ELECTRO VOICE ZLX12P ACTIVE LOUDSPEAKER 1000W

The compact, lightweight ZLX-12P was designed to give you power and performance beyond the scope of other small-format loudspeakers, making it a standout choice for smaller-venue sound reinforcement or stage-monitoring. Pound for pound, no other similarly sized composite box comes close.

• 1000 W (Class D); 126 dB max SPL; 50 Hz – 20 kHz
• 12" woofer and 1.5" high-frequency titanium compression driver
• 34.3 lbs (15.6 kg)

The tops of the LDBLOCKX Power Tower are fitted with 12" custom made midrange speakers and a 1" Celestion Driver, they are driven by a 450 W RMS Bi-Amp amplifier producing a maximum sound pressure level of 128 dB.

• Model Name: LDATOP12
• Type: Bassreflex
• Components:
  • Woofer: 12" Custom Made
  • Compression Driver: 1" Custom Made
  • Amplification: Class A / B (Bi-Amp)
• Dispersion: 60° x 40°
• Power (RMS): 350 W + 100 W
• Frequency Range: 80 Hz - 20 kHz
• SPL (1 W/ 1 m): 101 dB
• Max SPL: 128 dB
• Protection: Limiter, Thermal, DC, Short circuit, HF
• Controls: Main Volume, Tweeter Volume, switchable High Pass (80 / 120 Hz), On/Off Switch
• Indicators: Power, Limiter, Signal, Protect
• Connectors:
  • Input: Line: XLR + Jack 6,3mm (Combo)
  • Output: Line: XLR
• Power Supply: Transformer
• Cabinet Material: 15 mm Plywood
• Cabinet Surface: Painting
• Dimensions (W x H x D): 450 x 500 x 520 mm
• Features: Ergonomic milled handles

Features

    400 Watt digital bi-amplification
    127 dB max spl
    Wide dispersion 90 x 60 constant directivity horn
    12" High power woofer, 2.5" voice coil
    1" Mylar dome, high frequency driver
    DSP processing, boost eq, soft limiter and protection
    Xlr/jack input, xlr signal output

Acoustical Specifications

    Frequency Response -3 dB: 50 Hz ÷ 20 kHz
    Max SPL: 127 dB
    Horizontal coverage angle: 90°
    Vertical coverage angle: 60°
    Compression Driver: 1" 1.4" voice coil
    Woofer: 12" 2.5" voice coil

Input/Output Section

    Input signal: bal/unbal
    Input connectors: xlr-jack
    Output connectors: xlr

Processor Section

    Crossover frequencies: 1800 Hz
    Limiter: Fast limiter, RMS limiter
    Controls: Flat, Boost

Amplifier Specifications

    Total power: 400 W
    High frequencies: 100 W
    Low frequencies: 300 W

Cabinet

    Cabinet Material: Composite PP
    Hardware: 2 x M10 flying points
    Handles: 1 on top, 2 on sides
    Pole Mount/Cap: yes
    Grille: steel
    Colour: Anthracite grey

Physical Specifications

    Height: 637/25 mm/inch
    Width: 384/15.11 mm/inch
    Depth: 363/14.2 mm/inch
    Net Weight: 17.2/37.91 kg/lbs

Key Features:
- Compact Powered bi-amplified
full-range loudspeaker with JBL
DrivePack® technology for portable or
installed use
- Optimized for both portable/rental or
permanent-venue use
- 1750 watts peak output power,
875 watts continuous
- 15-inch Differential Drive® lowfrequency
driver for extended lowfrequency
output
- Robust powder-coated die cast
aluminum handles, designed for
strength and comfort
- Integrated 35 mm stand mount

Specifications:
Frequency Response (+/-3 dB): 60 Hz - 18 kHz80 Hz – 20 kHz
Frequency Range (-10 dB): 45 Hz - 20 kHz50 Hz – 20 kHz
Coverage Pattern: 90° x 50°
Directivity Factor (Q): 12.6
Directivity Index (DI): 11 dB
Maximum Peak Output1: 135 dB SPL 1m
Transducer Section:
Low Frequency Section: JBL 2265FF, 381 mm (15 in) dia., 76 mm (3 in) Dual Coil
neodymium Differential Drive®, Direct Cooled
Bandpass Nominal Impedance: 2 x 2 ohms
High Frequency: JBL 2452H-SL, 100 mm (4 in) titanium damped
diaphragm, 1.5 in. exit.
Bandpass Nominal Impedance: 8 ohms
System:
DPC1 Internal Amplification Output
(at nominal load) 1750 Watts Peak, 875 Watts Continuous
DPC1 Output (Continuous IEC shaped
pink noise into rated load impedance): 750LF/125HF Watts
DPC1 Output Section: LF: Dual Bridged Technology™, Class D
HF: Bridged Class D
Audio Input connector XLR with loop-through
User Controls: 80 Hz Subwoofer High Pass Filter. Enable/Disable
0-16 dB input Attenuator with 32 precision 0.5 dB steps
Signal Processing: DSP based, resident in Input Module.
System Management: DSP based limiters for mechanical and thermal
protection
AC Power Operating Range: 90-132 VAC/216-264 VAC, 50/60 Hz
AC Line Voltage: 50/60 Hz; User Selectable; 120V/240V (-15%, +10%)
AC Input Connector: Neutrik PowerCon (NAC 3MPA)
AC Loop-thru: Neutrik PowerCon (NAC 3MPB)
AC Current Requirement: 6A per system at 120V, 3A per system at 240V
Enclosure:
Box Construction: 5/8 in. multi-ply exterior grade Baltic birch. Internally
braced. Black DuraFlex™ finish.
Suspension System: 13 M10 Fittings, 35 mm pole mount socket
Grille: 14 Gauge Black powder-coated perforated steel with
foam backing.
Dimensions (H x W x D): 613 x 434 x 359 mm
24.1 x 17.1 x 14.1 in
Net Weight: 24.7 kg (55 lb)

Specification     Detail
Powered     Yes
Power Configuration     Bi-amped
LF Driver Size     12“
LF Driver Power Amp     500W Class D
HF Driver Size     1.75“
HF Driver Power Amp     100W Class D
Frequency Range     55Hz-20kHz (-10dB)
Crossover Frequency     1.5kHz
Maximum Peak SPL     124dB
Horizontal Coverage Angle     90 Degrees
Vertical Coverage Angle     50 Degrees
Enclosure Material     15mm Birch Plywood
Mounting Options     Pole, Fly, Wedge
Inputs     1 x XLR
Outputs     1 x XLR
Height     24“
Width     15.2“
Depth     15“
Weight     50 lbs.