| Content | The Classic Series from Furman brings together superior protection and outstanding performance in a sturdy, rack-mountable design. The Classic Series features Furmanʼs revolutionary Series Multi-Stage Protection (SMP), Linear Filtering Technology (LiFT), and Extreme Voltage Shutdown (EVS). Together, these technologies comprise what is, without question, one of the world's most advanced and comprehensive transient voltage surge supressors.
SPECIFICATIONS:
| Maximum Output Current: |
10 amps |
| Line Cord: |
3/1.0MM AWG, 2.5M cord w/IEC female to 10A Schuko plug |
| Pull-out Lights: |
Two multi-LED, dimmable lamps |
| BNC Socket w/Switch: |
Rear rack lamp, 12VAC 500MA maxx (lamp not included) |
| Operating Voltage: |
180 to 274 VAC |
| Spike Protection Mode: |
Line to neutral, zero ground leakage |
| Spike Clamping Voltage: |
375 VAC peak @ 3,000 Amps |
| Response Time: |
1 nanosecond |
| Maximum Surge Current: |
6,500 Amps |
| Noise Attenuation: |
10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz |
| Dimensions: |
482.6mm W x 266.7mm D x 4.45mm H |
| Weight: |
6 kg. |
| Power Consumption: |
12 watts |
| Safety Listing: |
CE |
| A Merit Series Power Conditioner is the perfect low-cost AC power solution for any rack mount system. Install an M-10x E in to the top slot of your rack, and the ten switched outlets in the rear panel will power up and protect all your equipment up to a 10-amp load.
SPECIFICATIONS:
| Maximum Output Current: |
10 amps |
| Line Cord: |
1.5 meter, removable, IEC C-13 female to Schuko male |
| Operating Voltage: |
230VAC 50Hz |
| Spike Protection Mode: |
Line to neutral |
| Energy Dissipation: |
305 joules |
| Peak Impulse Current: |
12,000 amps |
| Maximum Continuous Opterating Voltage: |
650 Volts |
| Noise Attenuation: |
Transverse mode: Greater than 20dB, 1.5Mhz to 200 Mhz |
| Dimensions: |
1.75” H x 19” W x 7.5” D |
| Weight: |
2.3 kg. |
| Safety Agency Listing: |
CE |
| Warranty: |
Merit Series units are protected by a limited three year warranty covering defects in materials and workmanship. |
|
- Rated @ 250 V, 16 A
- 16 x 45° angled outlets
- 8 front and 8 rear outlets with individual on/off switches
- Overload protection
The 874716 provides 16 type F grounded outlets in a 19" aluminum enclosure with permanently attached 2 m cord and angled CEE 7/7 power plug. The 1 U rackmount power strip features individual illuminating on/off switches for the 8 front and rear outlets each plus overload protection with individual circuit breakers and reset buttons.
Product type
19" rack mains socket strips
Type
19" / 1 U
Number of outlets (Earthing contact / IEC 7/4)
2 x 8
Power input
cables
Cable length
2 m
Cable connector
angled , Earthing contact (CEE 7/7)
Cross section
1.5 mm²
Operating voltage
250 V
Max. current
16 A
Cabinet material
Aluminium
Colour
Black
Width
485 mm
Height
44 mm
Depth
126 mm
Special feature
8 x Sockets back side , 8 x Sockets front side , Overload protection for front and rear side , Separate front and rear switches
Weight
1,7 kg
| Adam Hall Cables 87471 C20
19" Power Strip 1U 8-way with C20 cold device socket
- Power distributor with IEC C20 socket and detachable supply cable included
- Max. current 16 A
- 8 45° rotated Schuko sockets
- Illuminated mains switch
- 250 V operating voltage
Description
Professional and stable 8-way socket strip in 19" format with 1 U. Perfectly suited for installation in racks and the associated power distribution of devices. For a maximum current of 16 A in connection with an IEC cable, there is the IEC C20 connection, which is installed here. The mains cable with IEC C19 on angled Schuko connection and 2 m length is included. The power distributor has an on/off switch at the front and the sockets at the rear are rotated by 45°.
Product type
19" rack mains socket strips
Number of outlets (Earthing contact / IEC 7/4)
8
Cable connector
angled, Earthing contact (CEE 7/7)
Cross section
3 x 1.5 mm² mm²
Cabinet material
Aluminium
Other features
19" rack mains socket strips, Illuminated on / off switch
| Adam Hall Cables 87471 X7
19" Power Strip 1U 7-way with switch & protection cap
- Mountable Power Strip from our 19" PDU range
- With recessed, illuminated switch and protective cap
- 7 Schuko sockets rotated 45°
- With 8-way adjustable mounting brackets
- 1.4 m PVC cable with angled Schuko plug
The practical solution for your 19" rack. Our 87471 X7 with 8-way adjustable stable mounting ears and 7 Schuko sockets comes with a protective cap for the switch. This prevents the power distributor from being switched off accidentally. The cable routing on the side is supplied with a PVC cable (H05VV-F) with 3 x 1.5 mm² inner conductor and an angled Schuko plug.
Product type
19" rack mains socket strips
Number of outlets (Earthing contact / IEC 7/4)
7, Rotated 45°
Cable connector
angled, Earthing contact (CEE 7/7)
Cabinet material
Aluminium, Plastic
Other features
Illuminated on / off switch with protective cap, Mounting brackets can be inserted in 8 positions
|
Lighting unit for rack 19?. Eight mains outputs (IEC connector) with independent switch and
individual filter. Adjustable lighting level. |
Reviews
There are no reviews yet.