Content |
The Second generation of an International Best Seller
Evolving from the FBT EvoMaxX Series of loudspeakers, FBT Evo2MaxX speakers feature totally new Digital Sound Processing resulting in improved sound quality and SPL, especially in bass reproduction at high volume. The sound is more relaxing and natural and the four new DSP presets provide quick dynamic equalization and protection contours for any acoustically challenging venue. Other exciting features are high efficiency and excursion woofers, powerful Class D amplifiers with an extremely low noise floor.
Alongside these key performance improvements, FBT has been inspired to develop the Evo2MaxX Series by one very important goal – offering the customer more value for money. Evo2MaxX lightweight yet sturdy polypropylene cabinets feature a monitor taper designed to ensure that they perform with excellence no matter whether they are used at front of house for a main sound system, as stage floor monitors or within permanent installations.
Additional options are also available for extending low frequency response in the shape of the 15” subwoofer Evo2MaxX 9Sa or the SUBLine 12Sa, 15Sa and 18Sa, all of which boast birch plywood enclosures with 12”, 15” band-pass and 18” reflex designs respectively.
- Sturdy, gas-injected polypropylene molded enclosures, engineered to contain undesired resonance.
- High efficiency loudspeakers custom made for FBT with a weather resistant coating, allowing use in covered outdoor applications.
- B&C HF compression drivers.
- Latest Class D, 400W LF and 100W HF power amplifiers with high efficiency switch mode power supplies. These amplifiers boast an extremely lightweight design with passively cooled circuitry, meaning no noisy fans!
- New digital signal processor with dynamic equalizations and sophisticated dynamic limiters four improve sound quality and SPL granting reliable and distortion-free audio reproduction
- New 4 DSP presets for improved versatility and ease of use
- Premium sound quality as results of extensive listening test
- High SPL thanks to FBT’s new digital limiter algorithms and high power class D amplifier
- Ergonomic carrying handles, M10 fly points, a top-hat speaker stand socket and a stage monitor taper – all included to ensure superb versatility for live sound events and permanent installations.
Perhaps best of all the fact that Evo2MaxX owners can enjoy four loudspeakers in one thanks to FBT’s New four factory DSP presets. The result of hundreds of hours of development time in FBT’s dedicated R&D facility, the presets optimize the EvoMaxX range to accommodate a vast range of applications.
400W + 100W RMS 130dB SPL Processed Active Speaker
- 2-way, bi-amplified, bass reflex design cabinet
- 380mm (15”) LF woofer with 64mm (2.5”) voice coil, custom made for FBT
- 25mm (1”) exit throat B&C HF compression driver with 44mm (1.7’’) voice coil
- Frequency response from 42Hz to 20 kHz
- Biamped: 400w RMS LF, 100w RMS HF, Class D power amplifiers with switch mode power supplies
- Digital Signal Processor with 4 Equalization Presets
- Control Panel: features balanced XLR/Jack input and XLR link out, Volume, EQ Presets, HP Filter, 3 status LED indicators
- 90°H x 60°V Constant Directivity Horn
- Sturdy gas-injected polypropylene molded enclosure with two integrated handles and Stage Floor Monitor taper
- 4 x M10 suspension points, 35mm (1⅜”) top-hat speaker stand socket, wall bracket mount flange plate
- Enclosure suitable for stacking
- Extremely light, Net Wt. only 21kg (46.8 lb)
|
Specifications
- LF Amplifier Power (RMS): 1000 watts
- HF Amplifier Power (RMS): 250 watts
- Frequency Response (-3dB): 58-18000 Hz
- Frequency Response (-10dB): 50-20000 Hz
- Max. SPL/1m (calc); half space: 133 dB
- Coverage (nominal -6dB) Horizontal: 90°
- Coverage (nominal -6dB) Vertical: 50°
- LF Transducer: DVX3150
- HF Transducer: ND2
- Crossover Frequency: 1500 Hz
- Enclosure Material: Polypropylene
- Flying: Yes
- Input Connections: XLR
- Chassis Size: 15“
- Speaker Type: Full-range, powered monitors, poweredspeakers, two-way wedges
- Weight (net): 50.49 lbs
- Dimensions (H x W x D): 27.24" x 17.56" x 16.18“
|
JBL VP7315-64DPAN Powered 15'' 3-way 1100W RMS Loudspeaker System
Key Features : Powered bi-amplified full-range loudspeaker with JBL DrivePack? technology for portable or installed use.
