Content |
A P P L I C A T I O N Analogue audio Any analogue audio transmissions as well in fixed installations as on stage or broadcast These highly flexible multi-pairs are destined to mobile applications P R O D U C T A D V A N T A G E S High flexibility Transmission on important lengths due to 0,22 mm2 Facility of wiring thanks to conductors cross section colored and numbered pairs T E C H N I C A L D A T A NO. OF CONDUCTORS: No. x 2 x 0,22 mm2 Bare copper COMPOSITION: 28 x 0,10 mm CONDUCTOR INSULATION: Polyolefin SHIELDING BY PAIR: Bare copper spiral COLOR OF PAIR: See board JACKET: Black PVC PACKAGING: Per m SUITABLE PLUG: XLR, jack, cinch PRICE PER METER
| The DAP audio mulitpairs are extremely flexible and rugged, suitable for very difficult environments, Studio, Stage and above all in –on the road" use. The inner conductors are double colour coded and shielded with alufoil, each pair XLPE Isolated and numbered.
• Single shielded multicable
• colour coded
• Tough, roadproof quality
• Each pair OFC-copper shielded
1. Masterjacket: Dark blue flexible roadproof PVC
2. Separator: Twistet cotton paper
3. Pairjacket: Numbered dark-blue PVC 3 mmØ
4. Pairshield: Silvercoatet Alufoil
5. Conductor insulation: Polyethelene red and white 1mmØ
6. Inner conductor: Oxigene free copper 99,997 OFC
7. Earth drainwire: Tinned copper
Each pair with alu-foil (OFC Copper), with exception of MK-3222.
Min. orderquantuty: 1m.
Max. on drum: 500m.
Technical Info
Number of pairs: 36
Conductor insulation Ø in mm.: PE, red+white, 1,0
Pair jacket Ø in mm.: PVC blue, (numbered), 3,0
Pair shield: Alufoil+tinned drainwire
Master jacket Ø in mm.: PVC, dark blue, 26,5
Minimal bending radius: ?265
Weight (kg/100m.): 880 | BELDEN 70032 Audio multi cable 4 pairs | Adam Hall by Procab - power and audio cable Ø 14 mm
The PAC50 is a high quality signal and power cable in one jacket. This kind of cable is designed to fulfill all demands when using active loudspeakers. The cable consists of a power cable and a balanced signal cable. A general outer jacket with an O.D. of 14 mm and made of flexible PVC protects each inner cable against abrasion. The inner power cable contains 3 conductors with a section of 1.0 mm², protected by a PVC jacket with an O.D of 7 mm.
The signal section is balanced and contains two twisted inner conductors of 0.125 mm² with an excellent shielding to prevent any influence of hum, noise, radio interference and magnetic fields.
The signal section is also protected by an outer jacket of PVC with an O.D. of 3.5 mm. The PAC50 cable finds its application in mobile systems where power and signal are desired to be in one cable (active speaker systems).
