FOCAL SHAPE TWIN ΕΝΕΡΓΟ STUDIO MONITOR DUAL 5″

•     Frequency range (-3 dB): 40 Hz to 35 kHz
•     Maximum sound pressure level (music): 110.5 dB SPL (Peak @ 1 m)
•     Electronics inputs/impedance type: XLR: Balanced, 10 kΩ
•     RCA connectors: Unbalanced, 10 kΩ with input sensitivity compensation
•     Amplifier for middle and bass range: 80 W, class AB
•     Power amplifier for the height range: 50 W, class AB
•     Automatic Standby mode
•     Shutdown: After approx. 30 minutes without input signal
•     End standby mode: By applied signal > 3 mV
•     Power supply voltage: 220 to 240 V (fuse: T2AL/250 V) or 100 to 120 V (fuse T3.15AL/250 V)
•     Connections: IEC socket and separate power cable
•     High-pass filter: Variable, range 45/60/90 Hz
•     Level Bass (0 - 250 Hz): Variable, +/- 6 dB
•     Middle/Bass (160 Hz, Q = 1): Variable, +/- 3 dB
•     Level Heights (4.5 - 35 kHz): Variable, +/- 3 dB
•     Power on/off: Switch On/Off on the rear
•     Power consumption in standby mode: 0.5 W
•     LED for power On/Off and standby
•     Woofer: 2 x 5“(13 cm) Flax Cone woofer
•     Tweeter: 1“(25 mm) aluminium/magnesium with M-profile
•     Cabinet construction: 15 mm MDF
•     Finish: Vinyl, walnut veneer, black lacquer
•     Dimensions with four rubber feet (H x W x D): 478 x 211 x 279 mm
•     Weight: 11 kg

The Solo6 Be monitor will surprise you in the very first minutes you spend with it, partly due to its size/extended bass response (40Hz at -3dB). The 6.5" "W” composite sandwich mid-woofer combines neutrality in the midrange, fullness in the midbass register and bass control. Its compactness and the choice of a large front laminar port guarantee easy integration in studios that need a near field monitor without any acoustic compromise. The user settings on the back of the Solo6 Be, combined with its compactness, make it easy to carry and to adjust according to the acoustics of each studio.

    * Active studio monitors with USB audio interface
    * 4.25-inch magnetically shielded, inverted cone, copolymer woofer
    * 1-inch silk dome high frequency driver
    * 2 x 20 watts of internal stereo power
    * Two combination mic and instrument/line inputs
    * Two 1/8-inch stereo headphone outputs with level controls
    * Includes Cakewalk® Sonar LE music production software
    * Mic and instrument/line gain control with clip LED
    * 16-bit 44.1kHz/48kHz
    * Stereo RCA and 1/8-inch aux inputs
    * 2-position switch for no-latency direct stereo and mono monitoring
    * Mix control to balance computer and audio sources
    * USB and speaker cable included

The compact LSR6325P-1 provides exceptional performance for use in applications
where accuracy is a must, but space is limited. With a 5.25 in. high-excursion woofer,
a damped titanium composite tweeter, and 150 Watts of amplification, it outperforms
many larger systems. When used with the LSR6312SP Subwoofer, the LSR6325P-1
is the heart of an exceptionally accurate yet space efficient full-range system.

Features:
High-performance bi-amplified design with patented JBL transducer technology.
Front panel volume and power controls.
Integrated mounting points for horizontal and vertical suspension.
Titanium composite high frequency device with elliptical oblate spheroidal waveguide.
Shielded for use next to video monitors.
Built in high-pass filtering for use with optional subwoofer.
User selectable workstation boundary compensation.
Powered monitors with 5.25" woofers and 1" titanium composite dome tweeters
100 watts power for low frequencies, 50 watts for highs
Cast aluminum enclosure for structural rigidity and light weight
Magnetically shielded for interference-free use near CRTs and other electronic gear
Linear Spatial Reference technology ensures even frequency response at the mix position
 

PRICE PER UNIT

The most powerful AX monitor

With its power and radiation characteristics, the brand new A8X is suitable for both nearfield and midfield monitoring. With a price/performance ratio that could hardly be better, this monitor is a perfect entry into these monitoring fields.

The A8X is equipped with the X-ART tweeter and a large (8.5”) midwoofer, a combination that adds both a very deep and yet very tight bass response to the unsurpassed reproduction qualities of the ADAM proprietary tweeter: a licence to thrill.

Cabinet- and bass reflex-construction

Like the other AX-Series models, the upper corners of the A8X are slanted to minimize reflections. The very large, double bass reflex tubes on the front have been specifically designed to perfectly match the midwoofer with its large voice coil.

Amplification and controls

With a 50W A/B amplifier for the tweeter and a 150W PWM amplifier for the midwoofer, the A8X has power in abundance and is the brawny monitor of the AX-Series.

On the rear panel are several controls: a gain for the high frequencies (± 4dB) and two shelf filters for the high and low frequencies.
There are both XLR (balanced) and RCA (unbalanced) connectors on the rear panel of the speaker, which allow the A8X to be used in almost any application.

Review: A8X: a "powerful link" between near- and midfield monitors!

"The A8X is a powerful link between ADAM´s AX Series and the formidable and more expensive SX Series. Its all-in-all homogenous tuning, the deep and precise bass as well as the brilliant mid- and high-frequency reproduction make this speaker a huge recommendation for ambitious people without deep pockets." (Professional Audio 10/2010)