DUNLOP MXR DC Brick M237

Keep your pedals powered all night long with the MXR DC Brick, a revamp of the DCB10. Now under the MXR brand, the new DC Brick features all of the short circuit and overload protection of the original but now handles twice the power, allowing you to use virtually any combination of effects. Additionally, each 9v output has a red LED that illuminates if there is a short so you can quickly identify and troubleshoot any power problems. The MXR DC Brick has eight 9v outputs and two 18v outputs, a change from the DCB10ʼs seven 9v outputs and three 18v outputs. And of course, the AC adapter and all necessary cables to connect pedals to the unit are included.

Product Features:

• 1.7 A current capacity can power more than 20 effects pedals, keyboards and other DC 9 V gear*
• Supplied with a full complement of connectors and jumper cords for total compatibility
• Includes 4 assorted jumper cables and 2 daisy-chain cables each with 5 connectors
• Takes up only one outlet space and frees up more room for your pedals
• Runs on any AC power supply from 100 - 240 V; worldwide usability without transformer
• Transformerless design eliminates 50/60-cycle hum and extraneous noise
• High-quality components and exceptionally rugged construction ensure long life

• Fully regulated universal pedalboard power supply
• 4 standard centre negative outputs with 1,000 mA output total
• Short circuit and overload protection for each outlet
• DC cables and mains adapter included

The PWT12 is universal pedal board power supply with 12 outputs electrically isolated in pairs. Outputs 1 - 8 provide 9 V DC each with a maximum current draw of 250 mA per pair. Outputs 7 and 8 additionally feature a polarity switch to change the center pin from negative to positive (and the barrel to negative).

Outputs 9/10 provide 18 V DC each with a maximum current draw of 125 mA. Additionally, the upper output is switchable to 12 V DC. Providing 9 V DC/250 mA, outputs 11/12 are also switchable to 12 V AC. The green indicator LEDs turn red when alternative ouput voltages are selected.

All output pairs are individually protected against shorts and overload. When a fuse trips the LED indicator of the corresponding pair goes out. After the fault condition has been removed the fuse is automatically reset, and within a few seconds the output resumes operation indicated by the illuminated LED.

The toroidal transformer and the steel housing of the PWT12 provide smooth FX operation free of interference and hum pickup. Mains power input is switchable between 115 V and 230 V.

The PWT12 features two brackets for easy pedal board mounting while a cover plate protects the DC plugs. The DC cables can be fixed to the plate with cable ties for strain relief. The PWT12 comes with a set of 12 long DC cables.

• Universal power supply for effect pedals
• 12 outputs on barrel-style DC connectors with 2.1 mm center pin
• regulated DC output, all outputs electrically isolated in pairs
• Outputs 1/2, 3/4, 5/6: 9 VDC each, 250 mA per pair, center pin negative, green LED indicators
• Outputs 7/8: 9 VDC, 250 mA/pair, switchable polarity, two-color LED, green = center pin negative, red = center pin positive
• Outputs 9/10: 2x 18VDC (LED = green), switchable to 1x 12VDC / 1x 18VDC (LED = red), maximum current 125mA/pair, center pin negative
• Short circuit protection per pair with automatic reset
• 115 V / 230 V switchable
• Mains fuse: 5 x 20 mm fine wire, 115 V = T 500 mA;  230 V = T 250 mA
• Toroidal transformer, 20 VA continuous

The Korg KA189 Power Supply is a power supply, for microKORG, Electribe A,R,S, microKONTROL, padKONTROL, SDD-3000 PEDAL, AX1500G, AX3000G/B, D3, VOX Dynamic Looper, VOX-JS, Cooltron, with 9V voltage, and 1100mA output current.

The main features of the Korg KA189 Power Supply include:

• Suitable for: microKORG, Electribe A,R,S, microKONTROL, padKONTROL, SDD-3000 PEDAL, AX1500G, AX3000G/B, D3, VOX Dynamic Looper, VOX-JS, Cooltron
• Voltage: DC
• Output Current: 1100 mA
• Output Voltage: 9V

 4,5 Volts Power Supply for KORG PX4 and PX4R.