FOCAL CMS SUB ACTIVE SUBWOOFER STUDIO MONITOR 300W

The 11" Polyglass® cone woofer used in the CMS SUB is both very light and extremely rigid for a neutral and distortion-free response. This incredible weight-to-rigidity ratio is obtained by applying a thin layer of hollow glass spheres on top of a cellulose-based cone. The high excursion capabilities of the CMS SUB woofer offer tight and controlled bass, able to reproduce even the most minute detail. The CMS SUB woofer was designed to be extremely efficient, to make the most out of amplifier headroom, making sure that you can hear the slightest changes to compression settings.

To hear what's really going on at the bottom of your mixes, you need a subwoofer that speaks the truth. The TemblorTM T10 lets you take charge of the low-frequency foundation of your mix with a combination of quality components and design, plenty of inputs and outputs, and extensive user controls not normally available in this price range.
Main components

• 10-inch glass-composite low-frequency transducer
• Front-firing, bass-reflex acoustic port
  

• Input gain control (-30 dB to +6 dB, continuously variable)
• Continuously variable lowpass filter (50 Hz to 130 Hz)
• Built-in crossover
• Switchable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the T10 outputs to the main monitors
• Momentary footswitch (included) bypasses the subwoofer, highpass filter, and Sub Out
• Polarity invert and ground-lift switch
  

• 250 watt, Class AB amplification
• Internal damping and heat sink
• Integrated, gravity-calibrated rubber feet for stable placement
  

• Left and right, balanced XLR and ¼" TRS and unbalanced RCA main inputs
• Left and right balanced XLR and ¼" TRS outputs 
• XLR subwoofer output for connecting a second T10

The Genelec 7073A active subwoofer is a powerful and precise bass reproduction tool for large Surround Sound or Stereo installations. Its 19 Hz lower cut-off frequency and 124 dB sound pressure output capability are sufficient to handle the most demanding high SPL applications.

All electronics are integrated into the subwoofer cabinet: active crossover filters, driver overload protection circuits and power amplifiers.

The built-in bass management unit has six signal input and output channels (L/C/R Front and L/C/R Rear), LFE input and summed signal output connectors, providing great flexibility and easy connection.

12" Subwoofer

Our range of Subwoofers follows our policy of using only high quality components. This has enabled us to bring the best possible products to the market place. We have paid the highest attention to properly extend the frequency range of our speakers and put even more care into our subwoofer designs. Not only care, but also a lot of testing and abuse.

So you can rest assured that when you buy a TS (ThunderStorm) subwoofer from EVE Audio, you will be getting a first grade product that delivers adequate and precise control over the bass frequencies in your room, without any low-port noise distortion since all TS subwoofers have a passive radiator. Your system will sound as a whole, not just a sum of parts.

All subwoofers feature the powerful accurate and low distortion sound reproduction that is the hallmark of all EVE Audio studio monitors.

Every ThunderStorm subwoofer has detailed controls like switchable satellite filters (full range and 80Hz), phase switch controls (0°, 180°). and variable subwoofer filter frequencies (60....140Hz) to let you tailor and adjust your ThunderStorm to your specific room.

The TS112 is our largest, "no-compromise" subwoofer. The highly efficient PWM amp is capable of 400 W of short term output power. The powerful amp, coupled with a large proprietary 12" woofer will guarantee you a clean frequency response down to 24Hz and up to 300Hz, for a maximum output power of 112 dB (SPL @ 1m). As with the highly efficient TS110, don't let your neighbours see you unloading this subwoofer into your house!

The included remote control will let you adjust not only the subwoofer's volume but also the complete stereo system's volume while sitting comfortably in your sweet spot.

All in all, the ThunderStorm subwoofers will make any system sound better and more complete.

As with every other EVE Audio subwoofer, you get balanced XLR In- and Outputs (Stereo In and Out, LFE In, LFE/Sub Out) for greater convenience.

