| Content |
The Focusrite Clarett 4Pre is an 18 in/8 out Thunderbolt interface. It has four independent line outputs, two headphone outputs and a SPDIF I/O. New Clarett preamps model the classic ISA design Mic Pre EIN = -128dB World class dynamic range: 116dB A/D and 118dB D/A Latest Thunderbolt technology ensures interface latency of under 1ms 24bit, 192kHz sample rates Flagship Clarett 8Pre X designed for permanent professional studio install New 64-bit AAX, AU and VST compatible Red 2 and Red 3 Plug-in Suite Detailed metering All expandable over ADAT Includes MIDI I/O |
The 828mk3 is MOTU's most advanced FireWire audio interface. Once again it raises the bar with innovative new features, enhanced standard features that remain unique, superb sound and reliable performance.
The 828mk3 provides ten channels of pristine 192 kHz analog recording and playback, combined with sixteen channels of ADAT digital I/O and stereo S/PDIF. Expand your system by connecting additional MOTU FireWire audio interfaces or the 8pre mic input expander.
The 828mk3 is equally well-suited for studio and stage, with or without a computer. As an interface or standalone mixer, the 828mk3 provides 28 separate inputs and 30 separate outputs, including dedicated main outs on XLRs and two front panel headphone outs.
Connect all of your studio gear, including microphones, guitars, synths, keyboards, drum machines and even effects processors. Record, monitor, route and process all of these live inputs using the professional on-board CueMix FX digital mixer – with no latency and no processor strain on your computer. Apply hardware DSP-driven compression, EQ and reverb to every input and output, independent of your host computer. When recording from the mic/guitar inputs, the 828mk3ʼs signal overload protection gives you an extra 12 dB of headroom above zero with no digital clipping or harsh artifacts.
MOTU FireWire audio interfaces are fully compatible with FireWire 800-equipped Macs. All you need is a standard FireWire 400-to-800 cable. Just plug in and go. The FireWire bus operates at 400 Mb/sec, providing the same high speed, low latency and rock solid reliability that MOTU FireWire interfaces are known for.
After programming the on-board mixing in the studio, unplug the 828mk3 from the computer and take it on the road for operation as a stand-alone mixer with effects. All mixing and effects parameters are adjustable using the front panel backlit LCD.
The 828mk3 provides cross-platform compatibility with Mac and Windows and all of your favorite audio software and host-based effects via WDM/ASIO/Core Audio drivers. Or you can use the included AudioDesk workstation software for Mac, with 24-bit recording/editing and 32-bit mixing/processing/mastering.
|
The FA-66 is a 6-channel portable FireWire audio interface designed with the mobile recording and performance professional in mind. The FA-66 offers incredible audio fidelity, stability, and a practical set of input and output options. It also offers two XLR/TRS combo inputs with phantom power, plus two RCA inputs, four balanced +4dBu outputs, optical S/PDIF I/O, a built-in analog limiter, zero-latency direct monitoring, solid metal construction, and FireWire bus power, all in a durable compact case.
* 6-in/6-out 24-bit/96kHz simultaneous performance
* 4-in/4-out 24-bit/192kHz simultaneous performance
* 2 XLR/TRS combo jacks w/premium phantom-powered mic preamps
* +4 dB balanced input and output
* S/PDIF optical input & output ports with Sync LED indicator
* MIDI in/out ports
* Built-in analog limiter and indicator
* FireWire bus powered
* AC adaptor included
* Mac OS X CoreAudio and Windows XP WDM and ASIO 2.0 support
* Zero-latency Direct Monitoring
* 6-pin and 4-pin IEEE1394 ports
* Compact, solid-metal construction |
Yamaha GO46 FireWire Interface
The GO46 FireWire interface from Yamaha provides a means to stream
high-quality 24-bit/192kHz digital audio and MIDI into a computer. Connect
it to a laptop, and you've got a rugged and portable interface that can go
anywhere you go, hence the name "GO46." This box is the ideal interface
for great-sounding audio on the "GO."
Yamaha GO46 FireWire Audio/MIDI Interface At a Glance
Premium Mic Pres and Inputs
FireWire Connectivity
Flexible Connectivity Including S/PDIF, Insert Points, and MIDI
Premium Mic Pres and Inputs
The GO46 features combo mic/line terminals (for both XLR and phone jack)
on the front panel. Phantom power is also available and independently
switchable for each input channel. In other words, you can use a condenser
microphone on channel 1 with phantom power switched on to capture the
delicate sounds of a vocal while simultaneously recording an electric/acoustic
guitar plugged into channel 2. These combo inputs are captured at up to 24-bit/
192kHz resolution. This pro-level quality makes the GO46 perfect for any type
of recording, and allows you to capture the full details and nuances of the
original source - from the breathiness of a vocal to the delicate finger slides of
an acoustic guitar performance.
