Content |
Griven AD-3462 EVEREST CYM 900 700W
EVEREST CYM 900 is another of the 2004 newcomers to theexpanding Architectural Dimension range. This unit uses the samehousing as the Colosseo OS CYM 1000, and, due to the greateroutput of the MSD700 lamp, is an even more powerful alternativeto the Colosseo. Standard 7?? optics will produce an ultra narrowbeam for great distances, the only trade off being a less smoothmix of colour changing at closer projection distances, due to themore focused image. This ultra bright, ultra narrow beam ability isprobably unique from an IP 65 rated colour changer and will givelighting designers and specifiers opportunities not previously availableto them. However, the standard front diffusion glass and the manuallyadjustable zoom between 17?? and 24?? make the projector highlysuitable for long distance coverage, as well. Other beam anglescan also be achieved with optional additional filters. Colour sequencesand blends can be selected from a pre-programmed internalcontroller, with multiple unit synchronisation possible, or controlledfrom the IP65 CYM dedicated controller or from any DMX512 controlsystem. A version of the Everest - EVEREST CYM 900 HFT - isavailable fitted with a wireless DMX receiver, for trouble free controlof large or otherwise awkward installations where the running ofDMX signal cable from the control system to the projector could beproblematic. This system requires the use of Griven?fs wireless DMXtransmitter. See dedicated section for more information.
LAMP 700 W, 50.500 lm, 6.000 ?°K Discharge lamp MSD 700 Average rated life 3.000 hours G 22 base Ordering code LP0700
STANDARDS Pressure diecast aluminium body, with an adjustable mounting yoke. Scratch resistant textured polyester grey finish, which protects against UV deterioration and general corrosion. Front tempered glass shock resistant. Certified IP65 weather protection Electrical class: I Shock resistance: 0,8J. Product in compliance with CEI EN 60598-1 and CEI EN 60598-2-17.
OPTICAL GROUP The optical system utilises an aluminium parabolic reflector to produce a 7?° hard edge beam. A soft edge beam between 17?° and 24?° is available by the intasllation of an additional diffusion glass included and a manual zoom adjustment. Additional filters are available for alternative beam adjustments.
COLOUR CHANGER SYSTEM CYM colour changer system operated by high precision step motors, whereby the mixing of cyan, yellow and magenta dichroic filters can create virtually any desired colour.
BLACK-OUT Variable speed black out effect. Linear 0-100% dimmer function. 2,6 FpS strobe maximum speed.
LAMP Internal controller with a choice of eight pre-programmed colour change sequences, any of which can be easily selected from a rear mounted dip switch control panel. Master/slave option for multi unit synchronisation. The dedicated IP65 CYM controller gives full remote programmed control, or any DMX512 controller can be linked five channels of DMX per projector. Remote lamp on/off function.
COOLING An internal axial fan 120x120 mm keeps the level of heat within the unit constant and helps dissipation through the metal body, which assists lamp life and protects internal components and reflectors from heat damage.
POWER SUPPLY 230 V, 50 Hz, 5,8 Amp |
LED headlight with strong white lighting.
It can be mounted on a flat surface, on the floor or wall-mounted.
Exterior lighting for commercial and industrial buildings, parks, sports fields, garage facilities, parking, and advertising structures. Low operating temperature, lack of consumables, much lower energy consumption, durability and weather resistance, environmentally friendly products. External, watertight.Photos may vary little.
The high degree of IP66 tightness makes these LED headlights suitable for outdoor use.Advantage is the long service life of up to 50,000 hours, compared to a conventional lamp that has an operating duration of about 2,000 hours.
Ideal for entrances, garages, terraces, cottages, shop windows, warehouses, etc.
Features:
- Power: 100W
- Voltage: AC85 – 265V
- Lumens: 9000Lm
- Lighting color: White
- Color temperature: 6500K
- Lighting Angle: 120º
- Lifespan: ≥50000 hours
- Waterproofing level: IP66
- Dimensions: 23 x 4 x 26cm
- Color: Black
|
Griven AD-3233 Pantheon OS CYM 400 400W
PANTHEON OS CYM 400, which is fitted with a metal halide HQI-TS 400W 6000 hours lamp, is equipped with an optical system that produces a long throw beam of approximately 46? Alternative beam angles can be achieved by optional expansion filters. The high IP65 rating against water and dust ingress means that the unit is suitable for virtually any exterior or interior application and can be mounted in any orientation. The colour mixing system with cyan, yellow and magenta dichroic filters creates virtually unlimited colour hues, coupled with smooth blends between colour changes. Colour sequences can be selected from a pre-programmed internal controller, with multiple unit synchronisation possible, or controlled from the IP65 CYM dedicated controller, or from any DMX512 control system. A version of the Pantheon - PANTHEON OS CYM 400 HFT ?¨C is available fitted with a wireless DMX receiver, for trouble free control of large or otherwise difficult installations where the running of DMX signal cable from the control system to the projector could be problematic. This system requires the use of Griven's wireless DMX transmitter. See dedicated section for more information.
