Content |
REF : CC KX6-375P2
Quality Cable
PRICE PER METER
High Quality AUDIO(or DATA) – VIDEO – POWER CABLE MADE IN FRANCE
Composite cable: 1 coaxial cable 75 Ω (KX6) + 2 shielded data pairs 0.34 mm² + 3G0.75 mm² feeders. Black PVC outer sheath.
Construction
COAXIAL CABLE:
- INNER CONDUCTOR: stranded bare copper (7 x 0.20 mm nom.)
- DIELECTRIC: Foam PE (Ø = 3.70 mm nom.)
- SHIELD: copper braid (Coverage > 69%)
- SHEATH: green or black PVC Ø = 6.15 mm nom.
DATA PAIRS:
- CORE: bare copper 0.34 mm²
- INSULATION: PE - Ø = 1.15 mm nom.
- COLOUR: blue and white
- SHIELD: tinned copper drain wire + Al/PES tape.
- SHEATH: blue PVC - Ø = 3.0 mm
POWER CABLE:
- CORE: flexible stranded bare copper S = 0.75 mm².
- INSULATION: PVC- Ø = 2.1 mm nom.
- COLOUR: black – red – green/yellow
- SHEATH: grey PVC - Øext = 6.10 mm nom.
GENERAL ASSEMBLY: {1 coaxial cable 75 Ω + 2 pairs 0.34 mm² + 1 cable 3G0.75 mm²} + synthetic fillers under a PES tape + rip cord.
MARKING: CC KX6-375P2 + Batch number
Electrical properties
COAXIAL CABLE:
Inner conductor electrical resistance:
Outer conductor electrical resistance:
Impedance @ 200 MHz: 75 ± 3 Ω.
Capacitance: 67 pF/m nom.
Attenuation at 20°C:
Velocity of propagation: 66 %
DATA PAIRS:
Operating voltage: 100 V.
Electrical resistance at 20°C:
Test voltage (1 min. / 50 Hz): 1500 V
Mutual capacitance: 125 pF/m nom.
POWER CABLE:
Operating voltage: 230 V
Test voltage: 2000 V
Electrical resistance at 20°C:
Insulation resistance: > 100 MΩ.km
Working temperature: - 20°C Æ +70 °C
Acc. to the RoHS standard
Fire behaviour:
C2 acc. to IEC 60332-1 / NFC32070
| Is exactly the cable all "bending radius fetishists", such as live technicians, musicians, and ambitious live sound people have been dreaming of! The QUANTUM is absolutely torsion-free, i.e. it can be wound in the shape of an "8" without any problems and will not twist when it is wound or unwound. Not only the S-PVC-jacket, resistant to a temperature of -30 °C and notchresistant, feels soft but the inside as well, and is also break-resistant due to the super fine 0.07 mm (!) individual copper litz and the PE-insulated wire insulation. The electrical and mechanical data also is remarkable: each wire pair is additionally insulated with a sleeve, numbered, and shielded with a copper spiral covered to 99 %. Get a taste of this: The QUANTUM stands out with a low capacity of 45 pF wire/wire and remains 110 Ohms (AES/EBU) conform for hundreds of meters! The wire pair diameter is perfectly suitable for direct installation (e.g. a XLRconnector). The inside is protected against adverse influences by a highly flexible PVC-jacket with a wall thickness of almost 2 mm. There never has been a cable with the same electrical and mechanical values atsuch a low price!
Center conductor cross section
0.14 mm²
Center conductor material
copper
Center conductor construction
36 x 0.07 mm
Number of internal conductors
16
Line resistance
<90 Ohm(s)
Additional information
Inner conductors shielded in pairs, AES/EBU-compliant
| Adam Hall Cables 4 STAR HPD 325 Hybrid Cable Power & DMX 3 x 2.5 mm² & 2 x 0.22 mm². Price per meter
Type
Power / Signal Cable
Temperature range
-20 - 70 °C
Power
Number of internal conductors
3
Center conductor cross section
2.5 mm²
Center conductor construction
96 x 0.10 mm
Center conductor material
OFC
DMX
Number of inner conductors 2
2
Center conductor cross section 2
0.22 mm²
Center conductor construction 2
7 x 0.20 mm
Center conductor material 2
OFC
Shield
Aluminium foil, Copper spiral coil shield