TECHNICAL DATA:
- Art No.: KCPAC50
- Type of cable: Signal cable
- Containing: Power cable & audio cable
- Cover: cotton paper
- Outer jacket: Flexible PVC
- Outer jacket color: Black
- Outer jacket dimensions: Ø 14 mm
- Printing color: white
- Printing text: Procab PAC50
- Type of packing: wooden reel for 100 meter
MECHANICAL DATA:
- Temperature range fixed installation:
- Fixed installation: -40° C to +80° C
- Flexible installation: -25° C to +70° C
- Bending radius :
- Fixed installation: 8 x outer diameter
- Flexible installation: 10 x outer diameter
AUDIO CABLE:
- Type of cable: Signal cable
- Inner conductor: 2 x TC 7 x 0.15 mm
- Inner conductor section: 2 x 0.125 mm²
- Conductor twisting: Yes
- Isolation: PE , Ø 1,5 mm
- Shielding: TC 32 x 0.12 mm, spiral
- Shielding %: 100%
- Outer jacket: Flexible PVC
- Outer jacket color: grey
- Outer jacket dimensions: Ø 3,5 mm
- Lead resistance: 13.75 ohm - 100 meter
- Cable cross-talk: Min. 73.3 dB - 100 meter
- Capacitance lead to lead: 54 pF - meter 1 kHz
- Capacitance lead to Shielding: 98 pF - meter 1 kHz
POWER CABLE:
- Type of cable: Power cable
- Inner conductor: 3 x BC 58 x 0,15 mm
- Inner conductor section: 3 x 1 mm²
- Inner conductor color: green 6 yellow - blue - brown
- Outer jacket: Flexible PVC
- Outer jacket color: black
- Outer jacket dimensions: Ø 7 mm
- Lead resistance: 1.35 ohm - 100 meter
- Max. operation voltage: 450 Volt
- Max current: 10 amp
- Approval: CE
|
DAP-Audio PSC-211
Power/Signal Cable, price per m
Specifications
500M on spool price p/m Conductor drains Ø mm: OFC 20 x 0,10 (NF) & 3 x 1,5 (power) Conductor insulation: PE red+black & PVC black (power) Conductor insulation Ø: 1,3 mm (NF) Filler material: paper 1st shield: twisted copper NF 96 x 0,10 2nd shield: - Outer isolation: PVC 11mm, matte blue Conductor resistance: 80 Ohm/Km Shield resistance: 30 Ohm/Km Capacity Inner conductor: 60 pF/m Cap. Inner conduct. Shield/Inner conduct.: 78 pF/m Working temperature: -20~60 °C (min./max.) Working Voltage overflash: 30V Nom Impedance: 110 Ohm |
REF : CC KX6-375P2
Quality Cable
PRICE PER METER
High Quality AUDIO(or DATA) – VIDEO – POWER CABLE MADE IN FRANCE
Composite cable: 1 coaxial cable 75 Ω (KX6) + 2 shielded data pairs 0.34 mm² + 3G0.75 mm² feeders. Black PVC outer sheath.
Construction
COAXIAL CABLE:
- INNER CONDUCTOR: stranded bare copper (7 x 0.20 mm nom.)
- DIELECTRIC: Foam PE (Ø = 3.70 mm nom.)
- SHIELD: copper braid (Coverage > 69%)
- SHEATH: green or black PVC Ø = 6.15 mm nom.
DATA PAIRS:
- CORE: bare copper 0.34 mm²
- INSULATION: PE - Ø = 1.15 mm nom.
- COLOUR: blue and white
- SHIELD: tinned copper drain wire + Al/PES tape.
- SHEATH: blue PVC - Ø = 3.0 mm
POWER CABLE:
- CORE: flexible stranded bare copper S = 0.75 mm².
- INSULATION: PVC- Ø = 2.1 mm nom.
- COLOUR: black – red – green/yellow
- SHEATH: grey PVC - Øext = 6.10 mm nom.
GENERAL ASSEMBLY: {1 coaxial cable 75 Ω + 2 pairs 0.34 mm² + 1 cable 3G0.75 mm²} + synthetic fillers under a PES tape + rip cord.
MARKING: CC KX6-375P2 + Batch number
Electrical properties
COAXIAL CABLE:
Inner conductor electrical resistance:
Outer conductor electrical resistance:
Impedance @ 200 MHz: 75 ± 3 Ω.
Capacitance: 67 pF/m nom.
Attenuation at 20°C:
Velocity of propagation: 66 %
DATA PAIRS:
Operating voltage: 100 V.
Electrical resistance at 20°C:
Test voltage (1 min. / 50 Hz): 1500 V
Mutual capacitance: 125 pF/m nom.
POWER CABLE:
Operating voltage: 230 V
Test voltage: 2000 V
Electrical resistance at 20°C:
Insulation resistance: > 100 MΩ.km
Working temperature: - 20°C Æ +70 °C
Acc. to the RoHS standard
Fire behaviour:
C2 acc. to IEC 60332-1 / NFC32070
|
Reviews
There are no reviews yet.