Content |
Chassis Size 381 mm (15“) Color Black Directivity Index 11.6 dB Input Connections 2 four-pin Speakon Speaker Type Two-Way Speaker Type Wedges Speaker Type Fullrange Frequency Response (-3 dB) 55 - 18000 Hz Frequency Response (-10 dB) 46 - 20000 Hz Internal Crossover No Sensitivity 1 W/1 m 99 dB Max. SPL/1m (calc) 133 dB Coverage (Nominal -6 dB) H° 55 ° Coverage (Nominal -6 dB) V° 80 ° Rotatable Horn No LF Transducer EVX155 Low Frequency Power Handling (Continuous/Program/Peak) 600 Watts High Frequency Power Handling (Continuous/Program/Peak) 75 Watts LF Nominal Impedance 8 Ω HF Transducer ND6-16 HF Nominal Impedance 16 Ω Minimum Impedance 7.2/14.3 Ω Enclosure Material 13-ply birch plywood with Futura Flying No Outdoor No Height 644 mm (25.35“) Width 457 mm (17.99“) Depth 340 mm (13.39“) Weight Net 28.4 kg (62.61 lbs) |
Chassis Size 304.8 mm (12“) Color Black Directivity Index 11.6 dB Input Connections 2 four-pin Speakon Speaker Type Two-Way Speaker Type Wedges Frequency Response (-3 dB) 65 - 16000 Hz Frequency Response (-10 dB) 50 - 20000 Hz Internal Crossover No Sensitivity 1 W/1 m 98 dB Max. SPL/1m (calc) 129 dB Coverage (Nominal -6 dB) H° 55 ° Coverage (Nominal -6 dB) V° 80 ° Rotatable Horn No LF Transducer DL12ST Low Frequency Power Handling (Continuous/Program/Peak) 300 Watts High Frequency Power Handling (Continuous/Program/Peak) 75 Watts LF Nominal Impedance 8 Ω HF Transducer ND6-16 HF Nominal Impedance 16 Ω Minimum Impedance 8.2/10.5 Ω Enclosure Material 13-ply birch plywood with Futura Flying No Outdoor No Height 584 mm (22.99“) Width 449 mm (17.68“) Depth 313 mm (12.32“) Weight Net 21.9 kg (48.28 lbs) |
The CS2.1 Cuban Speaker features a 2" full range loudspeaker with a shielded neodymium magnet, which is capable of producing up to 10 W RMS, with a maximum of 20 W. The standard speaker impedance is 8 Ohm, but through an additional 100 V Line transformer, it also can be used on 100 V PA systems.
- Model Name / Type: AUCS2.1 / cuban speaker
- Max . Power: 20 W
- RMS Power: 10 W
- Sensitivity (1 W / 1 m): 85 dB
- Max. SPL: 95 dB
- Impedance: 8 ohms
- Frequency Response (±3 dB): 250 Hz - 18 kHz
- Dimensions (W x H x D): 102 x 102 x 90 mm
|
PRICE PER UNIT ADAMs A7 & A7X: the evolution of a legend The predecessor to the A7X, the A7, became the most famous of all ADAM monitors in a very short time. Not only has it been reviewed over three dozen times with outstanding results, it has also received numerous awards. The A7 quickly gained mass appeal, praised in many of the worldʼs largest internet forums. Still today, the A7 are the reference monitors in many smaller studios. With the A7X, ADAM Audio proudly presents the evolution of a legend. It takes everything that made the A7 such an outstanding speaker to a new level. Driver technology The first aspect that distinguishes the old from the new model is the X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has a higher efficiency and higher maximum sound pressure levels. The perfect integration with the lower frequencies has been achieved with a newly designed 7” midwoofer. It has been redesigned with a much bigger voice coil (1.5”) and is driven by an amplifier with twice the power compared to its predecessor. This combination produces an amazing sound and pressure levels with an almost distortion-free musical reproduction. Amplifiers / controls Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the midwoofer is being driven by a 100W PWM amp. