EMINENCE EG12A Gamma-12 – 12″ Speaker 300 W 8 Ohms

Product type Loudspeaker Chassis

Long excursion 12" woofer with 800W power handling for
subwoofer application. A special 3" copper voice coil using
proprietary high temperature adhesives and an optimized
magnet assembly guarantees superb LF dynamic range with a
very low distortion. Due to the linear characteristics of the 12
PZ 32, exceptional results are obtained in horn loaded
subwoofer applications.

Specifications
Nominal Diameter 320 mm (12 in)
Nominal Impedance 8 Ω
Minumum Impedance 7.8 Ω
Power Handling
(70 –700 Hz)
Nominal1 400 W
Continuous Program2 800 W
Sensitivity (1W/1m)3 95 dB
Frequency Range 40-2500 Hz
Voice Coil Diameter 76 mm (3 in)
Winding Material Copper
Former Material Glass Fibre
Winding Depth 22 mm (7/8 in)
Magnetic Gap Depth 10 mm (3/8 in)
Flux Density 1.1 T
Also available in 4 Ω, data upon request

Thiele & Small Parameters4
Fs 38 Hz
Re 6.2 Ω
Qes 0.2
Qms 5.9
Qts 0.19
Vas 102 dm3 (3.6 ft3)
Sd 522 cm2 (80.9 in2)
η0 2.7%
X max ± 5.5 mm
X var ± 5.5 mm
Mms 64 g
Bl 21.7 T·m
Le 2.7 mH

Mounting and Shipping Information
Overall Diameter 316 mm (12.4 in)
Bolt Circle Diameter 296 mm (11.6 in)
Baffle Cutout Diameter 282 mm (11.1 in)
Depth 134 mm (5.3 in)
Flange and Gasket Thickness 16 mm (5/8 in)
Net Weight 7.6 kg (16.7 lb)
Shipping Weight 8.5 kg (18.7 lb)
Shipping Box 380x380x170 mm
(15x15x6.7 in)
1 2 hours test made with continuous pink noise signal (6 dB crest factor) within the
specified range. Power calculated on rated minimum impedance. Loudspeaker in
free air.
2 Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
3 Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance. Average
SPL from 200 to 2500 Hz.
4 Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning
test.

• 98 dB sensitivity 1 W / 1 m
• 500 W + 80 W Power Handling
• 3" Copper Sandwich voice Coil
• Triple Aluminum Demodulating Rings
• Single Point Source providing coherent Wave Front
• Very high SPL, superb Quality Sound
• Optimal for compact 2-way Systems

• 98 dB sensitivity 1 W / 1 m
• 400 W + 60 W Power Handling
• 3" + 1.5" Copper Clad Sandwich Voice Coil
• Single Point Source providing coherent Wave Front
• Optical for compact 2-way Systems

• Nominal Basket Diameter 12", 304.8 mm
• Nominal Impedance 8 ohms
• Power Rating Watts 250 W / Music Program 500 W
• Resonance 47 Hz
• Usable Frequency Range 43 Hz - 3.8 kHz
• Sensitivity 98
• Magnet Weight 38 oz.
• Gap Height 0.312", 7.92 mm
• Voice Coil Diameter 2", 50.8 mm

• Resonant Frequency (fs) 47 Hz
• DC Resistance (Re) 5.0
• Coil Inductance (Le) 0.64 mH
• Mechanical Q (Qms) 6.00
• Electromagnetic Q (Qes) 0.50
• Total Q (Qts) 0.46
• Compliance Equivalent Volume (Vas) 120.1 liters / 4.2 cu. ft.
• Peak Diaphragm Displacement Volume (Vd) 237 cc
• Mechanical Compliance of Suspension (Cms) 0.29 mm/N
• BL Product (BL) 10.8 T-M
• Diaphragm Mass inc. Airload (Mms) 40 grams
• Efficiency Bandwidth Product (EBP) 94
• Maximum Linear Excursion (Xmax) 4.4 mm
• Surface Area of Cone (Sd) 538.9 cm²
• Maximum Mechanical Limit (Xlim) 11 mm

• Recommended Enclosure Volume Sealed 25.5-35.4 liters, 0.9-1.25 cu.ft. Vented 36.8-139 liters/1.3-4.9 cu.ft.
• Overall Diameter 12.03", 305.5 mm
• Baffle Hole Diameter 10.95", 278.1 mm
• Front Sealing Gasket standard fitted as standard
• Rear Sealing Gasket standard fitted as standard
• Mounting Holes Diameter 0.25", 6.4 mm
• Mounting Holes B.C.D. 11.59", 294.3 mm
• Depth 4.57", 116 mm

• Copper voice coil
• Polyimide former
• Ferrite magnet
• Vented and extended core
• Pressed steel basket
• Paper Cone
• Cloth cone edge
• Solid composition paper dust cap