| Content |
Based on John Petrucciʼs Cry Baby Rack Wah settings, ultimate tonal control of wah effect, volume, Q, and six EQ controls
The JP95 John Petrucci Signature Cry Baby® Wah is the result of the legendary prog metal shredderʼs years-long quest to hone his perfect wah tone. For years, John used the Cry Baby Rack Wah system to tweak and fine-tune its numerous parameters until he found the sound that perfectly represents all the expression and intensity he needs. Recently, he and Dream Theater engineer Richard Chycki worked with the Cry Baby design team to replicate and further fine-tune that sound with a single pedal. This is a wah that, as John puts it, "sounds huge and badass like an angry, screaming monster with the ultimate expressive range—itʽs perfect for shaping single notes or manipulating growling, heavy chords.”
Factory set to Johnʼs personal settings, the JP95 features all the controls he used to find his Cry Baby voice: Volume to add gain, Q to shape the width of the effect, and a 6-band EQ to shape the tone of the wah sound, from 100Hz to 3.2KHz. Want to fine-tune the sound to your own preference? Just take off the bottom plate and tweak away.
The John Petrucci Signature Cry Baby Wah comes in a sturdy, road-ready housing with custom smoked chrome finish and JP shield logo tread.
|
VINTAGE TUBE OVERDRIVE TO800
What's bright green and goes from 1 to 11 as fast as you can step on the “On” switch? It’s the very essence of rock ‘n’ roll, our screaming-hot VINTAGE TUBE OVERDRIVE TO800 effects pedal! The classic sound of blazing, overdriven vacuum tubes never goes out of style, and they’re at your command – when you have the VINTAGE TUBE OVERDRIVE TO800 in your effects chain
Vintage Tube-Like Tone
In order to recreate the sound of real-tube crunch, we put the original 4558 op amps and legendary MA150 distortion diodes in the TO800, putting rock’s most powerful overdrive sounds at your disposal. The resulting output is extremely faithful to that of the vintage tone machines that made rock and roll history.
Ease of Use
Dedicated Drive, Tone and Level controls let you shape the exact sound you want. The status LED tells you when this pedal is activated, and the top-quality on/off switch provides the highest signal integrity in bypass mode. You can power the TO800 via a 9 V battery or our PSU-SB DC power supply (not included).
- Get vintage overdrive, smooth sustain and screaming fat tone
- Perfect for guitar; great for bass and keyboards, too
- Uses original 4558 IC plus MA150 distortion diodes for authentic vintage sound
- Captures every nuance of your playing from smooth overdrive to screaming tube sounds
- Dedicated Drive, Tone and Level controls for awesome sound shaping
- Status LED for effect on/off and battery check
- Runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included)
- Rugged electronic On/Off switch for noise-free operation
| Building on the 20-year legacy of the famous BOSS BF-2, the new BF-3 flanger pedal gives guitarists and bassists an updated version of the classic BOSS flanger with the thickest stereo flanging sounds ever. Two new modes (Ultra and Gate/Pan) create stereo flanging with incredible depth--even Slicer-type effects and sounds that seem to "swirl" around the listener. An instant classic.
- BOSS' best flanging effects in a compact pedal
- New Ultra and Gate/Pan modes for ultra-fat flanging and futuristic slicer-type sounds, respectively
- Momentary mode turns flanging on instantly
- Tap tempo adjustable via pedal
- Independent Guitar and Bass inputs and stereo outputs
- BOSS 5-year warranty
| The Marshall EH-1 ECHOHEAD Guitar Effect Pedal, Echo/Delay. Add dense rhythmic textures to your sound.
The Marshall EH-1 ECHOHEAD recreates six different delay effects for you to explore, from crystal-clear echoes to hypnotic reverse delays via the vintage whir of a retro tape machine. Create pulsing tones from your guitar rig and add dense rhythmic textures to your sound. The EH-1 Echohead features a maximum delay time of 2000ms, stereo outputs and a tap tempo delay imput. The EH1 Echohead dual outputs offer the choice of using a passive bypass for the main signal path to ensure complete tonal integrity or to allow your pedal to spill over, permitting your echo to naturally die away.
The main features of the Marshall EH-1 ECHOHEAD include:
- 6 different, high quality delay effects for you to explore
- Multi-mode selector switch
- Delay time control
- Feedback control
- Level control
- Solid metal casing
- Passive bypass
- Tap tempo pedal input
- Power: 9V DC Centre Negative Regulated PSU or PP3 battery
- Minimum Current Draw: 80mA
- Switches: On/Off Switch
- Indicators: On/Off LED
- Jacks: 2 Input, 2 Output 'Jack sockets' (1/4 inch)
- Input Impedance: 1MOhm
- Output Load Impedance: less than 1kOhm
- Dimensions: 120mm x 65mm x 55mm
- Weight: 510 grammes
|
Vintage BOSS phasing effects including 4-, 8-, 10-, and 12-stage phasers, plus new "Rise" and "Fall" effects for unidirectional phasing. Tap tempo sync or realtime control of rate via an Expression/Pedal input.
| Nominal Input Level | -20 dBu |
|---|
| Input Impedance | 1 M ohms |
|---|
| Nominal Output Level | -20 dBu |
|---|
| Output Impedance | 1 k ohms |
|---|
| Recommended Load Impedance | 10 k ohms or greater |
|---|
| Residual Noise Level | -92 dBu (IHF-A, Typ.) |
|---|
| Connectors | INPUT Jack, OUTPUT Jack, EXP/CTL Jack, AC Adaptor Jack (DC 9 V) |
|---|
| Power Supply | DC 9 V: Dry Battery 9 V type (6F22/9 V), AC Adaptor |
|---|
| Current Draw | 50 mA (DC 9 V) |
|---|
| Accessories | Dry Battery 9 V type (6F22/9 V) |
|---|
| Options | AC Adaptor (PSA-Series), Expression Pedal (Roland EV-5), Footswitch (FS-5U) |
|---|
| Size and Weight ( incl. battery ) |
|---|
| Width | |
|---|
| Depth | |
|---|
| Height | |
|---|
| Weight | |
|---|
|
The Digitech XHP HYPER PHASE Guitar Effect Stomp Box Pedal. Dial in the exact phaser or flanger sound you want from a selection of awesome voicing sounds.
The Digitech XHP Hyper Phase delivers 7 operational modes, instead of the typical one mode only that you find in some other pedals. These operational modes are easily selectable using the mode control allowing you to choose from a selection of awesome voicing sounds, triggering feature, and useful step functions. Now you are no longer limited to a one-trick pedal. You can dial in the exact phaser or flanger sound you want! The Hyper Phase has Speed, Depth, Regen, and Mode controls. Outputs for both pedals include Out 1 (Mono) and Out 2 for stereo operation.
The main features of the Digitech XHP HYPER PHASE include:
- Dial in the exact phaser or flanger sound you want from a selection of awesome voicing sounds
- 7 Different phase types
- Speed, Depth, Regen, and Mode controls
- Triggering and step capability
- Stereo outputs with switchable CIT Cabinet Modeling
|
Reviews
There are no reviews yet.