| Content |
The ND44 Dynamic Tight Cardioid Instrument Microphone from Electro-Voice is a high-performance, large-diaphragm instrument microphone with a tight cardioid polar pattern. It can be used in various environments to capture audio for drums, and other rhythm section instruments in studio, live sound, and rehearsal applications.
The microphone offers excellent isolation from other nearby instruments and has an 80 Hz to 16.5 kHz frequency response. The ND44 capsule is tuned to deliver an aggressive and punctuated sound and requires no additional power to operate. In addition, the microphone features a pivoting head and drum rim clamp that makes mic placement easy and precise. It is built with a 3-pin XLR connector.
Well-suited acoustic control with aggressive and punctuated sound.Large-diaphragm dynamic capsule that creates a rich and detailed frequency response.Offering easy mic placement with a pivoting head, the ND44 low profile and dual pivot points solve virtually any mic placement challenge.DRC-2 drum rim clamp is made with an easy-to-use finger loop design. The clamp material is soft and compliant, and its handy finger loop allows a firm grip and simple motion.Humbucking coil guards against line hum and allows you to use with confidence near speaker cabinets and EMF-generating equipment racks.Memraflex grille resists denting. A durable and tight-mesh grille is built to withstand extraordinarily rough treatment.
| Frequency Response |
80 Hz to 16.5 kHz |
| Material of Construction |
Die-cast zinc
ABS polycarbonate head |
| Connector Type |
3-pin XLR |
| Diameter |
1.91" (48.5 mm) |
| Impedance |
350 Ohms, Low-Z balanced |
| Maximum SPL |
>140 dB |
| Type of Microphone |
Instrument |
| Open Circuit Voltage |
2.4 mV/Pascal |
| Polar Pattern |
Tight Cardioid |
| Power Requirement |
Passive |
| Height |
5.47" (139 mm) |
| Weight |
6.84 oz (194 g) |
| The e 604 is a cardioid microphone especially suitable for use with drums and brass instruments.
Features
Rugged reinforced glass-fibre body
Low sensitivity to impact and handling noise
Very high sound pressure handling capability
Low distortion microphone
Hum compensating coil
Easy to position due to compact design
Integral stand mount
Delivery Includes
1 e 604
1 drum clip
1 pouch
Technical Data
Frequency Response 40.....18000 Hz
Sensitivity in free field, no load (1kHz) 1,8 mV/Pa
Min. terminating impedance 1000 Ohm
Dimensions d 33 x 59 mm
Weight w/o cable 60 g | Optimized for low-frequency bass punch/high-power SPL handling. Designed for kick drum.
The Shure BETA®52A is a high output dynamic microphone with a tailored frequency response designed specifically for kick drums and other bass instruments. It provides superb attack and "punch“, and delivers studio quality sound even at extremely high sound pressure levels.
The Beta 52A features a modified supercardioid pattern throughout its frequency range to insure high gain-before-feedback and excellent rejection of unwanted sound. A built in dynamic locking stand adapter with an integral XLR connector simplifies installation, particularly if the microphone is to be placed inside a kick drum. The stand adapter keeps the microphone position fixed and resists slipping, even when subjected to sharp blows and strong vibrations. A hardened steel mesh grille protects the Beta 52A from the abuse and wear associated with touring.
Features
- Frequency response shaped specifically for kick drums and bass instruments
- Built–in dynamic locking stand adapter with integral XLR connector simplifies setup, especially inside a kick drum
- Studio quality performance, even at extremely high sound pressure levels
- Supercardioid pattern for high gain before feedback and superior rejection of unwanted noise
- Hardened steel mesh grille that resists wear and abuse
- Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
- Neodymium magnet for high signal–to–noise ratio output
- Low sensitivity to varying load impedance
- Legendary Shure quality and reliability
| Type |
Dynamic (moving coil) |
| Frequency Response |
20 to 10,000 Hz |
| Polar Pattern |
Supercardioid, rotationally symmetrical about microphone axis |
| Output Level |
Open Circuit Voltage: -64 dBV/Pa* (0.6 mV), *1 Pa = 94 dB SPL |
|
Audio Frequency Response 50 Hz - 16,000 Hz
Case Material Die cast zinc
Connector Type 3-pin XLR
Element Dynamic
Finish Textured Satin Black
Impedance, Low-Z balanced 600 Ω
Mic Type Instrumental
Open Circuit Voltage 2.2 mV/Pascal
Polar Pattern Supercardioid
Power Requirement Passive
Wired/Wireless Wired
Weight Net 8.32 oz (236 g)
|
The super-cardioid e 609 instrument microphone has been specially developed for miking guitar cabs face on and extremely close to the signal source.
Pick-up pattern : Super-cardioid
Frequency response : 40.....15000 Hz
Sensitivity in free field, no load (1kHz) : 1,5 mV/Pa
Nominal impedance : 350 Ohm
Min. terminating impedance : 1000 Ohm
Dimensions : 55 x 34 x 134 mm
Weight : 140 g
|
Audio Frequency Response 20 Hz - 10,000 Hz
Case Material Die cast zinc
Connector Type 3-pin XLR
Element Dynamic
Finish Textured Satin Black
Impedance, Low-Z balanced 150 Ω
Mic Type Instrumental
Open Circuit Voltage 0.63 mV/Pascal
Polar Pattern Supercardioid
Power Requirement Passive
Shipping Weight 23.7 oz (672 g)
Wired/Wireless Wired
Weight Net 12.84 oz (364 g)
|
Reviews
There are no reviews yet.