| Content |
The DYNACORD VL212 2-way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL212 is ideally suited to be used in most demanding applications. The VL212 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies two rugged DND 12350 transducers are used. The in-line topology guarantees excellent pattern control even for the low-mid frequency range. High frequencies are radiated from a rotatable 90°*45° CAD optimized constant directivity horn equipped with an Electro-Voice ND6 1.4” driver. The VL212 can be used in passive fullrange mode and can be switched from the outside to ʽbiampedʼ operation. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available. EASE and Ulysses data allow fast and precise simulations. The VL212 can be used as a general purpose stand-alone fullrange cabinet and as a satellite or delayed system cabinet in larger set ups.
Order No. D 113 133 Cabinet Full-Range Configuration Passive 2-Way Switchable to biamped mode Nominal impedance 4 Ohms Rated power RMS 800 Watts Program power 1600 Watts Peak power 3200 Watts SPL 2,83 V / 1m 2W / 4 Ohm 105 dB Max. SPL 1m (calculated with peak power) 137dB Frequency range ( -10dB ) Full range 80Hz - 19kHz Frequency range ( -10dB ) measured with H5000-RCM26 preset 50Hz - 19kHz Coverage angle 1 kHz -6dB 90° * 45° Passive crossover frequency 1.5kHz Active crossover frequency 1.5kHz 24dB/Oct. Linkwitz-Riley, 1,5kHz Linear-Phase FIR Voice coil tracking protection Yes Component HIGH Electro-Voice ND6-8 Neodymium Order No. 361493 Component LOW 2 x DND 12350 Order No. 366559 Connectors Full-Range 1+, 1- Wired through 2+, 2- Connectors Biamped Lo 1+, 1- Hi 2+, 2- Wired through 1+, 1-, 2+, 2- Connector model Speakon 2x NL4 MPR Dimensions (WxHxD) 385x1035x374mm Shipping weight kg Net weight 34kg Enclosure material Birch plywood Finish Black, 2-component paint Grille Powder coated steel, acoustic foam Handles 2
|
Features
* DVX3121 12" LF Transducer with forced air cooling
* ND2 2" Voice Coil, 1" Exit Neodymium CompressionDriver
* 60° x 60° Coverage Pattern
* 600W Continuous (2400W peak) power handling
* High sensitivity, 131 dB maximum SPL
* Adjustable monitor angle (45° or 55°)
* 2 Anchor plates for single stud fittings and 7integral suspension points
* Available in black or white
* Passive/biamp selectable
* Full line of accessories
Specifications
* Frequency Response (-3dB): 58Hz-15kHz
* Frequency Range (-10dB): 48Hz-20kHz
* Rec. Hipass Frequency: 50Hz
* Axial Sensitivity: 97dB (1W/1m)
* Max. Calculated SPL: 131 dB
* Horizontal Coverage: 60°
* Vertical Coverage: 60°
* Power Handling (Passive): 600W continuous, 1200Wprogram, 2400W peak
* LF Power Handling (Biamp): 500W continuous, 1000Wprogram, 2000W peak
* HF Power Handling (Biamp): 40W continuous, 80Wprogram, 160W peak
* LF Transducer: DVX3121, 12" driver
* HF Transducer: ND2, 1" exit Neodymium compressiondriver
* Crossover Frequency: 2kHz
* Nominal Impedance: 8 ohms
* Minimum Impedance: 6.2 ohms
* Connectors: (2) Neutrik Speakon NL4\'s
* Enclosure Material: Polypropylene structural foam
* Suspension: Enclosure has locations for 4 single-studattachment plates and10 forged steel eyebolts - 2 on top, 2 on bottom, 2 onside, and 1 on rear ofenclosure
* Grille: Polyester powder coated, 16GA Galvanizedsteel, with rotatable logo
* Dimensions (H x W x D): 24.14" x 15.64" x 14.26“
* Net Weight: 43.7 lbs
* Shipping Weight: 48.6 lbs |
The C5212 L is a full range extremely narrow dispersion two-way loudspeaker system for medium throw applications.
The high-frequency section is a constant directivity horn loaded to a 1.4” Neodymium compression driver with a 2.5” diaphragm assembly for smooth, wide dispersion.
The 60° x 40° horn design offers higher sensitivity for longer distance applications.
The low-frequency transducer is a 12” woofer with a 3” voice coil.