2200 Watts peak output power, 1100 Watts continuous.
HiQnet? compatible; network control.
15-inch Differential Drive? low-frequency driver for extended low-frequency output.
60° x 40°coverage.
Stylized and ergonomically designed powder-coated die cast aluminum handles.
Six 3-inch fly track suspension points and fourteen M10 fittings (optional detachable flying fittings and forged eye bolt kits available).
Optional DPCN (CobraNet?) digital audio input module available. Specifications:
Frequency Range |
: |
34 Hz to 20 kHz (-10 dB) |
Frequency Response |
: |
43 Hz to 18 kHz ( ± 3 dB) |
Coverage Pattern |
: |
60°x 40° rotatable waveguide |
Directivity Factor (Q) |
: |
15.85 |
Directivity Index (DI) |
: |
12 dB |
Maximum Peak Output1 |
: |
138 dB SPL 1m |
Transducer Section |
|
|
Low Frequency Section |
: |
JBL 2265G, 381mm (15 in) dia., 76mm (3 in) Dual Coil neodymium Differential Drive?, Direct Cooled |
Bandpass Nominal Impedance |
: |
4 ohms |
Mid/High Frequency Section |
: |
|
Mid Frequency |
: |
JBL CMCD-82H, 200mm (8in) Dual Coil Differential? transducer |
High Frequency |
: |
JBL2452H-SL, 100mm (4in) titanium damped diaphragm, 1.5in. exit |
Waveguide |
: |
JBL PT-K64-MHF |
Bandpass Nominal Impedance |
: |
8 ohms
|
System |
|
|
DP2 Internal Amplification Output (at nominal load) |
: |
2200 Watts Peak, 1100 Watts Continuous |
DP2 Output (Continuous IEC shaped pink noise into rated load impedance) |
: |
750LF/350HF Watts |
DP2 Output Section |
: |
2-Channel, Class I |
Audio Input connector: |
: |
XLR with loop-through |
Network Control Connector |
: |
Ethernet, RJ45 |
Signal Processing |
: |
DSP Based, resident in Input Module |
System Management
|
: |
DSP based limiters for mechanical and thermal protection |
AC Power Operating Range |
: |
Auto Select 90-132VAC/ 216-264VAC, 50/60Hz
|
AC Line Voltage |
: |
50/60 Hz, Auto-Detect; 120V/ 240V (-15%, +10%) |
AC Input Connector |
: |
Neutrik PowerCon |
AC Loop-Thru |
: |
Neutrik PowerCon |
AC Current Requirement |
: |
6A per system at 120V, 3A per system at 240V |
Enclosure |
|
|
Box Construction |
: |
5/8in. multi-ply exterior grade Baltic birch. Internally braced. Black DuraFlex? finish.
|
Suspension System |
: |
6 standard air-cargo 3 in. track and 12 M10 fittings
|
Grille |
: |
14 Gauge Black powder-coated perforated steel with foam backing
|
Dimensions (H x W x D) |
: |
914.4 x 528.3 x 624.8mm (36 x 20.8 x 24.6 in) |
Net Weight |
: |
44 kg (97 lb) | |
Specification Detail
Powered Yes
Power Configuration Bi-amped
LF Driver Size 15“
LF Driver Power Amp 500W Class D
HF Driver Size 6.5" (Mid), 1.75" (H)
HF Driver Power Amp 500W Class D (Shared Between Mid and HF)
Frequency Range 35Hz-20kHz (-10dB)
Crossover Frequency 500Hz, 2.1kHz
Maximum Peak SPL 134dB
Horizontal Coverage Angle 75 Degrees Axisymmetric
Vertical Coverage Angle 75 Degrees Axisymmetric
Enclosure Material 15mm Birch Plywood
Mounting Options Pole, Fly
Inputs 1 x Combo (XLR/TRS, Mic/Line), 1 x Combo (XLR/TRS, Line), 2 x RCA
Outputs 2 x XLR (Direct), 1 x XLR (Line)
Height 43.1“
Width 18.5“
Depth 16.8“
Weight 87 lb.
