| Content | Axial Sensitivity 95 dB
Case Material 9-ply, 15mm Plywood, Internally Braced, with Texured Paint
Frequency Response (-3 dB) 75 Hz - 18 k Hz
Frequency Response (-10 dB) 50 Hz - 20 k Hz
Recommended High-Pass Frequency 40 Hz
Max. SPL/1m (calc) 134 dB
Coverage
(Nominal -6 dB) H° 90 °
Coverage
(Nominal -6 dB) V° 50 °
LF Transducer (1) EVS-15K, 381mm (15”) Woofer
HF Transducer DH-1K, 39mm (1.5”) Titanium Diaphragm Compression Driver
Crossover Frequency 1.7 k Hz
Nominal Impedance (Passive) 8 Ω
Minimum Impedance 7.4 Ω
Connector Type Dual NL4
Grill 18GA Steel with Black Powdercoat
Height 708 mm (27.87“)
Width 432 mm (17.01“)
Depth 382 mm (15.04“)
Weight Net 23 kg (50.71 lbs)
Shipping Weight 27.8 kg (61.29 lbs) |
The passive dB500 has many of the same features as the dB500a, including the same rugged enclosure, and advanced drivers. A natural sounding fixed crossover is built-in, and the back panel features 1/4" and Speakon connectors.
The dB500 speaker cabinet features an array of mounting options. Designed with floor monitoring in mind, they are also easily stacked or permanently installed. A 1 3/8" pole receptacle is built in, and 10 reinforced fly points are available.
|
The Electro-Voice TX1152 Tour-X is a high power, high sensitivity, 15" 2-way PA loudspeaker system to use when high-quality sound reinforcement is required in a lightweight package.
The TX1152 PA speaker uses a DH3, high output 1.25" titanium compression driver, coupled to a Constant Directivity 60 degree x 40 degree horn. This combination results in a smooth response to 20 kHz and excellent pattern control in medium throw applications.
The SMX2151 15" woofer has an FEA optimized magnet structure and a shorting ring for ultra low distortion and maximum intelligibility at high SPL levels. The crossover uses steep 24 dB/octave slopes with equalization for very smooth response in vocal range, extended HF, and a protection circuit for long-term reliability.
The TX1152 has a variety of features that make it equally suited for portable or fixed installation applications. The trapezoidal enclosure is constructed out of a combination of plywood and MDF, and coated with EVCoat for maximum strength while still remaining lightweight. The unique grille design is very strong, dent resistant, and features a rotatable logo. Four way handles allow for gripping in a variety of positions, a pole mount allows for placement on a subwoofer or a tripod. Six 3/8" threaded points allow a single TX1152 to be suspended in a various positions. The recessed input panel with dual NL4 connectors panel keeps the connectors hidden, while allowing the TX1152 to be used with the TX1181 subwoofer for extended sub bass on a single amplifier channel, with no additional processing needed. |
|
Built with the same rugged, injection molded chassis as our Titan™ 12, the Titan™ 15 is using custom designed, heavy duty 15" low frequency driver with 2" titanium high frequency compression driver. The Titan™ 15 is at home indoors or outdoors, on stage, in studios, at rehearsals, theaters, houses of worship and just about anywhere that needs a higher standard of audio reproduction. Use the Titan™ 15 with the optional tripod floor stands, the unique dual-head array adapter, optional wall mount or even on its side as a floor monitor. The Titan 15 moisture proof woofer makes it the ideal choice for outdoor gigs and festival applications. No matter what the application, Titan™ 15 is up for the challenge.
| |
SPECIFICATIONS
| | MODEL | TITAN 15 PASSIVE | | GENERAL INFO |
| | System type | 15" 2-way passive | | Frequency response +/- 3db | 50-18kHz | | Sensitivity (db 1w@1m) | 97dB | | System impedance | 8 ohms | | Maximum SPL Peak dB | 129dB | | POWER HANDLING (Watts) |
| | Continuous RMS | 400 | | Program | 800 | | Peak | 1600 | | LF DRIVER |
| | Lf driver size mm / inches | 1x15“ | | Lf voice coil size | 75mm/3“ | | HF SECTION |
| | Hf voice coil size | 51mm/2" | | Hf type | Compression Driver | | Hf diaphragm material | Titanium | | Horn dispersion (H x V) | 90 x 60 | | Hf exit size mm / inches | 25mm/1“ | | Hf horn shape | EWG™ - Elliptical Waveguide | | Hf peak indicator | Peak LED ring in horn throat | | CROSSOVER SECTION | 2-way | | Crossover Frequency / Filter | 1.8kHz / 12dB per oct. | | Hf driver protection | DTF™ - Dynamic Thermal Filament (2 x SK3 Bulb) | | PHYSICAL FEATURES |
| | Finish | Black or White | | Handle quantity | 2 carry handles (one on each side) | | Suspension points | (10) M8 points for safe flown applications, (4) M8 inserts on bottom in OmniMount® 60.0-type footprint | | Stand adapter - BOTTOM | Pole-mount receptacle with lock screw, Optional wall-mount bracket | | Enclosure type | Molded Polypropylene | | Enclosure shape | Trapezoidal for vertical array and horizontal stage monitor applications | | IN / OUT PANEL (speaker Level) |
| | Input connector | 2 x 1/4" jacks and2 x Speakon™ | | DIMENSIONS & WEIGHT |
| | Height ( mm / ins ) | 708mm/27.9“ | | Width Front / Rear / mm / ins | 477.8mm/18.8“ | | Depth ( mm / ins ) | 401.77mm/15.8“ | | Net weight ( kg / lbs ) | 22kg/48.4 lbs | | Gross weight ( kg / lbs ) | 25kg/55 lbs | |
|
The RCFACUSTICA H1315 is a three-way full range loudspeaker system that incorporates a 15” woofer, a 10” midrange and a 1.4” exit titanium compression driver for long throw applications.
