| Content | The dbx 520 will help you expertly tame the excessive sibilance often found in vocals and other high frequency dense material. Based upon the legendary dbx 902, the dbx 520’s unique features make it possible to achieve an exact amount of de-essing regardless of variations in signal levels. The 520 allows you to create brilliant, crisp vocals without sibilance!
With its modular 500 Series based design, the dbx 520 examines the differences in dB between the high frequency and full-bandwidth portions of a signal, allowing de-essing of signals which change in level by as much as 60dB. It features a Frequency Control with range from 800Hz to 8kHz, Gain Reduction Metering and a De-essing Amount Range from 0dB to 20dB.
Control vocals, drums, percussive instruments and problematic material/reverb combinations with the dbx 520! | WDR 24 is a wireless receiver in the operating free band ISM 2.4 GHz, which has been designed to work with the transmitter WDT 24, creating a digital audio wireless system.
The transmitter WDT 24 can work with one receiver, or with up to 10 receivers WDR 24, covering a distance of more than 30 metres in open places.
- Wireless Digital Audio Receiver System
- Operating Band ISM 2.4GHz (free band).
- One transmitter WDT 24 paired with one receiver WDR 24, or one transmitter WDT 24 paired with up to ten receivers WDR 24.
- GFSK digital modulation/demodulation.
- External antenna can help to increase the transmission distance.
- Intelligent Frequency Hoping can help to avoid interference effectively and to ensure the channel quality.
- Automatic mute in bad channel quality conditions or high error code rate.
- Transmission distance higher than 30 meters in open places.
- Up to three transmitters WDT 24 in a zone
- Balanced XLR and unbalanced ¼\'\' jack outputs
- Working mode: stereo or mono
| Power Supply |
AC 9V-500 mA 50/60 Hz |
| Frequency |
2404-2476MHz |
| Channel |
25 |
| Modulation/Demodulation |
GFSK |
| Receive Sensitivity (WDR 24) |
-84dBm (min.) |
| Transmitted Power (WDT 24) |
6 dBm |
| Output Level (WDR 24) |
+13dBu (BAL max.) |
| Input Level (WDT 24) |
+5dBu (max.) |
| Bandwidth |
>=1.8 MHz |
| Frequency Response |
20Hz - 20kHz, +3dB / -3dB |
| S/N |
>80 dB |
| Dynamic Range @ 1 kHz |
>90 dB |
| Crosstalk @ 1kHz |
>90 dB |
| THD |
|
|
Overview
Dial in YOUR mix exactly as YOU want it, in Real Time.
The PMC16 is a 16 channel personal monitor controller which allows the user to create a custom mix from 16 channels of audio. Designed to be used with the dbx TR1616 or any other BLU link compatible device, the PMC16 allows for monitoring with headphones, in-ear monitors, powered monitors, or traditional wedge monitors. Multiple PMC16s can be daisy chained using CAT5e cable allowing each user to receive 16 channels of high-resolution digital audio and create their own personalized mix to suit their monitoring needs. The PMC16 comprises a 16 channel mixer section with full control of levels, panning, effect send levels, muting, and soloing. Onboard Lexicon© reverb provides the finishing touch. The PMC16ʼs output processing section includes: stereo width control, wedge monitor compensation EQ, high and low master EQ, master level control, and dbx limiting. With a Setup Wizard for ease of configuration, full 16 channel level metering, channel grouping, 16 preset locations for future recall of configurations and mixes, and an intuitive yet powerful user interface, PMC16 gives you the power to dial in YOUR mix exactly as YOU want it, in real time.
Recommended for: Portable, Tour.
Features
- 16 Channel Monitor Mixer with Level, Pan, Mute, Solo, & Reverb Send Control
- 16 Preset Locations for Mix & Configuration Recall
- LCD Display with 16 Channel Metering
- Built-In Lexicon© Reverb
- dbx PeakStopPlus™ Limiting
- Global High & Low EQ
- Global Master Level Control
- Global Stereo Width Control
- BLU Link High Bandwidth, Fault Tolerant Digital Audio Bus
- XLR & 1/4” Stereo or Mono Outputs
- 1/8” & 1/4” Headphone Outputs
- Setup Wizard for Easy Configuration
- Supports 48 kHz & 96 kHz Sampling Rates
- Channel Linking, Grouping, & Multi-Select Capabilities
- Supports up to 60 PMC16s on a Single BLU Link Ring
- Built-In Sturdy Mic Stand Mount
- USB Port for Firmware Updates
|
The dbx 580 Microphone Preamp is the perfect partner to your microphones, providing sonically-transparent gain that will reveal the detail and audio signature of even the most esoteric microphones. It will transform their low level output signal to a high level, high current output for direct connection to the line level inputs of your mixer, sampler or any other recording medium that accepts line level, analog input. |
Product Features:
16-channel digital stereo mixer to create your personal monitor mix
Ultra-intuitive \"analog\" operation with total recall and 16 presets for custom mixes
State-of-the-art 24-bit D/A converters for premium audio quality
16 Channel Select buttons with dual LEDs for perfect overview
Level and Pan/Spread control per channel with LED meter
3-band EQ per channel with mid-band frequency control
Solo and Mute functions per channel
Global Level and EQ controls plus Panic Mute function
High power and \"drummer proof\" headphones output
Fully adjustable limiter protects your ears and headphones
Additional mono/stereo line output to connect your powered monitor
MIDI IN port for real-time remote control of all channels by external MIDI device such as BEHRINGER BCF2000, BCR2000, etc.
Standard CAT5e connection delivers power and 16 signals to each Personal Mixers
ULTRANET connector to daisy-chain up to forty-eight P16-M mixers for large systems (in conjunction with P16-D)
Ultra-low system latency of less than 1 millisecond
Powered via external power supply (included) or P16-I / P16-D
Mounts easily on a mic stand with the P16-MB mic stand mount (not included)
Extremely rugged construction ensures long life even under the most demanding conditions
Conceived and designed by BEHRINGER Germany
User\'s Manual |
For decades, dbx’s patented Subharmonic Synthesis has rattled foundations enhancing the bass in a variety of professional applications including nightclub and DJ mixing, theatre and film sound, music recording, live music performance and broadcasting. dbx’s Subharmonic Synthesis process actually produces a new, Waveform Modeled bass note, exactly an octave below the bass in the original audio.
The dbx 510 answers the call of audio professionals everywhere delivering Subharmonic Synthesis in the convenient design of a 500 Series module. The 510’s two separate bands of subharmonic synthesis provide the best combination of smoothness and control, while the independent Low Frequency Boost circuit is designed to get the most out of high-performance, low frequency speaker systems. Unlike other attempts at bass synthesis, the dbx process produces musical low frequencies that don’t interfere with mid and high-band information, even when the maximum synthesis and boost are applied. The result is a low-end punch that people really feel!
Put some boom in your room with the dbx 510! |
Reviews
There are no reviews yet.