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch. On the rear panel are several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies. To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors. Mid-Woofer | | Number | 1 | Basket Ø | 7" (175 mm) | Voice coil Ø | 1.5" (38 mm) | Cone material | Carbon/Rohacell/Glass Fiber | Tweeter | | Number | 1 | Type | X-ART | Diaphragm area | 4 inch² (2420 mm²) | Equiv. Diaphragm Ø | 2" (56 mm) | Velocity transform ratio | 4:1 | Diaphragm weight | 0.17 g | Built-in Amplifiers | | Mid-Woofer | 1 | Type | PWM | Amp. power RMS / music | 100 W / 150 W | Tweeter | 1 | Type | A/B | Amp. power RMS / music | 50 W / 75 W | Control panel | | Input Sensitivity | -∞ to +14 dB | High Shelf EQ > 5 kHz | ±6 dB | Low Shelf EQ | ±6 dB | Tweeter gain | ±4 dB | Input connectors | | Analog | XLR / RCA | General data | | Frequency response | 42 Hz - 50 kHz | THD 90dB/1m > 100 Hz | ≤0.5 % | Long term output | ≥106 dB | Max. peak | ≥114 dB | Crossover frequencies | 2500 Hz | Input impedance | 30 KOhm | Weight | 20.3 lb (9,2 kg) | Magnetically shielded | No | Height x Width x Depth | 13.5" (337 mm) x 8" (201 mm) x 11" (280 mm) | Warranty | 5 Years | Delivery contents | Power cord, Manual |
|
Features : Specifications :
Compact and low-profile for minimal obstruction of audience sight-lines.
70°x 70° nominal coverage.
Bi-amplified or full-range passive operation.
Pole socket for applications requiring pole or tripod mounting.
Twelve M10 suspension points.
High power handling, low distortion Vented Gap Cooling™ LF driver.
3 in. (diaphragm) neodymium magnet compression driver.
Rugged DuraFlex™ coated enclosures sized to be truck pack friendly.
14-Gauge steel grille lined with acoustically transparent cloth.
Frequency Range ( –10 dB) : 41 Hz-20 kHz
Frequency Response (± 3 dB) : 55 Hz-20 kHz
Coverage Pattern : 70˚ × 70˚ nominal
Sensitivity (1W/1m) : 96 dB
Power Rating
(Cont. Pink Noise/Program/Peak) : 800 W / 1600 W / 3200 W
(Continuous/Program/Peak)
Rated Maximum SPL : 131 dB SPL Peak
Nominal Impedance : 8Ω
Input Connectors : Two NL4
Operational Modes : Full Range/Bi-Amp
Dimensions (H x W x D) : 721 mm x 436 mm x 329 mm
(28.4" x 17.2" x 13.0“)
Net Weight : 26 kg (58 lbs
|
Color Black Input Connections Parallel Neutrik® NL4 Speaker Type Fullrange Frequency Response (-3 dB) 65 - 20000 Hz Frequency Response (-10 dB) 45 - 20000 Hz Internal Crossover Yes Recommended High-Pass Frequency 45 Hz Sensitivity 1 W/1 m 100 dB Max. SPL/1m (calc) 133 dB Coverage (Nominal -6 dB) H° 90 ° Coverage (Nominal -6 dB) V° 50 ° Rotatable Horn No System Power Handling (Continuous/Program/Peak) 500 Watts LF Transducer SMX2151 HF Transducer DH3 Crossover Frequency 1750 Hz Nominal Impedance (Passive) 8 Ω Minimum Impedance 6.2 Ω Enclosure Material Plywood and MDF with EVCOAT Flying No Height 475 mm (18.7“) Width 439 mm (17.28“) Depth 655 mm (25.79“) Weight Net 23.5 kg (51.81 lbs) |
Reviews
There are no reviews yet.