The system is very compact and provides very high output and accurate voice and sound reproduction. The system is equipped with the latest generation of RCF precision transducers, all of them with powerful neodymium motors.
The internal passive filter provides crossover and equalization between the midrange and the compression driver.
The system is driven in bi-amped mode, is capable of producing a Max SPL of 136 dB and handles 900 Watts AES (LF) + 400 Watt AES (MF/HF). The loudspeaker enclosure shape is multi-trapezoidal and offers a double coupling angle each side.
| Features |
|---|
| Compact Arrayable 3-way System | | Fully Horn-loaded, 90° x 60° directivity | | 15" neodymium woofer with 4" voice coil | | 10" neodymium midrange | | 1.4" compression driver | | 136 dB Max SPL | | Bi-amp system (passive crossover MF/HF included) | | Active Mosfet Compression Driver Protection | | Rotable HF Horn | | Recessed handles |
| Acoustical Specifications |
|---|
| Frequency Response -10 dB: | 50 Hz | ÷ 20 kHz | | Frequency Response -3 dB: | 65 Hz | ÷ 20 kHz | | Max SPL @ 1m: | 136 dB | | | Horizontal coverage angle: | 60° | | | Vertical coverage angle: | 40° | | | Directivity index; Q: | 12 | | | System Sensitivity: | 100 LF, 108 MF/HF dB | | | Nominal Impedance: | 8 LF, 8 MF/HF Ω | | | Power Handling: | 900 LF, 400 MF/HF Watt | | | Peak Power Handling: | 3600 LF, 1600 MF/HF Watt | | | Recommended Amplifier: | 1800 LF, 800 MF/HF | | | Protections: | Active mosfet compression driver protection | | | Crossover frequencies: | Recommended 500, internal mf/hf 1300 Hz | |
| TRANSDUCERS |
|---|
| Compression Driver: | 3" HF driver, 75 mm voice coil | | | Nominal Impedence: | 8 Ω | | | Input Power Rating: | 110 Watt AES | | | Sensitivity: | 109 dB | | | Midrange: | 10" midrange, 3" voice coil | | | Nominal Impedence: | 8 Ω | | | Input Power Rating: | 300 Watt AES | | | Sensitivity: | 109 dB | | | Woofer: | 15" woofer, 4" voice coil | | | Nominal Impedence: | 8 Ω | | | Input Power Rating: | 900 Watts AES | | | Sensitivity: | 100 dB | |
| INPUT SECTION |
|---|
| Input connector: | Speakon NL4 - Full range or Bi-Amp | | | Output connector: | Speakon NL4 | |
| CABINET |
|---|
| Cabinet Material: | Double trapezoidal, 15 mm birch plywood construction | | | Hardware: | 12 x M10 rigging point | | | Handles: | 2 side | | | Grille: | Custom perforated steel grille | | | Colour: | Black, scratch resistant paint | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 890/ 35.03 mm/inch | | | Width: | 520/ 20.47 mm/inch | | | Depth: | 632 / 24.88 mm/inch | | | Net Weight: | 45 / 99.20 Kg/Lbs |
|
- 1.4" compression driver with 3" voice coil
- 15" woofer, high power, 3.5" voice coil
- 133 dB max spl
- Input Power Rating: 650 W AES
ART 725 MK4 is a passive two-way system with an accurate acoustic design for club installations and live music. Thanks to the high quality compression driver with a 3” voice coil and the 15” woofer, the ART 725 MK4 delivers clear high frequencies, punchy bass and full and precise mid frequencies. The new aluminium rear panel is equipped with Speakon in/out connectors.
Specifications
Acoustical specifications
Frequency Response (-10dB):
55 Hz ÷ 20000 Hz
Max SPL @ 1m:
133 dB
Horizontal coverage angle:
90°
Vertical coverage angle:
60°
System Sensitivity:
99 dB
Power section
Crossover frequencies:
1400
Transducers
Compression Driver:
1.4'' neo, 3.0'' v.c
Nominal Impedance (Ohm):
8 ohm
Input Power Rating:
110 W AES, 220 W PEAK
Sensitivity (dB, 1W @ 1m):
109 dB, 1W @ 1m
Woofer:
15'' neo, 3.5'' v.c
Nominal Impedance (Ohm):
8 ohm
Input Power Rating:
650 W AES, 1300 W PEAK
Sensitivity (dB, 1W @ 1m):
98 dB, 1W @ 1m
Input/Output section
Input connectors:
Speakon
Output connectors:
Speakon
Standard compliance
CE marking:
Yes
Physical specifications
Cabinet/Case Material:
PP Composite
Hardware:
2 x M10
Handles:
1 Top, 2 Side
Pole mount/Cap:
Yes
Grille:
Steel
Color:
Black
Size
Height:
708 mm / 27.87 inches
Width:
437 mm / 17.2 inches
Depth:
389 mm / 15.31 inches
Weight:
20.5 kg / 45.19 lbs
Shipping informations
Package Height:
725 mm / 28.54 inches
Package Width:
550 mm / 21.65 inches
Package Depth:
505 mm / 19.88 inches
Package Weight:
23.7 kg / 52.25 lbs |
Reviews
There are no reviews yet.