Small Signal Parameters
| D (m/in) | 0.33/12.99 |
| Fs (Hz) | 39 |
| Mmt (g/oz) | - |
| Mmd (g/oz) | 70.00/2.47 |
| Mair | 14.149/0.499 |
| Qms | 7.10 |
| Qes | 0.38 |
| Qts | 0.36 |
| Re (Ω) | 6.50 |
| Vas (lt/ft3) | 208.0/7.34 |
| BI (Tm) | 18.70 |
| Cms (mm/N) | 0.20 |
| Rms (kg/s) | 2.86 |
| Le (mH) | 0.59 |
Mounting Information
| Overall diameter (mm/in) | 385/15.16 |
| Overall depth (mm/in) | 158/6.22 |
| Cut-out diameter (mm/in) | 351/13.82 |
| Mounting slot dimensions (mm/in) | 7 x 10/0.28 x 0.39 |
| Number of mounting slots | 8 |
| Mounting slot PCD range (mm/in) | 365-375/14.37-14.76 |
| Unit weight (kg/lb) | 6.3/13.8 |
Packed Dimensions and Weight
| Single pack size W x D x H (mm/in) | 435 x 435 x 200/17.1 x 17.1 x 7.9 |
| Single pack weight (kg/lb) | 7.7/17.0 |
| Multipack (36) size W x D x H (mm/in) | 1200 x 1000 x 980/47.2 x 39.4 x 38.6 |
| Multipack (36) weight (kg/lb) | 278/613 |
The high power handling and robust construction of the 2226H make it a natural for tour sound and fixed sound reinforcement use, while the low distortion and smooth response make it an ideal choice for critical high level monitoring applications.
To increase power handling while reducing power compression, JBL engineers created a unique, direct voice coil-to-air heat dissipation method called Vented Gap Cooling. This process pumps air through the magnetic gap and directly over and around the voice coil to provide immediate heat transfer and reduction in operating temperature—a direct improvement in power compression.
The 2226H incorporates a SFG (Symmetrical Field Geometry) magnetic structure. Computer-aided magnet optimization and analysis allowed JBL engineers to optimize magnet weight, flux density and reduced distortion. This patented magnet structure offers much of the weight advantage of rare earth magnet structures without their higher cost.
JBL 2226H 15" Low Frequency Transducer Specifications:
- Nominal Diameter : 15" (380 mm)
- Rated Impedance : 8ohms
- Power Capacity : 600W AES continuous pink noise
- Sensitivity : 97dB SPL, 1W, 1m (3.3 ft)
- Frequency Range : 30Hz-2.5kHz
- Power Compression - at —10 dB power (60 W) : 0.7dB
- Power Compression - at —3 dB power (300 W) : 2.5dB
- Power Compression - at rated power (600 W) : 4.0dB
- Distortion - 2nd harmonic :
| Recommended for professional audio as a mid-bass or floor monitor in a sealed enclosure. Also suitable as a woofer in vented, bass guitar or PA enclosures.
Product type
Loudspeaker Chassis
Type
PA
Nominal Diameter
15 "
Nominal Diameter
381 mm
Voice Coil
2.5 "
Voice Coil
63.5 mm
Overall diameter
384.8 mm
Pitch Circle Diameter
369.9 mm
Cut- out Measurement
352.3 mm
Diameter of fixing holes
6.4 mm
Depth
160 mm
Nominal Impedance
8 Ohm(s)
Nominal Load Capacity
500 W
maximum rated load
1000 W
Sensitivity (1 W / 1 m)
96 dB
Frequency response
42 - 3200 Hz
Voice Coil Material
copper
Magnet
Ferrite
Depth of the magnetic gap
9.53 mm
Thiele & Small Parameter
Fs (Resonance Frequency)
39 Hz
Re (DC resistance)
6.11 Ohm(s)
Qms (mechanical quality)
6.3
Le (inductance of the voice coil)
1.37 mH
Qes (electrical quality)
0.52
Qts (overall quality)
0.48
Vas (equivalent volume)
241
Mms (moving mass)
75 g
BL (power factor)
14.6 T/m
Xmax (maximum displacement)
4.8 mm
Cms (elasticity of the suspension)
0.23 mm/N
Sd (membrane area)
873 cm²
Weight
6,449 kg | KAPPA-15A American Standard Series
Recommended for professional audio in a vented mid-bass or bass enclosure. Also suitable for bass guitar.
SPECIFICATION
- Nominal Basket Diameter 15“, 381 mm
- Nominal Impedance 16 ohms
- Power Rating Watts 450 W / Music Program 900 W
- Resonance 33 Hz
- Usable Frequency Range 52 Hz - 2.3 kHz
- Sensitivity 100.5
- Magnet Weight 80 oz.
- Gap Height 0.375“, 9.53 mm
- Voice Coil Diameter 3“, 76.2 mm
THIELE & Small Parameters
- Resonant Frequency (fs) 33 Hz
- DC Resistance (Re) 5.22
- Coil Inductance (Le) 1.05 mH
- Mechanical Q (Qms) 8.90
- Electromagnetic Q (Qes) 0.33
- Total Q (Qts) 0.32
- Compliance Equivalent Volume (Vas) 321.3 liters / 11.35 cu. ft.
- Peak Diaphragm Displacement Volume (Vd) 343 cc
- Mechanical Compliance of Suspension (Cms) 0.31 mm/N
- BL Product (BL) 15.7 T-M
- Diaphragm Mass inc. Airload (Mms) 76 grams
- Efficiency Bandwidth Product (EBP) 98
- Maximum Linear Excursion (Xmax) 4.0 mm
- Surface Area of Cone (Sd) 856.3 cm²
- Maximum Mechanical Limit (Xlim) 11.6 mm
MOUNTING Information
- Recommended Enclosure Volume
Sealed N/A
Vented 45-113 liters/1.6-4 cu.ft.
- Overall Diameter 15.16“, 384.9 mm
- Baffle Hole Diameter 13.77“, 349.6 mm
- Front Sealing Gasket fitted as standard
- Rear Sealing Gasket fitted as standard
- Mounting Holes Diameter 0.25“, 6.4 mm
- Mounting Holes B.C.D. 14.56“, 369.9 mm
- Depth 6.13“, 156 mm
MATERIALS of Construction
- Copper voice coil
- Polyimide former
- Ferrite magnet
- Vented core
- Pressed steel basket
- Paper Cone
- Cloth cone edge
- Solid composition paper dust cap
|
| 1200 W continuous program power capacity |
|
| 76 mm (3 in) copper voice coil |
|
| 40 – 2000 Hz response |
|
| 100.5 dB sensitivity |
|
| Aluminium demodulating ring allows a very low distortion figure |
|
| Neodymium ring magnet allows a very high force factor and linear excursion |
|
| Double silicone spider with optimized compliance |
|
| Ventilated voice coil gap for reduced power compression |
| | Weight | 3.60 kg | 6.30 kg | 10.00 kg | 6.50 kg | 5.00 kg | 5.60 kg |
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A |
| Additional information |
|
|
|
|
|
|
Reviews
There are no reviews yet.