FBT J15A Active Speaker 2-way 450W

592.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line.  The new J series is a competitive, value for money range of speakers. The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W […]

 

Read more

The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line.  The new J series is a competitive, value for money range of speakers.
The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A. 

These amplifiers have been designed \’from the ground up\’ in FBT’s R&D laboratories.
The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets.

The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing.

The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity.

 

Following from the new J series, FBT bring you the DJ 15A, designed with today’s modern DJ in mind.  The DJ 15A has invaluable features allowing quality audio playback using our revolutionary DSP technology.  This includes 4 presets enabling the DJ to change the sound of their music to suit the environment they play within.

These DSP presets will allow the DJs audience to enjoy improved sound quality and SPL, especially in bass reproduction at high volume.

The DJ 15A also has another useful feature for DJs, including a two channel input mixer allowing the DJ to plug a music source and microphone direct into the speaker, giving separate control over volume for both devices.  You can also daisy chain these speaker together if required.  Ideal for many application of today’s modern DJ.

Processed Active Monitor

350W+ 100W RMS – 129dB SPL

  • 380mm (15’’) custom woofer with improved efficiency and linearity
  • 350Wrms class D amplifier for LF and 100Wrms for HF.
  • High efficiency switch mode power supply
  • On-board Digital Signal processing with dynamic equalizations and protections for high SPL and high reliability.
  • 4 DSP preset for maximum acoustical flexibility
Weight 15.00 kg

Reviews

There are no reviews yet.

Be the first to review “FBT J15A Active Speaker 2-way 450W”

Your email address will not be published. Required fields are marked *

Quick Comparison

FBT J15A Active Speaker 2-way 450W removeDYNACORD A115A 2WAY 15'' ACTIVE LOUDSPEAKER 500W removeJBL VP7315-64DPAN Powered 15'' 3-way 1100W RMS Loudspeaker System removeMONTARBO SPOT1500 ACTIVE SPOT 15'' 1500W removeELECTRO VOICE ETX-15P POWERED LOUDSPEAKER 2 WAY 2000W removeELECTRO VOICE ETX-35P POWERED LOUDSPEAKER 3 WAY 2000W remove
NameFBT J15A Active Speaker 2-way 450W removeDYNACORD A115A 2WAY 15'' ACTIVE LOUDSPEAKER 500W removeJBL VP7315-64DPAN Powered 15'' 3-way 1100W RMS Loudspeaker System removeMONTARBO SPOT1500 ACTIVE SPOT 15'' 1500W removeELECTRO VOICE ETX-15P POWERED LOUDSPEAKER 2 WAY 2000W removeELECTRO VOICE ETX-35P POWERED LOUDSPEAKER 3 WAY 2000W remove
Image
SKUFBT00051E009289VP 7315-DP64PMONTARBO SPOT1500E006032E006033
Rating
Price592.00 incl. GR VAT 943.00 incl. GR VAT 8,325.00 incl. GR VAT 2,592.84 incl. GR VAT 1,599.00 incl. GR VAT 1,733.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line.  The new J series is a competitive, value for money range of speakers.
The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A. 

These amplifiers have been designed \'from the ground up\' in FBT’s R&D laboratories.
The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets.

The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing.

The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity.

 

Following from the new J series, FBT bring you the DJ 15A, designed with today’s modern DJ in mind.  The DJ 15A has invaluable features allowing quality audio playback using our revolutionary DSP technology.  This includes 4 presets enabling the DJ to change the sound of their music to suit the environment they play within.

These DSP presets will allow the DJs audience to enjoy improved sound quality and SPL, especially in bass reproduction at high volume.

The DJ 15A also has another useful feature for DJs, including a two channel input mixer allowing the DJ to plug a music source and microphone direct into the speaker, giving separate control over volume for both devices.  You can also daisy chain these speaker together if required.  Ideal for many application of today’s modern DJ.