The particularity of our extremely powerful and accurate subwoofer resides in the passive radiator used that replaces the common bass reflex tube. With this design all audible noise due to air turbulences disappear completely.

Unwanted disturbing pipe resonances (at lambda/2 and multiples) are eliminated, which are unavoidable when applying the principle of a two-sided pipe opening (bass reflex port). The suspension of the passive radiator has a restoring force underneath its tuning frequency and reduces inaudible excursions in the subsonic range. This in turn results in reduced intermodulation distortion in the working range.

The passive radiator allows a particularly low tuning or lower cut-off frequency in a very compact cabinet.

Frequency response curve

10" Subwoofer

Our range of Subwoofers follows our policy of using only high quality components. This has enabled us to bring the best possible products to the market place. We have paid the highest attention to properly extend the frequency range of our speakers and have put even more care into our subwoofer designs. Not only care, but also a lot of testing and abuse.

So you can rest assured that when you buy a TS (ThunderStorm) subwoofer from EVE Audio, you will be getting a first grade product that delivers adequate and precise control over the bass frequencies in your room, without any low-port noise distortion since all TS subwoofers have a passive radiator. Your system will sound as a whole, not just a sum of parts.

All subwoofers feature the powerful accurate and low distortion sound reproduction that is the hallmark of all EVE Audio studio monitors.

Every ThunderStorm subwoofer has detailed controls like switchable satellite filters (full range and 80Hz), phase switch controls (0°, 180°). and variable subwoofer filter frequencies (60....140Hz) to let you tailor and adjust your ThunderStorm to your specific room.

The TS110 model features a very efficient 250W PWM amplifier that drives a proprietary 10" woofer. This guarantees a frequency response of down to 28Hz, up to 300Hz, for a maximum output power of 108 dB (SPL @ 1m) with plenty of power for most needs.

The included remote control will let you adjust not only the subwoofer's volume but also the complete stereo system's volume while sitting comfortably in your sweet spot.

All in all, the ThunderStorm subwoofers will make any system sound better and more complete.

As with every other EVE Audio subwoofer, you get balanced XLR In- and Outputs (Stereo In and Out, LFE In, LFE/Sub Out) for greater convenience.

The particularity of our extremely powerful and accurate subwoofer resides in the passive radiator used that replaces the common bass reflex tube. With this design all audible noise due to air turbulences disappear completely.

Unwanted disturbing pipe resonances (at lambda/2 and multiples) are eliminated, which are unavoidable when applying the principle of a two-sided pipe opening (bass reflex port). The suspension of the passive radiator has a restoring force underneath its tuning frequency and reduces inaudible excursions in the subsonic range. This in turn results in reduced intermodulation distortion in the working range.

The passive radiator allows a particularly low tuning or lower cut-off frequency in a very compact cabinet.

The Genelec 5040B is an extremely compact active subwoofer designed to complement up to five 6010B's with accurate and dynamic bass response reaching down to 35 Hz. Matched perfectly with the 6010B's, the 5040B conveniently features a remote volume control allowing adjustment of the entire sound system as well as versatile acoustic controls for perfect room integration.

Our Intelligent Signal Sensing (ISS) feature, reduces power consumption to less than 0.5 watts by automatically switching the active monitor to standby, when no audio signal has been detected for some time. When it receives an audio signal again, the loudspeaker turns back on.

ISS is fully compliant with the latest EU requirements and the ErP 2013 Directive for electronic devices.

Designed by Genelec's R&D team in co-operation with internationally acclaimed Finnish designer Harri Koskinen, the 5040B subwoofer features an unobtrusive, modern appearance.

The 5040B features a magnetically shielded downward firing 6 1/2" bass driver attached to a die-cast aluminium base plate.

The base plate also serves as the chassis for the 40 Watt amplifier and crossover filter circuitry. The 5040B packs a respectable punch of 98 dB maximum sound pressure level