Description | | Characteristics
- Amplifier type: category AB
- Maximum output power: 61 W
- RMS power: 15 W / 30 W maximum per channel
- Woofer 2.75 ”aramid fiber
- Tweeter 0.75 ”Silk dome
- Inputs: 3.5 mm stereo mini-jack, RCA L / R, USB, Bluetooth
- Outputs: RCA variable line-out, 3.5 mm mini-jack headphone out
- Input voltage: 110-240 V 50/60 Hz auto-switching
- SNR> 95 dB (typical A-weighted)
- THD + N <0.05% in all power settings
- Crosstalk <50 dB
- Frequency response: 65 Hz-22 kHz ± 2.0 dB
- Input resistance: 5K ohms unbalanced
- Protection: Output current limitation, thermal overheating, temporary on / off protection
| | | Characteristics
- Amplifier type: category AB
- Maximum output power: 61 W
- RMS power: 15 W / 30 W maximum per channel
- Woofer 2.75 ”aramid fiber
- Tweeter 0.75 ”Silk dome
- Inputs: 3.5 mm stereo mini-jack, RCA L / R, USB, Bluetooth
- Outputs: RCA variable line-out, 3.5 mm mini-jack headphone out
- Input voltage: 110-240 V 50/60 Hz auto-switching
- SNR> 95 dB (typical A-weighted)
- THD + N <0.05% in all power settings
- Crosstalk <50 dB
- Frequency response: 65 Hz-22 kHz ± 2.0 dB
- Input resistance: 5K ohms unbalanced
- Protection: Output current limitation, thermal overheating, temporary on / off protection
|
- Easily connect your compatible Bluetooth devices for high-quality wireless playback
- Active speaker with a passive slave speaker, with the ability to daisy-chain multiple sets
- 2-way speaker design with flared baffles for a smooth full-range frequency response
- Quick and easy to install in false or suspended ceilings using the built-in dog-ear clamps
- Comes complete with an in-line 12VDC power supply for intuitive use out of the box
|
Content |
Description
The Edifier 2.0 R1080BT compact set is a new, refreshed version of the classic Edifier R1000T4 set. The elegant wooden MDF enclosure minimizes acoustic resonance , while the 4-inch woofers and 3/4-inch silk tweeters provide a deep, rich sound. To fully personalize the audio settings, a panel with knobs is located on the back of the speaker to adjust the volume and bass . The Edifier R1080 Bluetooth also has dual stereo line-in ports with dynamic treble amplification on port A.
However, the most important innovation is the ability to sync with Bluetooth devices. These studio speakers are a huge power, enclosed in a small housing.Edifier R1080BT computer speakers allow you to easily set your own preferences for listening to music. Thanks to this, they provide an unforgettable experience to fans of all genres .
Specifications
-
TrueWireless(tm) Stereo Plus with Bluetooth 5.0 aptX for better connectivity and easy pairing
-
Up to 32 hours of battery life with magnetic charging case.
-
Up to 10m (30ft) connection distance (with walls)
-
cVc noise reduction for better mic quality
-
Listen with one or both earbuds without losing sound channels
-
Ergonomic and splashproof with touch controls
-
Improved wireless signal distance
-
Automatic connect and shutdown features
TOTAL POWER OUTPUT
RMS 12W × 2
SIGNAL-TO-NOISE RATIO
≥85dBA
INPUT TYPE
Dual RCA input (AUX, LINE-IN, BLUETOOTH)
INPUT SENSITIVITY
PC: 700±50mV AUX: 550±50mV (THD + N=1%)
TWEETER UNIT
Φ13mm silk domed tweeter, 4Ω
THD + N
10%
DISTORTION
≤0.5%
FREQUENCY RESPONSE
70 HZ-20 kHz +/-9db
BLUETOOTH VERSION
V5.0
BASS UNIT
4 inch (106mm), 6Ω
DIMENSION
155(W) × 115(H)× 238(D)mm
|
PRODUCT DESCRIPTIONAudioengine HD3 Self-Amplifying Bookshelf Speakers 2.75 ”15W RMS Walnut (Pair) artsound hxeio wireless2
The HD3 High Power Speakers are a mini home music system with high fidelity stereo sound for smaller spaces and desktops. Wired or wireless connections, including USB audio from your PC, wireless aptX-HD Bluetooth long-range from your phone, or the good old-fashioned 80's analog vintage turntable or cassette player.
HD3 wireless speakers work with all your applications, music and devices. Tidal, Spotify, Pandora… all your favorite streaming apps play right away.