Processed Active Monitor

350W+ 100W RMS - 129dB SPL

  • 380mm (15’’) custom woofer with improved efficiency and linearity
  • 350Wrms class D amplifier for LF and 100Wrms for HF.
  • High efficiency switch mode power supply
  • On-board Digital Signal processing with dynamic equalizations and protections for high SPL and high reliability.
  • 4 DSP preset for maximum acoustical flexibility

Features:

    DH-1K 1.5-inch Titanium Diaphragm Compression Driver
    EVS-15K 15-inch Woofer
    124 dB max. SPL
    500 W Class-D Amplifier
    Integrated DSP with FIR filter


Cabinet
Powered two-way full-range speaker, 15" woofer, 1.5" compression driver, vented design
Maximum Amplifier Output Capability, IHF-A
500 W
Amplifier Power RMS
420 W
Max. SPL 1m / calc.
124 dB
Frequency Range (-10 dB)
50 Hz to 17 kHz
Nominal Coverage Angle
90° x 50° (Horizontal x Vertical)
Audio Input (LINE 1 or MIC/LINE 2)
XLR and 1/4" TRS combination
Audio Input (AUX)
Stereo RCA, unbalanced
Audio Output (LINK OUTPUT)
XLR, balanced
Digital Signal Processing
28/56-Bit, 48 kHz
Crossover Frequency
1.7 kHz
Product Dimensions (W x H x D)
708 x 432 x 382 mm
Net Weight
22.5 kg
Optional Accessories
---
SH-115A, Dust Cover
F01U270396
VPM 1500, variable speaker pole
F01U141047
BS 35, speaker stand
F01U141046

JBL VP7315-64DPAN Powered 15'' 3-way 1100W RMS Loudspeaker System

Key Features :
 
Powered bi-amplified full-range loudspeaker with JBL DrivePack? technology for portable or installed use.

2200 Watts peak output power, 1100 Watts continuous.

HiQnet? compatible; network control.

15-inch Differential Drive? low-frequency driver for
extended low-frequency output.

60° x 40°coverage.

Stylized and ergonomically designed powder-coated
die cast aluminum handles.

Six 3-inch fly track suspension points and fourteen M10
fittings (optional detachable flying fittings and forged eye
bolt kits available).

Optional DPCN (CobraNet?) digital audio input
module available.
 
Specifications:

Frequency Range

:

34 Hz to 20 kHz (-10 dB)

Frequency Response

:

43 Hz to 18 kHz ( ± 3 dB)

Coverage Pattern

:

60°x 40° rotatable waveguide

Directivity Factor (Q)

:

15.85

Directivity Index (DI)

:

12 dB

Maximum Peak Output1

:

138 dB SPL 1m

Transducer Section

   

Low Frequency Section

:

JBL 2265G, 381mm (15 in) dia.,
76mm (3 in) Dual Coil neodymium Differential Drive?, Direct Cooled

Bandpass
Nominal Impedance

:

4 ohms

Mid/High
Frequency Section

:

 

Mid Frequency

:

JBL CMCD-82H, 200mm (8in)
Dual Coil Differential? transducer

High Frequency

:

JBL2452H-SL, 100mm (4in) titanium damped diaphragm, 1.5in. exit

Waveguide

:

JBL PT-K64-MHF

Bandpass
Nominal Impedance

:

8 ohms

System

 

DP2 Internal
Amplification Output
(at nominal load)

:

2200 Watts Peak,
1100 Watts Continuous

DP2 Output (Continuous
IEC shaped pink
noise into rated
load impedance)

:

750LF/350HF Watts

DP2 Output Section

:

2-Channel, Class I

Audio Input connector:

:

XLR with loop-through

Network
Control Connector

:

Ethernet, RJ45

Signal Processing

:

DSP Based, resident in
Input Module

System Management

:

DSP based limiters for mechanical
and thermal protection

AC Power
Operating Range

:

Auto Select 90-132VAC/
216-264VAC, 50/60Hz

AC Line Voltage

:

50/60 Hz, Auto-Detect; 120V/
240V (-15%, +10%)

AC Input Connector

:

Neutrik PowerCon

AC Loop-Thru

:

Neutrik PowerCon

AC Current Requirement

:

6A per system at 120V, 3A per
system at 240V

Enclosure

 

Box Construction

:

5/8in. multi-ply exterior grade
Baltic birch. Internally braced.
Black DuraFlex? finish.

Suspension System

:

6 standard air-cargo 3 in. track
and 12 M10 fittings

Grille

:

14 Gauge Black powder-coated
perforated steel with foam backing

Dimensions
(H x W x D)

:

914.4 x 528.3 x 624.8mm
(36 x 20.8 x 24.6 in)

Net Weight

:

44 kg (97 lb)

Two-way active full range with DSP. 1500W

15'' woofer, 3'' driver, 50 x 40 dispersion.

1000W + 500W class D power amplifier.

Optional: LD2.4 USB interface for remote PC connection.