The crossover is easily bypassed for bi-amp via a recessed changeover switch.
| Features |
|---|
| 60° x 40° CMD (Constant Matching Design) constant directivity horn | | 1.4" neodymium compression driver with 2.5" diaphragm assembly | | 12" woofer with 3" voice coil | | Dual-function design: built in passive crossover or external bi-amp | | Rotatable Horn System for horizontal cabinet mounting applications | | HF driver AMCDP (Active Mosfet Compression Driver Protection) | | LICC (Low Impedance Compensated Crossover) network |
| Acoustical Specifications |
|---|
| Frequency Response -10 dB: | 54 Hz | ÷ 20 kHz | | Frequency Response -3 dB: | 65 Hz | ÷ 20 kHz | | Max SPL @ 1m: | 133 dB | | | Horizontal coverage angle: | 60° | | | Vertical coverage angle: | 40° | | | Directivity index; Q: | 10 | | | System Sensitivity: | 100 dB | | | Nominal Impedance: | 8 Ω | | | Power Handling: | 500 Watt | | | Peak Power Handling: | 2000 Watt | | | Recommended Amplifier: | 1000 | | | Protections: | Dynamic | | | Crossover frequencies: | 1200 Hz | |
| TRANSDUCERS |
|---|
| Compression Driver: | 2“HF driver, 2.5" voice coil | | | Nominal Impedence: | 8 Ω | | | Input Power Rating: | 100 Watt AES | | | Sensitivity: | 111 dB | | | Woofer: | 12“woofer, 3" voice coil | | | Nominal Impedence: | 8 Ω | | | Input Power Rating: | 400 Watts AES | | | Sensitivity: | 98 dB | |
| INPUT SECTION |
|---|
| Input connector: | Speakon NL4 - Full range or Bi-Amp | | | Output connector: | Speakon NL4 | |
| CABINET |
|---|
| Cabinet Material: | 15 mm birch plywood construction | | | Hardware: | 9 x M10 inserts | | | Handles: | 2 on side | | | Pole Mount/Cap: | Yes | | | Grille: | Custom perforated steel grille | | | Colour: | Black, white, scratch resistant paint | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 600/23.62 mm/inch | | | Width: | 364 / 14.33 mm/inch | | | Depth: | 385 / 15.16 mm/inch | | | Net Weight: | 23 / 50.7 Kg/Lbs | |
| A fullrange enclosure in classic 12“/1" format, this cabʼs balanced sonic image, speech intelligibility, and high SPL are certainly impressive. It is the perfect satellite for the PR:O 18 S. The PR:O 12 MA also features 600 watts power circuitry and a Speakon® port for connecting a passive auxiliary cabinet.
Features
Application: Fullrange Cabinet / Satellit
Power Capacity: 400/800 Watt
Max. SPL: 128 dB
Frequency Range: 68 Hz – 19 kHz
Title PREMIUM PR:O
Product Class Passive Systems
Model PR:O 12
Info Classic full-range cabinet doubles as compact PA or part of satellite system.
Power-handling nominal (RMS) 400 W
Power-handling, peak 1200 W
Power-handling, program 800 W
Frequency response +/- 3 dB 68 Hz – 19 kHz
Frequency response -10 dB 60 Hz – 19 kHz
Nominal impedance 8 ohms
Sensitivity 1W 104 dB
Maximum SPL, @ 10% THD 128 dB
Connections 2x Speakon
LF Speaker 12"
HF Driver 1"
Horn characteristics 60° x 40° CD horn
HF protection (passive) Dyn. protective circuit
Crossover frequency 2 kHz,12 dB / oct.
Pole mount DuoTilt 3/7
Rigging points 3x M8
Handles 2, integrated
Enclosure MDF
Grille metal grille with acoustic foam
Finish acrylic painture, black
Dimensions (WxHxD) 39 cm x 57 cm x 36 cm
Weight 18,5 kg / 40.8 lbs. |
The C5212 W is a full range extremely versatile wide-dispersion two-way loudspeaker system for medium throw applications.
The high-frequency section is a constant directivity horn loaded to a 1.4” Neodymium compression driver with a 2.5” diaphragm assembly for smooth, wide dispersion.
The low-frequency transducer is a 12” woofer with a 3” voice coil.
The crossover is easily bypassed for bi-amp via a recessed changeover switch.