LAMP 400 W, 28.000 lm, 5.600?°K Metal halide lamp HQI-TS 400/D Average rated life 6.000 hours Special base Ordering code LP1006
STANDARDS Pressure diecast aluminium body, with an adjustable mounting yoke. Scratch resistant textured polyester grey finish, which protects against UV deterioration and general corrosion. Front tempered glass shock resistant. Certified IP65 weather protection Electrical class: I Shock resistance: 0,8J. Maximum ambient temperature: 35?°C. Maximum operating temperature: 100?°C. Product in compliance with CEI EN 60598-1 and CEI EN 60598-2-17.
OPTICAL GROUP The optical system utilises an aluminium ellipsoidal reflector and produces a soft edge beam of approximately 35?°. Additional filters are available for alternative beam adjustments.
COLOUR CHANGER SYSTEM CYM colour changer system operated by high precision step motors, whereby the mixing of cyan, yellow and magenta dichroic filters can create virtually any desired colour.
BLACK-OUT A simulation of black-out effect is achieved by the simultaneous closing of all dichroic filters, which is controlled from an external DMX controller.
CONTROL Internal controller with a choice of eight pre-programmed colour change sequences, any of which can be easily selected from a rear mounted dip switch control panel. Master/slave option for multi unit synchronisation. The dedicated IP65 CYM controller gives full remote programmed control, or any DMX512 controller can be linked - three channels of DMX per projector.
COOLING An internal axial fan 80x80 mm keeps the level of heat within the unit constant and helps dissipation through the metal body, which assists lamp life and protects internal components and reflectors from heat damage.
POWER SUPPLY 230 V, 50 Hz, 2,5 Amp |
Griven AD-3252 Colosseo OS CYM 1000 1000W
The high light output afforded by the HQI 1000W lamp means that COLOSSEO OS CYM 1000 can be used to light up large buildings, giving even colour coverage over a large area. The projector can be mounted in any orientation, which means, for example, that a tall building could be lit from top and bottom, or, using two pairs of units, from the middle of both sides facing towards the opposite corners. Alternative beam angles can be achieved by optional expansion filters. The high IP65 rating against water and dust ingress means that the unit is suitable for virtually any exterior or interior application and can be mounted in any orientation. The colour mixing system with cyan, yellow, and magenta dichroic filters creates virtually unlimited colour hues, coupled with smooth blends between colour changes. Colour sequences can be selected from a pre-programmed internal controller with multiple unit synchronization possible, or controlled from the IP65 CYM dedicated controller, or from any DMX 512 control system. A version of the Colosseo - COLOSSEO OS CYM 1000 HFT - is avaialble fitted with a wireless DMX receiver for trouble free control of large or otherwise awkward installations where the running of DMX signal cable from the control system to the projector could be problematic. This system requires the use of Griven's wireless DMX transmitter. See dedicated section for more information.
LAMP 1000W, 90.000 lm, 5.900?°K Metal halide lamp HQI-TS/D/S 1000 Average rated life 6.000 hours Special base. Ordering code LP1008
STANDARDS Pressure diecast aluminium body, with an adjustable mounting yoke. Scratch resistant textured polyester grey finish, which protects against UV deterioration and general corrosion. Front tempered glass shock resistant. Certified IP65 weather protection Electrical class: I . Shock resistance: 0,8J. Product in compliance with CEI EN 60598-1 and CEI EN 60598-2-17.
OPTICAL GROUP The optical system utilises an aluminium parabolic reflector and produces a soft edge beam of approximately 35?°. Additional filters are available for alternative beam adjustments.
COLOUR CHANGER SYSTEM CYM colour changer system operated by high precision step motors, whereby the mixing of cyan, yellow and magenta dichroic filters can create virtually any desired colour.
BLACK-OUT A simulation of a black-out effect is achieved by the simultaneous closing of all dichroic filters, which is controlled from an external DMX controller.
CONTROL Internal controller with a choice of eight pre-programmed colour change sequences, any of which can be easily selected from a rear mounted dip switch control panel. Master/slave option for multi unit synchronisation. The dedicated IP65 CYM controller gives full remote programmed control, or any DMX 512 controller can be linked - three channels of DMX per projector.