Conductor resistance 2
85 ohm/km
|
24 AWG stranded (7x32) TC conductor, polyolefin insulation, individually shielded Beldfoil? (100% coverage) numbered/color-coded PVC jackets, jackets and shields bonded to strip simultaneously, overall Beldfoil shield and 24 AWG TC drain wire. PHYSICAL CHARACTERISTICS : CONDUCTOR : Number of Pairs: 4 Total Number of Conductors: 8 AWG: 24 Stranding: 7x32 Conductor Diameter: .024 in. Conductor Material: TC - Tinned Copper INSULATION : Insulation Material: PO - Polyolefin Nom. Insulation Wall Thickness: .008 in. Insulation Diameter: .040 in. Lay Length: 1.75 in. Twists/ft.: 6.85 Pair Color Code Chart: Red & Black INNER SHIELD : Inner Shield Material Trade Name: Beldfoil? Inner Shield Type: Tape Inner Shield Material: Aluminum Foil-Polyester Tape Inner Shield % Coverage: 100 % Inner Shield Drain Wire AWG: 24 Inner Shield Drain Wire Stranding: 7x32 Inner Shield Drain Wire Conductor Material: TC - Tinned Copper INNER JACKET : Inner Jacket Material: PVC - Polyvinyl Chloride Inner Jacket Nominal Wall Thickness: .014 in. Inner Jacket Diameter: .111 in. Inner Jacket Color Code Chart: Number Color 1 Brown 2 Red 3 Orange Number Color 4 Yellow OUTER SHIELD : Outer Shield Material Trade Name: Beldfoil? Outer Shield Type: Tape Outer Shield Material: Aluminum Foil-Polyester Tape Outer Shield %Coverage: 100 % OUTER SHIELD DRAIN WIRE : Outer Shield Drain Wire AWG: 18 Outer Shield Drain Wire Stranding: 7x26 Outer Shield Drain Wire Conductor Material: TC - Tinned Copper OUTER JACKET : Outer Jacket Material: PVC - Polyvinyl Chloride Outer Jacket Nominal Wall Thickness: .037 in. Outer Jacket Ripcord: Yes OVERALL NOMINAL DIAMETER : Overall Nominal Diameter: .352 in. MECHANICAL CHARACTERISTICS : Operating Temperature Range: -35°C To +75°C Bulk Cable Weight: 51.9 lbs/1000 ft. Max. Recommended Pulling Tension: 88.4 lbs. Min. Bend Radius (Install): 3.5 in.
APPLICABLE SPECIFICATIONS AND AGENCY COMPLIANCE : APPLICABLE STANDARDS : NEC/(UL) Specification: CM CEC/C(UL) Specification: CM EU CE Mark (Y/N): Yes EU RoHS Compliant (Y/N): Yes EU RoHS Compliance Date (mm/dd/yyyy):: 01/01/2004 PLENUM/NON-PLENUM : Plenum (Y/N): N ELECTRICAL CHARACTERISTICS : Nom. Inductance: .18 ?H/ft Nom. Capacitance Conductor to Conductor @ 1 KHz: 31 pF/ft Nom. Cap. Cond. to Other Cond. & Shield @ 1 KHz: 58 pF/ft Nominal Velocity of Propagation: 66 % Nom. Conductor DC Resistance @ 20 Deg. C: 23.3 Ω/1000 ft Ind. Pair Nominal Shield DC Resistance @ 20 Deg. C: 15.9 Ω/1000 ft Max. Operating Voltage - UL: 300 V RMS Max. Recommended Current: 1.05 Amps per conductor @ 25°C | Adam Hall by Procab - power and audio cable Ø 14 mm
The PAC50 is a high quality signal and power cable in one jacket. This kind of cable is designed to fulfill all demands when using active loudspeakers. The cable consists of a power cable and a balanced signal cable. A general outer jacket with an O.D. of 14 mm and made of flexible PVC protects each inner cable against abrasion. The inner power cable contains 3 conductors with a section of 1.0 mm², protected by a PVC jacket with an O.D of 7 mm.
The signal section is balanced and contains two twisted inner conductors of 0.125 mm² with an excellent shielding to prevent any influence of hum, noise, radio interference and magnetic fields.
The signal section is also protected by an outer jacket of PVC with an O.D. of 3.5 mm. The PAC50 cable finds its application in mobile systems where power and signal are desired to be in one cable (active speaker systems).