AptX-HD long range wireless Bluetooth
High quality sound wrapped in handmade wooden cabinets
Simple setup, no receiver required
There are no push buttons and inputs that are always ready
Front panel volume control and headphone jack
HD3 cordless speakers are small speakers with surprisingly loud sound for their size.
No network setup, login passwords, or forward buttons Setting up these speakers is simple and easy.
The HD3 wireless speakers are made with custom Audioengine accessories: aramid fiber woofer, silk tweeters, aptX HD Bluetooth and built-in power amplifiers wrapped in handmade precision cabinets.
Clear, complete and powerful sound that fills almost any space.
Built-in analog power amplifiers sound incredible compared to lower cost digital amplifiers.
A completely new audio experience guaranteed. | R1280DB
Newly upgraded version of an instant classic
- RCA/AUX, Bluetooth, Optical, and Coaxial Connection
- Newly redesigned remote with new features
- Speaker cable connects the speakers together
Edifier\'s Speakers Just Got Better
The R1280DB has the classic look you love with all new features of modern powered Bluetooth speakers. The clean wooden finish of the R1280DB bookshelf speakers leave a lasting impression of elegance and luxury. The upgraded specs accommodate a standard of professionalism while improving quality and performance. The naturally fine tuned Bluetooth bookshelf speaker is enjoyable in just about any setting enhancing the style of your domestic living space.
All New Style
A newly refined look you love with a twist. Black wood keeps the classic look with a fresh twist on the style of modern technology. Innovation and style are important elements that accompany the feel of the R1280DB Bluetooth bookshelf speakers. Hi-tech quality and style drive the overall experience of this powerful black bookshelf speaker. Upon first glance the black wood finish gives any reviewer the impression of a sleek and stealthy Bluetooth speaker ready to deliver powerful performance.
On-Board Controls
Adjust the EQ using the on-board controls located on the active/powered Bluetooth speaker. Treble, bass, and volume knobs located on the side panel. The clear accessibility to on-board controls and modern functionality heighten the amiability of the R1280BD powered Bluetooth speakers. Clear and concise controls compliment the manual providing uninterrupted playtime.
Fully Featured Inputs
Achieve HD audio with the help of the optical and coaxial inputs which are additions to the R1280DB Bluetooth speakers. We have kept the two RCA connections for both RCA and AUX connection. Also, wirelessly connect to your phone or laptop with Bluetooth. Edifier Bluetooth bookshelf speaker specs provide for the quintessential modern experience. Comprehension and control, all at your fingertips.
Wireless Remote
Easily switch between inputs, adjust volume and power with the use of the remote. The features of our black remote add that extra layer of modern delight. Comfort and convenience is what the R1280DB seeks to provide with inclusion of the remote. Control at your fingertips yet again, with the R1280DB Bluetooth powered bookshelf speakers.
All New Remote
With the newly redesigned wireless and sleek black remote the R1280DB puts the power in your hands. Control your powered Bluetooth bookshelf speakers and connect to your device in total comfort. Activate playback with the buttons located in the square with the Bluetooth logo.
- TOTAL POWER OUTPUT:R/L: 21W+21W RMS
- SIGNAL TO NOISE RATIO:≥85dBA (A)
- NOISE LEVEL:≤25dB (A)
- INPUT SENSITIVITY:LINE IN1: R/L:450±50mV
LINE IN2: R/L:550±50mV
OPT/COA: R/L:500±50mFFS
Bluetooth: R/L:700±50mFFS
- FREQUENCY RESPONSE:55Hz-20KHz
- BASS UNIT:4 inch (116mm)
- TWEETER UNIT:: Φ13mm silk dome tweeter
- DIMENSON:5.75in x 9.5in x 7in (WxHxD)
|
Description
The Edifier 2.0 R1080BT compact set is a new, refreshed version of the classic Edifier R1000T4 set. The elegant wooden MDF enclosure minimizes acoustic resonance , while the 4-inch woofers and 3/4-inch silk tweeters provide a deep, rich sound. To fully personalize the audio settings, a panel with knobs is located on the back of the speaker to adjust the volume and bass . The Edifier R1080 Bluetooth also has dual stereo line-in ports with dynamic treble amplification on port A.
However, the most important innovation is the ability to sync with Bluetooth devices. These studio speakers are a huge power, enclosed in a small housing.Edifier R1080BT computer speakers allow you to easily set your own preferences for listening to music. Thanks to this, they provide an unforgettable experience to fans of all genres .
Specifications
-
TrueWireless(tm) Stereo Plus with Bluetooth 5.0 aptX for better connectivity and easy pairing
-
Up to 32 hours of battery life with magnetic charging case.