COOLING An internal axial fan 120x120 mm keeps the level of heat within the unit constant and helps dissipation through the metal body, which assists lamp life and protects internal components and reflectors from heat damage.
POWER SUPPLY 230V, 50Hz, 1,7 Amp. |
User\'s manual DMX Control Table Eco label Photometric measurements Daslight V3 fixtures Fixture Library grandMA2
Cameo FLAT PRO FLOOD IP65 TRI Outdoor Flood Light with 60 Watt Tri-Color COB LED in black housing
- 1 x 60W Tri Color COB LED
- IP65 rated for outdoor applications
- Flicker free
- 120 degrees dispersion for perfect wall-washing effects
- DMX control plus master, slave and standalone modes
- Easy to operate via mode, enter, up and down keys with backlit display
- Menu lock to prevent unauthorized access
- Compact heavy-duty metal enclosure
- Universal mounting bracket
- DMX and mains input and output on screw connectors
- Barn doors available as accessory
The Cameo FLAT PRO series FLOOD IP65 TRI is a compact outdoor LED flood light with IP65 rating, 120° beam angle and convection cooling. A 60 watt tri-color COB LED generates rich, saturated RGB colors with a 3,000 Hz refresh rate providing flicker free performance. The black heavy-duty metal enclosure features screw connectors for DMX and mains input and output plus a backlit display with mode, enter, up and down keys for easy operation. The Cameo FLOOD IP65 TRI allows for 2-channel, 3-channel 1, 3-channel 2 and 6-channel DMX control as well as master, slave and standalone modes while a setting lock prevents unauthorized menu access. The universal bracket adds a wide variety of mounting options. Barn doors are available as accessory.
Product type
LED PAR Lighting
Type
Outdoor
Colour spectrum
RGB
Number of LEDs
1
LED type
60 W COB TRI LED
Refresh rate
3000 Hz
Dispersion
120 °
DMX input
3-pin special connector, screwable
DMX output
3-pin special connector, screwable
DMX mode
2-channel , 3-channel 1 , 3-channel 2 , 6-channel
DMX Functions
colour fade , colour jump , colour macro , master dimmer , RGB , strobe
Standalone modes
Auto run , colour fade , colour jump , colour macro , master / slave mode , static colour
Controls
Enter , mode , Value Down , Value Up
Indicators
backlit LCD
Operating voltage
110 V AC - 240 V AC / 50 – 60 Hz
Power consumption
75 W
Power connector
3-pin special connector, screwable
Housing material
metal
Cabinet colour
Black
Protection class IP
65
Cooling
Convection
Illuminance
830lx @ 1m
Dimensions without mounting bracket
Width
180 mm
Height
180 mm
Length
120 mm
Weight
3,2 kg
|
Griven GR 402 Kolorjet 4000W
Architectural Colour Changer
KOLORJET is an immensely powerful outdoor colour changer with weatherproofing to a certified IP44 rating. This far advanced unit uses a Xenon 4000W lamp for an extraordinary light output which should fulfil the most demanding applications in the architectural lighting field. The power of the lamp is enhanced by the performance of the nickel rhodium plated reflector and the CYM colour mixing system creates an almost unlimited variety of hues. These features make KOLORJET ideal for such applications as concert touring, skyscraper highlighting and movie sets, where the quality and power of a flicker free XENON lamp are required. An electronic zoom varies the beam size, yet another feature for a unit already packed with technology and with a wide range of capabilities, and designed for absolute reliability. On board or remote DMX512 control gives instant access to all functions, including colour mixing, frost soft edge effect, black out, strobe and stand by (reducing power and lamp consumption). Pre-programmed automatic colour sequences are also selectable and the master/slave option allows multiple units to be operated in synchrony.
Technical features - LAMP SOURCE Type: XENON Wattage (W): 4000 Base: SFAX 30-9,5 SFA 30-8 Lamp life (h): 1.000 Lumens: 155.000 - COLOURS Color (MIX): - PROJECTION Angle: 1?°-16?° Zoom: Motorised Dimmer: Mechanical Strobe: 2 Fps Filters: Frost - OPERATION DMX channels: 7 Stand alone: Master / Slave: On Board Control: - HOUSING Weather protection: IP44 Cooling: FV - SIZE (mm) Height: 1375 Width: 715 Depth: 680 - - WEIGHT (kg) Main fixture: 60 (143 ballast incl.) Ballast set: 83 - POWER Input (V): 220-380 Three-fase +N +G HZ: 50-60 AMP: 9 (380V) - 17 (220V) |
Reviews
There are no reviews yet.