Content | The LM10-2 is a 2-way loudspeaker system with high power handling capacity that has been designed to be used as stand-alone full range system, together with a passive sub woofer (e. g. LM12-1) or as Mid/Hi component in active multi-way setups. (recommended active crossover frequency: 100 - 150 Hz). Through its half-sided trapezoidal shaped enclosure the LM10-2 is also suitable as monitor speaker system, especially for keyboard applications. The Lo-Mid range between 80 Hz and 7 kHz is reproduced by a Dynacord 10" woofer 357793. Hi range frequencies above 7 kHz are transmitted via an Electro-Voice DH2010A/HPT94 Constant Directivity Horn system. Thermal breakers and halogen protectors prevent that the loudspeaker components are damaged by critical output levels and short-term thermal overload. The cabinet of the LM10-2 is made of 16 mm Mediapan. All connections of enclosure parts as well as the internal bracing are slotted and glued together. The cabinet’s surface is coated with hard-wearing matt black structure lacquer. Front-protection for the loudspeaker systems is gained through an extremely stable, powder-coated metal grille. The terminal board of the LM10-2 provides two Speakon female-type connectors which ensure a secure connection and trouble-free carrying the signal through. A recessed handle on the side guarantees easy and safe transportation. Four heavily dimensioned rubber foot stands, the pole-mount sleevejoint that is recessed in the bottom side as well as the cabinet’s half-sided trapezoidal shape allow a wide variety of different combinations in the loudspeaker setup.
Nominal impedance 8 ohms Rated power capacity RMS 200 W Program power capacity : 400 W SPL 1W/1m 97 dB Max. SPL 1m 123 dB Frequency range ( -10 dB ) 80 Hz - 20kHz Crossover frequency 7 kHz Components Lo 10" Dynacord (357 793) Components Hi Electro-Voice DH 2010A (353 078), HPT 94 Horn (344 511) Connections 2 x Speakon connectors Cabinet style 16 mm mediapan plate, 1 handle, 4 rubber feet Outfit Cabinet surface black varnished, Powder-coated steel grille Dimensions ( WxHxD ) 297 x 457 x 280mm Weight 14kg |
The CS3.1 Cuban Speaker features a 3 1/8" full range loudspeaker with a shielded neodymium magnet. The CS3.2 Cuban Speaker features a 1" soft dome tweeter and a 3 1/8" full range loudspeaker with a shielded neodymium magnet. They are capable of producing up to 20 W RMS, with a maximum of 40 W. The standard speaker impedance is 8 Ohm, but through an additional 100 V Line transformer, it also can be used on 100 V PA systems.
- Model Name / Type: AUCS3.2 / cuban speaker
- Max . Power: 40 W
- RMS Power: 20 W
- Sensitivity (1 W / 1 m): 86 dB
- Max. SPL: 102 dB
- Impedance: 8 ohms
- Frequency Response (±3 dB): 180 Hz - 20 kHz
- Dimensions (W x H x D): 192 x 122 x 106 mm
| Premium in-wall speaker designed for applications where top performance is required. The high performance 6-1/2 inch woofer features a polymer-coated aluminum cone with pure butyl rubber surround. The 1" pure titanium dome tweeter is mounted on a low-diffraction swivel-mounting system enabling the user to direct high frequencies where required without the diffraction distortion inherent in other multidirectional tweeter designs.
Features:
- Frequency Response: 38 Hz - 20 kHz
- 100W continuous program (50W cont. pink, 200W cont.peak)
- 88 dB sensitivity (1W/1m)
- High-slope crossover network produces natural sound and even coverage.
- Optional MTC-126RIF Rough-In-Frame for new construction installation to wallstuds.
|
- Compact high-performance stage monitor with top-of-the-range technologies
- Class-D power amplifier with 300 W RMS/1200 W peak and 121 dB max. SPL
- Coaxial design for true point source with a 1.75" titanium-diaphragm HF driver
- 8" woofer with 2.5" voice coil
- Optimised, practical radiation pattern due to 50° x 90° CD horn
- DynX® DSP (Gen.2) for distortion-free sound even at maximum volume
- 3-band EQ, Notch filter, 4 application presets and delay function
- PowerCON compatible loop-through professional power connection
- 35 mm speaker stand flange for FOH applications
- Durable Polyurea coating and heavy-duty front grille
General
Product type
Stage monitors
System output (RMS)
300 W
System output (Peak)
1200 W
Max. SPL Average (Sine burst)
116 dB ( 100Hz - 12 kHz, fullspace @1m, 10% THD )
Max. SPL Peak (Sine burst)
121 dB ( fullspace @1m, 10% THD )
Frequency response (-3 dB)
68 Hz - 18000 Hz
Frequency response (-10 dB)
59 Hz - 20000 Hz
Crossover frequency
2500 Hz
Dispersion (H x V)
50° x 90°
Features
3-band EQ (High, Mid, Low), 4 Application presets, Delay line, Notch filter
Low/mid woofer
Low/mid Woofer dimensions
8 "
Woofer dimensions (mm)
203.2 mm
Woofer type
Coaxial loudspeaker
Woofer voice coil (mm)
65 mm
Cabinet construction
Bass Reflex
Cabinet material
15 mm Birch Plywood, 15 mm MDF
HF
Tweeter dimensions (mm)
25.4 mm
Tweeter brand
Custom-made
Tweeter voice coil
1.75 "
Tweeter voice coil (mm)
44.45 mm
Amplifier module (integrated)
Protection circuits
Multiband limiter, over voltage, over-current, thermal overload
Operating Temperature
0 - 40 °C
Humidity Range
< 80 % ( non-condensing )
Controls
On / off switch, Rotary/push encoder
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Power in / out
PowerCON compatible
Line input connectors
6.3 mm jack, XLR - combo
Line through connector
XLR
| MQ 50i is a 2 way compact loudspeaker for indoor wall flush-mounting installation.