Manufacturer Part Number KW153
|
Quasi 3-Way Active Tri-amplified Speaker System.
SPOT2500T is composed of an active full-range cabinet and a passive bass cabinet.
It is a high directivity, long throw compact systems, characterized by extremely high intelligibility, even at long distances, making it the perfect choice for live applications. This system was designed to simplify the task of assembling clusters by simply placing multiple enclosures side-by-side when wider horizontal dispersion is required.
SPOT 2500T is equipped with class D amplifiers controlled by the Montarbo DSP loudspeaker processor (56 bit, 180 MHz, 24 bit converters) which provides filtering, equalization, delay, limiting and diagnostic functions. This DSP utilizes an advanced algorithm for the real time control of both the power output and the temperature (both internal and external) of the amplifier; it also includes a dedicated standby function which results in reduced power consumption when no signal is present.
5 presets are available, one of which may be customized by the user and loaded into the DSP, thus adapting the speaker's acoustic response to the user's personal taste. The Internal DSP controller also provides an auxiliary output that may be used to drive an external subwoofer, be it equipped with internal filters or not. The presets can be modified by means of the Montarbo proprietary software program RAConLS™ with the LD2.4 USB interface (optional device). The remote control allows: programming and storage of one preset in the DSP and the creation of an unlimited library of personalized settings in the PC; adjustment of the frequency response by means of a 10 filter 'fully parametric' equalizer; adjustment of the delay time and of the output level of each speaker system; monitoring of the power amplifier's status (temperature, protection circuits, limiters and thermal alarms); selection of the type of subwoofer used.
- 3 class-D amplifiers (with switching-mode power supplies) that can supply a total of 2500 Watts EIAJ (1000 + 1000 W for the LF drivers, 500 W for the HF).
- 140 dB max SPL.
- Two 15" woofers (one of which in the passive bass module) with 4" voice coil, featuring a shielded front-mounted neodymium magnet.
- HF driver with a 1.4" throat and a 3" voice coil, featuring a neodymium magnet and titanium diaphragm. - High directivity (50° H x 40° V) wave-guide horn.
- Montarbo 56 bit DSP, 180 MHz, 24 bit converters.
- Dedicated standby function.
- Processed auxiliary output allows to drive an external subwoofer.
- 5 presets one of which may be customized and loaded into the DSP.
- Presets remote control and customization by means of the proprietary software program RAConLS™ and the optional LD2.4 USB interface.
- With a single LD2.4 USB interface it is possible to operate up to 10 speaker systems of the SPOT, WIDE and FULL series.
- The geometry of the cabinet allows for easy construction of clusters. A 3-system cluster results in a 150° horizontal coverage.
- Birch plywood cabinet, finished with anti-abrasion paint.
- Threaded studs (M10) for safe and simple suspension; adapter for coupling bar (SM3, optional); 2 ergonomically designed handles.
APPLICATIONS
- Coverage of large areas.
- Stage-monitoring applications (in-fill system).
- In-house system in theatres and in live-performances venues.
| Features: EVS-18K 18-inch Woofer 123 dB max. SPL 400 W Class-D Amplifier Integrated DSP Cabinet Powered subwoofer 1 x 18“, vented design Maximum Amplifier Output Capability, IHF-A 400 W Amplifier Power RMS 305 W Max. SPL 1m / calc. 123 dB Frequency Range (-10 dB) 40 Hz to 130 Hz Nominal Coverage Angle Omnidirectional Audio Input XLR and 1/4" TRS combination Audio Output (LINK OUTPUT) XLR, balanced Digital Signal Processing 28/56-Bit, 48 kHz Crossover Frequency 100 Hz Product Dimensions (W x H x D) 661 x 507 x 574 mm Net Weight 31.3 kg Optional Accessories --- SH-118A, Dust Cover F01U270397
User's Manual |
Reviews
There are no reviews yet.