| Features |
|---|
| 60° x 40° CMD (Constant Matching Design) constant directivity horn | | 1.4" neodymium compression driver with 2.5" diaphragm assembly | | 12" woofer with 3" voice coil | | Dual-function design: built in passive crossover or external bi-amp | | Rotatable Horn System for horizontal cabinet mounting applications | | HF driver AMCDP (Active Mosfet Compression Driver Protection) | |
LICC (Low Impedance Compensated Crossover) network
| Acoustical Specifications |
|---|
| Frequency Response -10 dB: | 54 Hz | ÷ 20 kHz | | Frequency Response -3 dB: | 65 Hz | ÷ 20 kHz | | Max SPL @ 1m: | 132 dB | | | Horizontal coverage angle: | 90° | | | Vertical coverage angle: | 40° | | | Directivity index; Q: | 10 | | | System Sensitivity: | 99 dB | | | Nominal Impedance: | 8 Ω | | | Power Handling: | 500 Watt | | | Peak Power Handling: | 200 Watt | | | Recommended Amplifier: | 1000 | | | Protections: | Dynamic | | | Crossover frequencies: | 1200 Hz | |
| TRANSDUCERS |
|---|
| Compression Driver: | 2“HF driver, 2.5" voice coil | | | Nominal Impedence: | 8 Ω | | | Input Power Rating: | 100 Watt AES | | | Sensitivity: | 111 dB | | | Woofer: | 12" woofer, 3" voice coil | | | Nominal Impedence: | 8 Ω | | | Input Power Rating: | 400 Watts AES | | | Sensitivity: | 98 dB | |
| INPUT SECTION |
|---|
| Input connector: | Speakon NL4 - Full range or Bi-Amp | | | Output connector: | Speakon NL4 | |
| CABINET |
|---|
| Cabinet Material: | 15 mm birch plywood construction | | | Hardware: | 9 x M10 inserts | | | Handles: | 2 on side | | | Pole Mount/Cap: | Yes | | | Grille: | Custom perforated steel grille | | | Colour: | Black, white, scratch resistant paint | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 600 / 23.62 mm/inch | | | Width: | 364 / 14.33 mm/inch | | | Depth: | 385 / 15.16 mm/inch | | | Net Weight: | 23 / 50.7 Kg/Lbs |
|
|
- High-power 2-way PA sound reinforcement speaker system for live and playback applications (200 Watts Continuous / 800 Watts Peak Power)
- Available in black or white finish
- Ultra-compact and light weight system delivers excellent sound even at extreme sound pressure levels
- Extremely powerful 12" long-excursion driver provides incredibly deep bass and acoustic power
- State-of-the-art 1.75'' titanium-diaphragm compression driver for exceptional high-frequency reproduction
- Ultra-wide dispersion, large-format exponential horn
- Overload-protection circuitry ensures optimal HF driver protection
- Versatile trapezoidal enclosure design allows different positioning:
- -Stand mounting with 35-mm pole socket
- -Tilts on its side for use as a floor monitor
- Optional swiveling mounting brackets
- Ergonomically shaped handles for easy carrying and setup
- 2 professional speaker connectors plus 1⁄4'' jack connectors
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany
These loudspeakers take everything musicians love about the original B212 loudspeakers and upgrade them with the same bass and treble/mid transducers found in our wildly popular B212A active version for even better sound and power handling. And with integrated overload protection circuitry, they arrive ready to push it to the limit without putting their high or low frequency drivers in danger.
Triumphant transducers
Every stitch of these loudspeakers is built to deliver, but the fact is that their transducers (woofers and tweeters) are the only part you actually hear. While some manufacturers are okay with putting off-the-shelf transducers in their boxes, we custom-design and build ours from scratch. Not only do we wind our own voice coils, we grow the trees that are processed into the paper pulp that becomes the cones. We even machine the frames and backplates. BEHRINGER's quality is truly under control.
Big sound, lightweight, low price
Big here, small there, lots of this, light on that—everyone's got their preferences, but the EUROLIVE B212XL has proportions we can all agree upon. These loudspeakers pack a clean, punchy wallop (and can handle up to 800 Watts), they are easy to lift by their recessed handles (24 lbs) and are available at insanely low prices. Who wouldn't want to hook up with one of these beauties?
Get on the stick…or get on down
The B212XL is perfect either as part of a PA system or as an onstage monitor. If the situation calls for a PA, mount the speakers on stands via the 35mm pole socket. From there, send a line from the MAIN OUT of a mixer (such as a XENYX 1202FX) to a power amplifier (like the EUROPOWER EP1500). Finally, attach a B212XL to each of the amp's outputs. These loudspeakers have inputs for both professional speaker cable and ¼" cable. Because they have two parallel inputs, you can connect up to two of them to any channel on a power amp.
But these loudspeakers don't have to be confined to an upright position. Just lay them on their sides for use as a floor monitor. You'll find that they tilt to the ideal angle for onstage monitor wedge applications.
Choose white, black, on or off the wall…
You asked for it, and now we're proud to offer these amazing loudspeakers in black or white. We now also make swiveling wall-mount brackets for the B212XL. That means they're ready to fit even more comfortably into a venue's color scheme and layout. No matter what your sound or aesthetic needs may be, we make one that's just right for you! |
Reviews
There are no reviews yet.