Its "bass-reflex” (/ vented) cabinet includes a 5” woofer and a waveguideloaded dome tweeter (to ensure a sound correct dispersion over a wide coverage angle).
It includes a transformer inside for the connection to (100 – 70 V) constant voltage lines, yet it can also be set to 16 Ω (low impedance connection).
The power / mode selection is made by means of the front panel rotary switch.
Acoustical Specifications |
Type Of Speaker: |
2 way in wall bass reflex |
|
Frequency Response: |
180 Hz |
÷ 20 kHz |
Max SPL @ 1m: |
112 dB |
|
Horizontal coverage angle: |
120° |
|
Vertical coverage angle: |
100° |
|
Power Handling: |
60 Watt RMS |
|
Peak Power Handling: |
120 Watt PEAK |
|
System Sensitivity: |
90 dB |
|
Impedance: |
16 Ω |
|
Crossover frequencies: |
3000 Hz |
|
TRANSDUCERS |
Speaker: |
5“ |
|
Tweeter: |
0.75“ |
|
INPUT SECTION |
Input connector: |
2 euroblock |
|
Constant voltage: |
100 V, 70 V V |
|
Power Selection: |
30 - 20 - 10 - 5 W (100 V) |
|
CABINET |
Hardware: |
Body in self-extinguishing plastic |
|
Colour: |
White / Silver |
|
Grille: |
Steel |
|
PHYSICAL SPECIFICATIONS |
Height: |
270 / 10.62 |
|
Width: |
195 / 7.67 |
|
Depth: |
88 / 3.46 |
|
Net Weight: |
2.21 / 4.87 |
|
SHIPPING INFORMATION |
Package height: |
300 / 11.81 |
|
Package width: |
220 / 8.66 |
|
Package depth: |
165 / 6.49 |
|
Shipping Weight: |
2.84 / 6.26 |
|
JBL VRX915M 15'' 2-way 800W RMS Stage Monitor
Key Features :
Compact and low-profile for minimal obstruction of audience sightlines
50 x 90 nominal coverage
Bi-amplified or full-range passive operation
Differential Drive woofer with neodymium magnet for high power capacity and very light weight
4" (voice coil) diameter compression driver with neodymium magnet
Specifications:
Frequency Range
|
:
|
60 Hz - 20 kHz
|
Frequency Response
|
:
|
70 Hz - 20 kHz
|
Coverage Pattern
|
:
|
50 x 90 nominal
|
Crossover Modes
|
:
|
Passive / Bi-amp
|
Crossover Frequency
|
:
|
1.1 kHz
|
Power Rating2 (Continuous / Program / Peak)
|
:
|
Passive Full-Range 800 W / 1600 W / 3200W, 2 hrs1 Passive Full-Range 600 W / 1200 W / 2400W, 100 hrs
|
System Maximum SPL
|
:
|
127 dB SPL continuous (133 dB SPL peak)
|
System Sensitivity (1w @ 1m
|
:
|
98 dB SPL
|
LF Driver
|
:
|
1 x JBL 2265H 380 mm (15 in) Differential Drive?? woofer 8 Ohms
|
HF Driver
|
|
1 x JBL 2452H, 100 mm (4.0 inch) diameter voice coil, 38 mm (1.5 inch) exit, neodymium magnet compression driver 8 Ohms
|
Nominal Impedance
|
:
|
8 ohms
|
Active Tunings
|
:
|
Tunings available at www.jblpro.com
|
Enclosure
|
:
|
Symmetrical stage monitor, 15/18 mm, plywood
|
Finish
|
:
|
Black DuraFlex finish
|
Grille
|
:
|
Powder coated, black, 16 gauge perforated steel with acoustically transparent black screen backing
|
Input Connectors
|
:
|
Neutrik Speakon NL-4 (x2), one on each end
|
Dimensions (H x W x D)
|
:
|
629 mm x 432 mm x 324 mm (375 mm stage height) 24.75 in x 17 in x 12.75 in (14.75" stage height)
|
Net Weight
|
:
|
21 kg (46.0 lb)
|
|
Reviews
There are no reviews yet.