-
Up to 10m (30ft) connection distance (with walls)
-
cVc noise reduction for better mic quality
-
Listen with one or both earbuds without losing sound channels
-
Ergonomic and splashproof with touch controls
-
Improved wireless signal distance
-
Automatic connect and shutdown features
TOTAL POWER OUTPUT
RMS 12W × 2
SIGNAL-TO-NOISE RATIO
≥85dBA
INPUT TYPE
Dual RCA input (AUX, LINE-IN, BLUETOOTH)
INPUT SENSITIVITY
PC: 700±50mV AUX: 550±50mV (THD + N=1%)
TWEETER UNIT
Φ13mm silk domed tweeter, 4Ω
THD + N
10%
DISTORTION
≤0.5%
FREQUENCY RESPONSE
70 HZ-20 kHz +/-9db
BLUETOOTH VERSION
V5.0
BASS UNIT
4 inch (106mm), 6Ω
DIMENSION
155(W) × 115(H)× 238(D)mm
|
PRODUCT DESCRIPTION
The HD3 High Power Speakers are a mini home music system with high fidelity stereo sound for smaller spaces and desktops. Wired or wireless connections, including USB audio from your PC, wireless aptX-HD Bluetooth long-range from your phone, or the good old-fashioned 80's analog vintage turntable or cassette player.
HD3 wireless speakers work with all your applications, music and devices. Tidal, Spotify, Pandora… all your favorite streaming apps play right away.
AptX-HD long range wireless Bluetooth
High quality sound wrapped in handmade wooden cabinets
Simple setup, no receiver required
There are no push buttons and inputs that are always ready
Front panel volume control and headphone jack
HD3 cordless speakers are small speakers with surprisingly loud sound for their size.
No network setup, login passwords, or forward buttons Setting up these speakers is simple and easy.
The HD3 wireless speakers are made with custom Audioengine accessories: aramid fiber woofer, silk tweeters, aptX HD Bluetooth and built-in power amplifiers wrapped in handmade precision cabinets.
Clear, complete and powerful sound that fills almost any space.
Built-in analog power amplifiers sound incredible compared to lower cost digital amplifiers.
A completely new audio experience guaranteed. |
Take your ceiling installation to the next level. Boasting intuitive Bluetooth connectivity, the Adastra BCS52S Ceiling Speakers let you play your music wirelessly with ease. Bluetooth connectivity is switchable, whilst line inputs and outputs let you hook up other sound sources as well as providing simple daisy-chaining capabilities. Combined with their 2-way design and flared baffles, the BCS52S speakers provide you with smooth, high-quality full-range audio for domestic and commercial installations.
The speakers are simple to fit and operate. With integrated dog-ear mounts, you can unobtrusively mount the speakers to false/suspended ceiling tiles with ease. The single active speaker is powered by the included 12VDC PSU, which then drives the other passive slave speaker. And with low-profile magnetic grilles, your speakers can be made to blend with your decor for a subtle and understated look.
In the Box
- 1 x Active Bluetooth Ceiling Speaker
- 1 x Passive Ceiling Speaker
- 1 x In-Line 12VDC Power Supply
- 1 x 3-Metre Speaker Connection Cable
Features
- Ceiling speaker set with switchable Bluetooth connectivity
- Simple playback compatibility with various devices
- One active speaker with a Bluetooth receiver, and one passive slave speaker
- Active speaker boasts an RCA line input and output for daisy-chaining multiple sets
- Each speaker features low and high-frequency drivers plus flared baffles
- Smooth full-range response from 80Hz to 20kHz
- Understated low-profile magnetic grilles
- Dog-ear clamps provide quick and easy installation
- Includes an in-line 12VDC power supply for easy use
- Suitable for domestic and commercial use
Specifications
- Transducers:
- LF Driver: 5.25'' (135mm)
- HF Driver: 0.5'' (12mm) neodymium dome tweeter
- Sensitivity: 89dB
- Dispersion Angle: 160°
- Frequency Response: 80Hz - 20kHz
- Impedance: 4 Ohms (each speaker)
- Bluetooth Version: 5.0
- Mounting Depth:
- Active: 95mm
- Passive: 75mm
- Cutout: 180mm (each speaker)
- Housing Material: ABS plastic
- Power Supply: In-line 100-240VAC/12VDC PSU (included)
- Dimensions:
- Active: 97mm x 205mm
- Passive: 76mm x 205mm
- Weight: 1.78kg (per set)
|
Reviews
There are no reviews yet.