Content |
The compact, lightweight ZLX-12P was designed to give you power and performance beyond the scope of other small-format loudspeakers, making it a standout choice for smaller-venue sound reinforcement or stage-monitoring. Pound for pound, no other similarly sized composite box comes close.
- 1000 W (Class D); 126 dB max SPL; 50 Hz – 20 kHz
- 12" woofer and 1.5" high-frequency titanium compression driver
- 34.3 lbs (15.6 kg)
|
The DBR12 represents a perfect balance of size and performance, with 1000W of power and outstanding resolution at any output level. Ideal for front-of-house, floor monitoring applications or even the stage side fills, the DBR12 is an ideal choice for a wide range of applications. |
Key Features:
- Compact Powered bi-amplified
full-range loudspeaker with JBL
DrivePack® technology for portable or
installed use
- Optimized for both portable/rental or
permanent-venue use
- 1750 watts peak output power,
875 watts continuous
- 12-inch Differential Drive® lowfrequency
driver for extended lowfrequency
output
- Robust powder-coated die cast
aluminum handles, designed for
strength and comfort
- Integrated 35 mm stand mount
Specifications:
Frequency Response (+/-3 dB): 65 Hz - 18 kHz80 Hz – 20 kHz
Frequency Range (-10 dB): 55 Hz - 20 kHz50 Hz – 20 kHz
Coverage Pattern: 90° x 50°
Directivity Factor (Q): 12.6
Directivity Index (DI): 11 dB
Maximum Peak Output1: 134 dB SPL 1m
Transducer Section:
Low Frequency Section: JBL 2262FF, 304 mm (12 in) dia., 76 mm (3 in) Dual Coil
neodymium Differential Drive®, Direct Cooled
Bandpass Nominal Impedance: 2 x 2 ohms
High Frequency: JBL 2452H-SL, 100 mm (4 in) titanium damped
diaphragm, 1.5 in. exit.
Bandpass Nominal Impedance: 8 ohms
System:
DPC1 Internal Amplification Output
(at nominal load) 1750 Watts Peak, 875 Watts Continuous
DPC1 Output (Continuous IEC shaped
pink noise into rated load impedance): 750LF/125HF Watts
DPC1 Output Section: LF: Dual Bridged Technology™, Class D
HF: Bridged Class D
Audio Input connector XLR with loop-through
User Controls: 80 Hz Subwoofer High Pass Filter. Enable/Disable
0-16 dB input Attenuator with 32 precision 0.5 dB steps
Signal Processing: DSP based, resident in Input Module.
System Management: DSP based limiters for mechanical and thermal
protection
AC Power Operating Range: 90-132 VAC/216-264 VAC, 50/60 Hz
AC Line Voltage: 50/60 Hz; User Selectable; 120V/240V (-15%, +10%)
AC Input Connector: Neutrik PowerCon (NAC 3MPA)
AC Loop-thru: Neutrik PowerCon (NAC 3MPB)
AC Current Requirement: 6A per system at 120V, 3A per system at 240V
Enclosure:
Box Construction: 5/8 in. multi-ply exterior grade Baltic birch. Internally
braced. Black DuraFlex™ finish.
Suspension System: 9 M10 Fittings + 2 M6 Fittings, 35 mm pole mount
socket
Grille: 14 Gauge Black powder-coated perforated steel with
foam backing.
Dimensions (H x W x D): 533 x 358 x 334 mm
21.0 x 14.1 x 13.1 in
Net Weight: 21.3 kg (47 lb)
|
Dimensions (H x W x D) 620 x 394 x 330 mm (24.4 x 15.5 x 13“)
Net Weight 20.5 kg (45.1 lbs)
Components 1 x 12" (305 mm) LF driver, 1 x 1" (25 mm) HF compression driver
Frequency Response 50 Hz - 18 kHz ±3 dB
Dispersion 90° H x 60° V @ -6 dB points
Calculated Max SPL 128 dB peak
Construction Injection-moulded polypropylene enclosure. Recessed carrying handles. Integral dual-angle pole mount socket
Grille Powder coated galvanised perforated steel mesh with foam backing
Connectors
Mic/Line input: combo jack/female XLR wired pin 2 hot
Mix out: male XLR wired pin 2 hot
IEC mains connector with integrated fuseholder with integrated fuseholder
Rigging (6) M10 threaded internal rigging points
Spares & Accessories LS-1229 12" (305 mm) Replacement LF loudspeaker
RC-1229 Recone kit
CD-125 1" (25 mm) HF compression driver
RD-125 HF diaphragm
MG-M12 Metal grille
PB-55 Wall bracket, pole mount fixing
EB-10 Shoulder eyebolt
|
- 2000W power via ultra-efficient Class-D amplification
- TruSourceTM Technology
- Mackie designed, vertically-aligned, common-magnet TruSource driver
- 12″ LF woofer / 1.75″ HF compression driver
- Incredibly compact, lightweight design
- Powerful TruSource DSP delivers seamless clarity, consistent coverage and unmatched fidelity
- DL2 Integrated Digital Mixer
- Powerful, one-touch digital mixer with bright OLED screen
- Two highly-versatile input channels with FX
- Independent channel level, 3-band EQ and effects control
- 16 great-sounding channel effects include reverb, chorus and delay
- XLR/TRS combo and dual RCA connectors
- Handles mic, line, stereo and instrument signals
- Unmatched system control for professional applications
- Multi-band feedback destroyer
- Six speaker modes deliver the perfect voicing for your application
- Alignment delay up to 300ms for delay stack, balcony, etc.
- Three memory locations for instant venue setting recall
- Smart Protect DSP dynamically protects amp/driver
- Innovative ultra-compact design
- 1/3 smaller than a traditional 2-way
- Fit an entire DLM system in nearly any car
- Stack them up for storage
- Pole-mountable on tripod or atop DLM12S using SPM300 speaker pole
- Flyable via standard M10 rigging hardware
- Wall-mount them using SWM300 articulated arm for stealthy, powerful install system
- Roadworthy PC-ABS cabinet with pro black finish and ergonomic top carry handle
- Rugged, powder-coated 20 gauge steel grille
- Integrated kickstand delivers perfect angle for personal monitor use
- Ridiculously lightweight (31 lbs. / 14.1 kg)
|
Specification Detail
Powered Yes
Power Configuration Bi-amped
LF Driver Size 12“
LF Driver Power Amp 500W Class D
HF Driver Size 1.75“
HF Driver Power Amp 500W Class D
Frequency Range 50Hz-20kHz (-10dB)
Crossover Frequency 2kHz
Maximum Peak SPL 131dB
Horizontal Coverage Angle 75 Degrees Axisymmetric
Vertical Coverage Angle 75 Degrees Axisymmetric
Enclosure Material 15mm Birch Plywood
Mounting Options Pole, Floor Wedge, Fly
Inputs 1 x Combo (XLR/TRS, Mic/Line), 1 x Combo (XLR/TRS, Line), 2 x RCA
Outputs 2 x XLR (Direct), 1 x XLR (Line)
Height 26“
Width 15“
Depth 15.4“
Weight 49 lbs.
Manufacturer Part Number KW122
|
Reviews
There are no reviews yet.