TECHNICAL DATA:
- Art No.: KCPAC50
- Type of cable: Signal cable
- Containing: Power cable & audio cable
- Cover: cotton paper
- Outer jacket: Flexible PVC
- Outer jacket color: Black
- Outer jacket dimensions: Ø 14 mm
- Printing color: white
- Printing text: Procab PAC50
- Type of packing: wooden reel for 100 meter
MECHANICAL DATA:
- Temperature range fixed installation:
- Fixed installation: -40° C to +80° C
- Flexible installation: -25° C to +70° C
- Bending radius :
- Fixed installation: 8 x outer diameter
- Flexible installation: 10 x outer diameter
AUDIO CABLE:
- Type of cable: Signal cable
- Inner conductor: 2 x TC 7 x 0.15 mm
- Inner conductor section: 2 x 0.125 mm²
- Conductor twisting: Yes
- Isolation: PE , Ø 1,5 mm
- Shielding: TC 32 x 0.12 mm, spiral
- Shielding %: 100%
- Outer jacket: Flexible PVC
- Outer jacket color: grey
- Outer jacket dimensions: Ø 3,5 mm
- Lead resistance: 13.75 ohm - 100 meter
- Cable cross-talk: Min. 73.3 dB - 100 meter
- Capacitance lead to lead: 54 pF - meter 1 kHz
- Capacitance lead to Shielding: 98 pF - meter 1 kHz
POWER CABLE:
- Type of cable: Power cable
- Inner conductor: 3 x BC 58 x 0,15 mm
- Inner conductor section: 3 x 1 mm²
- Inner conductor color: green 6 yellow - blue - brown
- Outer jacket: Flexible PVC
- Outer jacket color: black
- Outer jacket dimensions: Ø 7 mm
- Lead resistance: 1.35 ohm - 100 meter
- Max. operation voltage: 450 Volt
- Max current: 10 amp
- Approval: CE
|
24 AWG stranded (7x32) TC conductor, polyolefin insulation, individually shielded Beldfoil? (100% coverage) numbered/color-coded PVC jackets, jackets and shields bonded to strip simultaneously, overall Beldfoil shield and 24 AWG TC drain wire. PHYSICAL CHARACTERISTICS :
CONDUCTOR : Number of Pairs: 32 Total Number of Conductors: 64 AWG: 24 Stranding: 7x32 Conductor Diameter: .024 in. Conductor Material: TC - Tinned Copper INSULATION : Insulation Material: PO - Polyolefin Nom. Insulation Wall Thickness: .008 in. Insulation Diameter: .040 in. Lay Length: 1.75 in. Twists/ft.: 6.85 Pair Color Code Chart: Red and Black INNER SHIELD : Inner Shield Material Trade Name: Beldfoil? Inner Shield Type: Tape Inner Shield Material: Aluminum Foil-Polyester Tape Inner Shield % Coverage: 100 % Inner Shield Drain Wire AWG: 24 Inner Shield Drain Wire Stranding: 7x32 Inner Shield Drain Wire Conductor Material: TC - Tinned Copper INNER JACKET : Inner Jacket Material: PVC - Polyvinyl Chloride Inner Jacket Nominal Wall Thickness: .014 in. Inner Jacket Diameter: .111 in. Inner Jacket Color Code Chart: Number Color 1 Brown 2 Red 3 Orange 4 Yellow 5 Green 6 Blue 7 Purple 8 Gray 9 White 10 Black 11 Tan 12 Pink 13 Gray/Brown 14 Gray/Red 15 Gray/Orange 16 Gray/Yellow 17 Gray/Green Number Color 18 Gray/Blue 19 Gray/Purple 20 Gray/Gray 21 Gray/White 22 Gray/Black 23 Gray/Tan 24 Gray/Pink 25 Blue/Brown 26 Blue/Red 27 Blue/Orange 28 Blue/Yellow 29 Blue/Green 30 Blue/Blue 31 Blue/Purple 32 Blue/Gray OUTER SHIELD : Outer Shield Material Trade Name: Beldfoil? Outer Shield Type: Tape Outer Shield Material: Aluminum Foil-Polyester Tape Outer Shield %Coverage: 100 % OUTER SHIELD DRAIN WIRE : Outer Shield Drain Wire AWG: 18 Outer Shield Drain Wire Stranding: 7x26 Outer Shield Drain Wire Conductor Material: TC - Tinned Copper OUTER JACKET : Outer Jacket Material: PVC - Polyvinyl Chloride Outer Jacket Nominal Wall Thickness: .070 in. Outer Jacket Ripcord: Yes OVERALL NOMINAL DIAMETER : Overall Nominal Diameter: .897 in. MECHANICAL CHARACTERISTICS : Operating Temperature Range: -35°C To +75°C Bulk Cable Weight: 337.1 lbs/1000 ft. Max. Recommended Pulling Tension: 550.4 lbs. Min. Bend Radius (Install): 8.75 in.
APPLICABLE SPECIFICATIONS AND AGENCY COMPLIANCE : APPLICABLE STANDARDS : NEC/(UL) Specification: CM CEC/C(UL) Specification: CM EU CE Mark (Y/N): Yes EU RoHS Compliant (Y/N): Yes EU RoHS Compliance Date (mm/dd/yyyy):: 01/01/2004 PLENUM/NON-PLENUM : Plenum (Y/N): N ELECTRICAL CHARACTERISTICS : Nom. Characteristic Impedance: 50 Ω Nom. Inductance: .18 ?H/ft Nom. Capacitance Conductor to Conductor @ 1 KHz: 31 pF/ft Nom. Cap. Cond. to Other Cond. & Shield @ 1 KHz: 58 pF/ft Nominal Velocity of Propagation: 66 % Nom. Conductor DC Resistance @ 20 Deg. C: 23.3 Ω/1000 ft Ind. Pair Nominal Shield DC Resistance @ 20 Deg. C: 15.9 Ω/1000 ft Max. Operating Voltage - UL: 300 V RMS Max. Recommended Current: 1.05 Amps per conductor @ 25°C NOTE:Price per meter |
Reviews
There are no reviews yet.