| Content | A Merit Series Power Conditioner is the perfect low-cost AC power solution for any rack mount system. Install an M-10x E in to the top slot of your rack, and the ten switched outlets in the rear panel will power up and protect all your equipment up to a 10-amp load.
SPECIFICATIONS:
| Maximum Output Current: |
10 amps |
| Line Cord: |
1.5 meter, removable, IEC C-13 female to Schuko male |
| Operating Voltage: |
230VAC 50Hz |
| Spike Protection Mode: |
Line to neutral |
| Energy Dissipation: |
305 joules |
| Peak Impulse Current: |
12,000 amps |
| Maximum Continuous Opterating Voltage: |
650 Volts |
| Noise Attenuation: |
Transverse mode: Greater than 20dB, 1.5Mhz to 200 Mhz |
| Dimensions: |
1.75” H x 19” W x 7.5” D |
| Weight: |
2.3 kg. |
| Safety Agency Listing: |
CE |
| Warranty: |
Merit Series units are protected by a limited three year warranty covering defects in materials and workmanship. |
|
AC Current Capactiy:
Input - 10 Amp capacity required
Output - 10 Amps RMS (both outlets combined)
Linear Noise Attenuation:
> 40 dB @ 100 kHz.
>50 dB @ 500kHz
(Linear attenuation curve from 0.05 to 100 ohms line impedance)
Transient Voltage Surge Suppression:
230 VAC - Series Multi-Stage Protection
Non-Sacrificial with Zero Ground Contamination.
376V peak clamping @ 6000V 3000A input
Extreme Voltage Shutdown (>135 VAC)
Extreme Voltage Shutdown: 275 VAC (Auto-Reset)
Dimensions: 1.75ʼ H x 5ʼ W x 8.5ʼ D
Weight: 3 lbs.
Safety Agency Listing: CE
| Adam Hall Cables 87471
19" Power Strip 1U 8-way with switch
Mains Distribution Unit 19"/1 U
- Illuminated 2-pole switch on the front panel
- 8 mains outlets on the rear panel
- Black aluminium housing
- 54 mm deep
- 19 "angle can be mounted in four positions
Product type
19" rack mains socket strips
Number of outlets (Earthing contact / IEC 7/4)
8, Rotated 45°
Cable connector
angled, Earthing contact (CEE 7/7)
Cabinet material
Aluminium, Plastic
Other features
Illuminated on / off switch, Mounting brackets can be used in 4 positions
|
Lighting unit for rack 19?. Eight mains outputs (IEC connector) with independent switch and
individual filter. Adjustable lighting level. |
- Rated @ 250 V, 16 A
- 16 x 45° angled outlets
- 8 front and 8 rear outlets with individual on/off switches
- Overload protection
The 874716 provides 16 type F grounded outlets in a 19" aluminum enclosure with permanently attached 2 m cord and angled CEE 7/7 power plug. The 1 U rackmount power strip features individual illuminating on/off switches for the 8 front and rear outlets each plus overload protection with individual circuit breakers and reset buttons.
Product type
19" rack mains socket strips
Type
19" / 1 U
Number of outlets (Earthing contact / IEC 7/4)
2 x 8
Power input
cables
Cable length
2 m
Cable connector
angled , Earthing contact (CEE 7/7)
Cross section
1.5 mm²
Operating voltage
250 V
Max. current
16 A
Cabinet material
Aluminium
Colour
Black
Width
485 mm
Height
44 mm
Depth
126 mm
Special feature
8 x Sockets back side , 8 x Sockets front side , Overload protection for front and rear side , Separate front and rear switches
Weight
1,7 kg
| The Classic Series from Furman brings together superior protection and outstanding performance in a sturdy, rack-mountable design. The Classic Series features Furmanʼs revolutionary Series Multi-Stage Protection (SMP), Linear Filtering Technology (LiFT), and Extreme Voltage Shutdown (EVS). Together, these technologies comprise what is, without question, one of the world's most advanced and comprehensive transient voltage surge supressors.
SPECIFICATIONS:
| Maximum Output Current: |
10 amps |
| Line Cord: |
3/1.0MM AWG, 2.5M cord w/IEC female to 10A Schuko plug |
| Pull-out Lights: |
Two multi-LED, dimmable lamps |
| BNC Socket w/Switch: |
Rear rack lamp, 12VAC 500MA maxx (lamp not included) |
| Operating Voltage: |
180 to 274 VAC |
| Spike Protection Mode: |
Line to neutral, zero ground leakage |
| Spike Clamping Voltage: |
375 VAC peak @ 3,000 Amps |
| Response Time: |
1 nanosecond |
| Maximum Surge Current: |
6,500 Amps |
| Noise Attenuation: |
10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz |
| Dimensions: |
482.6mm W x 266.7mm D x 4.45mm H |
| Weight: |
6 kg. |
| Power Consumption: |
12 watts |
| Safety Listing: |
CE |
|
Reviews
There are no reviews yet.