AKG C 520 Headworn Cardioid Condenser Vocal Microphone

Features:

* Head-worn microphone with continuously adjustable behind-the-neck headband
* External shock mount for high mechanical-noise rejection
* Miniature gooseneck for precise positioning near the user's mouth
* Microphone arm provides choice of left or right-hand use

Specifications:

* Polar pattern: cardioid
* Frequency range: 60 Hz to 20 kHz
* Sensitivity: 5 mV/Pa (-46 dBV)
* Max. SPL: 130 dB/132 dB (for THD = 1 %/3 %)
* Equivalent noise level: 31 dB-A
* Signal/noise ratio (A-weighted): 63 dB
* Impedance: = 2000 ohms
* Power requirement: 9 to 52 V phantom power to DIN 45596 or battery powering from B 29 L, or AKG bodypack transmitter
* Connector: C 520: 3-pin male XLR; C 520 L: 3-pin mini XLR
* Cable: C 520: 3 m (10 ft.); C 520 L: 1.5 m (5 ft.)
* Finish: matte black
* Dimensions: length: 195 mm (7.7 in.) (microphone only); max. diameter: 134 mm (5.3 in.)
* Net weight: 26 g (0.9 oz.)
* Shipping weight: C 520: 380 g (13.4 oz.); C 520 L: 260 g (9.2 oz.)

• Type: condenser
• Directional characteristic: cardioid
• Frequency response: 70–16,000 Hz
• Nominal impedance: 1.4 kOhm

The AKG C520L is a head-worn condenser microphone with maximum dynamic range for perfect vocal sound.

The AKG C520L can be used with the B 29 L battery power supply, AKG WMS Series bodypack transmitters, or the MPA V L adapter for external phantom powering.

The AKG C520L is an ideal choice for frontmen, singing keyboardists, drummers, guitarists, and dancers. The microphone arm mounts either on the left or right side of the headband as desired. Its cardioid polar pattern effectively rejects unwanted ambient noise. The C 520 provides the perfect solution for any performer needing a handsfree microphone.

A transducer shock mount reduces handling noise to a minimum. The moisture shield prevents perspiration from penetrating into the transducer element, ensuring a high degree of humidity protection for the microphone.

AKG C520L main features include:

• Head-worn microphone with continuously adjustable behind-the-neck headband
• External shock mount for high mechanical-noise rejection
• Miniature gooseneck for precise positioning near the user's mouth
• Microphone arm provides choice of left or right-hand use
• Polar pattern: cardioid
• Frequency range: 60 Hz to 20 kHz
• Sensitivity: 5 mV/Pa (-46 dBV)
• Max. SPL: 130 dB/132 dB (for THD = 1 %/3 %)
• Equivalent noise level: 31 dB-A
• Impedance: = 2000 ohms
• Connector:3-pin mini XLR
• Cable: C 520 L: 1.5 m (5 ft.)
• Finish: matte black
• Dimensions: length: 195 mm (7.7 in.) (microphone only); max. diameter: 134 mm (5.3 in.)
• Net weight: 26 g (0.9 oz.)

High-quality permanently polarized condenser headmic with omni-directional pick-up pattern

• Uni-directional Electret Condenser Headset Microphone
• Impedance
• Frequency range : 20Hz - 20 KHz
• Sensitivity : -44 ± 2 dB (at 1 KHz)

Transducer     Condenser
Polar Pattern     Omnidirectional
Frequency Response     30Hz to 20kHz +/- 3dB
Dynamic Range (Typical)     Not Specified by Manufacturer
Signal-to-Noise Ratio     Equivalent Acoustic Noise: 29dBA SPL
Maximum Input Sound Level     130dB SPL
Power Requirements     Operating Current: 500uA
Operating Voltage: 1 to 2V
Power Supply Voltage:
+3V with 2.7k ohm Load
+5V with 6.8k ohm Load
+9V with 15k ohm Load
Output Impedance     2k ohms
Output Connectors     TA4-Female Connector for Shure Wireless Transmitters
Dimensions     Not Specified by Manufacturer
Weight     0.07 oz (2g)