FireWire Connectivity
The FireWire equipped GO46 not only offers the convenience of one plug
connection to a computer, but the GO46 can be powered via bus power
from the FireWire port. Connect the GO46 to the FireWire terminal of a
laptop and you've got and extremely powerful and portable recording studio
that will fit in a backpack. This is also great for using the GO46 in places
where electrical outlets can be scarce, like local clubs.
Flexible Connectivity Including S/PDIF, Insert Points, and MIDI
In order to maximize the flexibility of the GO46, Yamaha included virtually
any kind of connection you might need on location recording gigs. Two
insert points allow for connection to outboard gear like compressors or EQs.
MIDI in/out allows for connection of MIDI sound modules or instruments.
S/PDIF jacks are great for inputting digital signal from another interface or
throughputting the GO46 signal to a digital mixer, separate digital recorder,
or any other digital device.
Yamaha GO46 Features:
FireWire (IEEE1394)
Durable aluminum die cast body
2 x Premium Quality Mic pre amps with XLR/Combo connectors
Phantom Power ( +48V ) switch for each connector
2 x Insert connectors for analog inputs
1 MIDI In/ 1 MIDI Out
S/P DIF In/Out up to 24 bit/96 kHz
24 Bit/192 kHz compatible
Included Cubase LE, HALion SE, and Groove Agent SE
|
The Traveler-mk3 is MOTU's most advanced FireWire audio interface. Once again it raises the bar with innovative new features, enhanced standard features that remain unique, superb sound and reliable performance.
Engineered for high-end mobile recording applications, the Traveler-mk3 delivers four very high quality mic inputs, bus power, optional battery power and DSP-driven mixing and effects processing.
The Traveler-mk3 provides eight channels of pristine 192 kHz analog recording and playback, combined with twenty channels of digital I/O in ADAT optical, AES/EBU and S/PDIF formats. Expand your system by connecting additional MOTU FireWire audio interfaces or the 8pre mic input expander.
The Traveler-mk3 is equally well-suited for studio, stage and remote locations, with or without a computer. As an interface or stand-alone mixer, the Traveler-mk3 provides 28 separate inputs and 30 separate outputs, including four XLR/quarter-inch "combo” mic/instrument analog inputs equipped with pre-amps, individual 48V phantom power switches and Digital Precision Trim™ controls conveniently adjusted from the front panel or CueMix FX™ software.
MOTU FireWire audio interfaces are fully compatible with FireWire 800-equipped Macs. All you need is a standard FireWire 400-to-800 cable. Just plug in and go. The FireWire bus operates at 400 Mb/sec, providing the same high speed, low latency and rock solid reliability that MOTU FireWire interfaces are known for.
Connect all of your audio instruments and gear, including mics, guitars, synths, keyboards, drum machines and even effects processors. Record, monitor, route and process all of these live inputs using the professional on-board CueMix FX digital mixer with no latency and no processor strain on your computer. Apply hardware DSP-driven effects processing to inputs, outputs, and busses independent of your host computer.
Add Classic Reverb™ with lengths up to 60 seconds. Further sculpt your sound with 7-band parametric EQ featuring filter types carefully modeled after British analog console EQs. Choose between two forms of compression: a conventional compressor and the Leveler™, an accurate model of the legendary LA-2A™ optical compressor that provides vintage, musical automatic gain control. When recording from the four mic/guitar inputs, the Traveler-mk3ʼs signal overload protection gives you an extra 12 dB of headroom above zero with no clipping or harsh artifacts.
After programming the on-board mixing in the studio, unplug the Traveler-mk3, remove the rack brackets, and take it on the road for operation as a portable, bus-powered audio interface for a laptop or battery-operated stand-alone mixer with effects. The Traveler slides easily into your backpack and fits neatly beneath your laptop. All mixing and effects parameters are adjustable using the front panel backlit LCD. Record extended sessions even in the most remote locations with the complete freedom of field battery power.
The Traveler-mk3 provides cross-platform compatibility with Mac and Windows and all of your favorite audio software and host-based effects via WDM/ASIO/Core Audio drivers. Or you can use the included AudioDesk workstation software for Mac, with 24-bit recording/editing and 32-bit mixing/processing/mastering.
|
Equipped with the latest generation 24-bit, enhanced multi-bit 128x oversampling 192-kHz converters, the HD192 achieves a remarkable A-weighted signal-to-noise ratio of 120 dB with balanced XLR connectors throughout. Ideal for surround applications, the HD192's 12 inputs and 12 outputs can support two simultaneous 5.1 mixes. And the HD192 is full of advanced features, like AES/EBU I/O with sample rate conversion both in and out.
The PCI-424 card introduced with the 2408mk3 is 192-kHz ready. Just connect the HD192 expansion interface to record 192-kHz audio.
The HD192 can be purchased as an expander for an existing PCI-424-based MOTU Audio System, or as a core system which includes the PCI-424 card and Audiodesk workstation software.
|
Reviews
There are no reviews yet.