4–32 GB |
CD |
|
CD-DA, CD-ROM, CD-R, CD-RW (CD-DA format only) |
Supported file systems |
|
FAT16, FAT32 |
Supported file formats |
|
|
CD-DA |
|
44.1 kHz, 16 bit |
MP3 |
|
44.1 / 48 kHz, 32–320 kbit/s and VBR (MPEG1/2 Audio Layer 3) |
WAV (USB/SD only) |
|
44.1/48 kHz, 16 bit |
WMA |
|
44.1/48 kHz, 32–320 kbit/s and VBR (WMA v9 standard, DRM not supported) |
AAC (USB/SD only) |
|
44.1/48 kHz, 8–320 kbit/s and VBR (MPEG4 AAC-LC audio stream) |
Number of audio channels |
|
2 channels (stereo), 1 channel (mono) |
Recording file format |
|
MP3 (44.1 kHz, 96/128/192/320 kbit/s) |
Bluetooth receiver |
Bluetooth version |
|
v4.2 |
Output class |
|
Class 2 |
Supported profiles |
|
A2DP, AVRCP |
Supported A2DP codecs |
|
SBC, AAC, aptX |
Supported A2DP content protection |
|
SCMS-T |
Tuner |
Frequency range |
|
FM: 87.5–108 MHz
DAB: Band III, 174–240 MHz |
Antenna connector |
|
F-type (female), 50 Ω, unbalanced |
Analogue audio inputs and outputs |
AUX analogue audio input (unbalanced) |
|
3.5-mm TRS mini-jack |
Nominal input level |
|
–20 dBV (0.1 Vrms) |
Maximum input level |
|
–4 dBV (0.63 Vrms) |
Input impedance |
|
≥10 kΩ |
Main analogue audio outputs (balanced) |
|
XLR-3-32 (1: GND, 2: HOT, 3: COLD) |
Nominal output level |
|
+4 dBu (1.23 Vrms, Output Attenuation: 0 dB) |
Maximum output level |
|
+20 dBu (7.75 Vrms, Output Attenuation: 0 dB) |
Output impedance |
|
100 Ω |
Main analogue audio outputs (unbalanced) |
|
RCA |
Nominal output level |
|
–10 dBV (0.316 Vrms, Output Attenuation: 0 dB) |
Maximum output level |
|
+6 dBV (2.0 Vrms, Output Attenuation: 0 dB) |
Output impedance |
|
200 Ω |
Tuner analogue audio outputs (unbalanced) |
|
RCA |
Nominal output level |
|
–10 dBV (0.316 Vrms, Output Attenuation: 0 dB) |
Maximum output level |
|
+6 dBV (2.0 Vrms, Output Attenuation: 0 dB) |
Output impedance |
|
200 Ω |
Headphones output |
|
6.3 mm stereo jack |
Maximum output power |
|
≥20 mW + 20 mW (THD+N ≤0.1 %, 32 Ω load) |
Control I/O |
RS-232C |
|
D-sub 9 pin |
Audio performance |
Frequency response |
|
20 Hz – 20 kHz, ±1 dB (Fs: 44.1 kHz, 48 kHz, JEITA) |
Total harmonic distortion |
|
≤0.005 % (JEITA) |
S/N ratio |
|
≥95 dB (JEITA) |
Dynamic range |
|
≥90 dB (JEITA) |
Channel crosstalk |
|
≥90 dB (JEITA) |
Power supply and other specifications |
Mains power |
|
AC 100–240 V, 50/60 Hz |
Power consumption |
|
20 W |
Overall dimensions (W × H × D) |
|
483 mm × 47 mm × 296 mm |
Weight |
|
3.3 kg |
Operating temperature range |
|
5–35 °C |
Included accessories |
|
Removable mains power cord, wireless remote control (RC-CD400), rack-mounting screw kit, FM antenna, owner’s manual/warranty |
Optional accessory |
|
IF-E100 Ethernet option card, allows the unit to be controlled over a network (Telnet protocol) |
Design and specifications subject to change without notice. | The Apart PCR3000RMKII is a professional multisource CD/USB/SD-card music player with integrated FM RDS and DAB+ tuner, equipped with multiple independent analog outputs, coaxial and optical digital output for the CD/USB/SD player and a RS232-port for use in integrated systems.
The maximum analog output level can be preset at the back to match the output level of other audio sources. Additionally there is a combi output available. This output will play the music from the CD/USB/SD player by default. When there is no media playing from the CD/USB/SD player, the output will automatically switch to the tuner (FM or DAB+) output after a few seconds, provided that the tuner is not in standby mode. |
Introducing the Denon DN-C640, a fully specified Network Audio/CD player for use in all broadcast, installation and professional audio environments. The DN-C640 is a 1U rack-mount unit featuring a slot-load CD/DVD drive, able to read CDA, MP3, WMA, MP2 and PCM .wav files from CD or DVD media. It is also equipped with an inbuilt LAN port offering complete access to network audio files and remote control via a web based GUI.
With balanced, unbalanced, SP-DIF and AES outputs, an RS 232 port, an IR receiver and a parallel remote port, the DN-C640 fits into any and all pro audio environments requiring the playing of CD and the versatility of network audio selection, locally or remotely. Additionally the use of DVD media and compressed audio files can result in days of playback accommodating the most demanding of users.
The product is completed with a high visibility, fully featured fluorescent display and large backlit transport controls.
- Supports CD-DA (.cda), WAVE (.wav), MPEG-1/2 Layer III (.mp3), MPEG-1
- Layer II (.mpg), Windows Media Audio (.wma)
- End Monitor and User-selectable Finish Mode Features
- Cue to Music (with dedicated button)
- Reads CD-R/RW, DVD-R/RW, and DVD+R/RW discs
|
Reviews
There are no reviews yet.