CV-Spot protective cover. NOTE : SPOT 1500 can not drive the bass cabinet SPOT15B.

 

The new ETX Powered Loudspeakers family builds upon the industry-leading innovation and 85-year heritage of Electro-Voice audio engineering to offer the most advanced professional portable powered loudspeakers available today.
A versatile high-end choice for live entertainment venues, rental companies, pro musicians and DJs, and installed sound, the ETX Powered Loudspeakers family features three two-way models (10-inch, 12-inch and 15-inch, all with a precision HF titanium compression driver), a three-way model (15-inch with a 6.5-inch MF driver and a precision HF titanium compression driver) and two subs (15-inch and 18-inch drivers).
Positioned above the ZLX and Live X families respectively, ETX Powered Loudspeakers complete a trio of recent EV portable loudspeaker offerings-each of which was designed to bring best-in-class performance to its price point.
Inside each low-profile, tour-grade wood enclosure are a host of unique new features that set ETX Powered Loudspeakers apart, combining intelligent technology and innovative industrial design for spectacular results across all applications. EV-engineered high-efficiency transducers and high-powered Class-D amplifiers, Signal Synchronized Transducers (SST) waveguide design and smart FIR-Drive DSP all work together to provide peerless EV sound quality and precise coverage at the highest SPLs.


  • 15-inch LF SMX woofer
  • 1.25-inch HF titanium compression driver
  • 2000 W Class-D power amplifier with integrated FIR-Drive DSP
  • 135 dB peak SPL
Frequency Range 40 Hz - 20 kHz
Maximum SPL 135 dB peak dB
Power Consumption 100 - 240 V~, 50 - 60 Hz, 1.6 - 0.8 A
Power Rating 2000 W
Frequency Response 48 Hz - 20 kHz
Coverage (Nominal -6 dB) H 90 °
Coverage (Nominal -6 dB) V 60 °
LF Transducer SMX2150 380 mm (15 in)
HF Transducer DH3-B 1.25-in titanium compression driver
Crossover Frequency 1500 Hz
Connector Type (2) XLR/TRS combo jack and (1) XLR link output
Enclosure Material 18-mm, 13-ply birch plywood with EVCoat
Grill 16AWG steel with powdercoat
Suspension (8) M10 suspension points
Height 691 mm (27.2“)
Width 431 mm (16.97“)
Depth 447 mm (17.6“)
Weight Net 27.7 kg (61.07 lbs)
Shipping Weight 31.5 kg (69.45 lbs)

The new ETX Powered Loudspeakers family builds upon the industry-leading innovation and 85-year heritage of Electro-Voice audio engineering to offer the most advanced professional portable powered loudspeakers available today.
A versatile high-end choice for live entertainment venues, rental companies, pro musicians and DJs, and installed sound, the ETX Powered Loudspeakers family features three two-way models (10-inch, 12-inch and 15-inch, all with a precision HF titanium compression driver), a three-way model (15-inch with a 6.5-inch MF driver and a precision HF titanium compression driver) and two subs (15-inch and 18-inch drivers).
Positioned above the ZLX and Live X families respectively, ETX Powered Loudspeakers complete a trio of recent EV portable loudspeaker offerings-each of which was designed to bring best-in-class performance to its price point.
Inside each low-profile, tour-grade wood enclosure are a host of unique new features that set ETX Powered Loudspeakers apart, combining intelligent technology and innovative industrial design for spectacular results across all applications. EV-engineered high-efficiency transducers and high-powered Class-D amplifiers, Signal Synchronized Transducers (SST) waveguide design and smart FIR-Drive DSP all work together to provide peerless EV sound quality and precise coverage at the highest SPLs.


  • 15-inch LF SMX woofer
  • 6.5-inch MF driver
  • 1.25-inch HF titanium compression driver
  • 2000 W Class-D power amplifier with integrated FIR-Drive DSP
  • 136 dB peak SPL
Frequency Range 38 Hz - 20 kHz
Maximum SPL 136 peak dB
Power Consumption 100 - 240 V~, 50 - 60 Hz, 1.6 - 0.8 A
Power Rating 2000 W
Frequency Response 48 Hz - 20 kHz
Coverage (Nominal -6 dB) H 60 °
Coverage (Nominal -6 dB) V 40 °
LF Transducer SMX2151 380 mm (15 in)
MF Transducer EVS-6C 6.5-in midbass driver
HF Transducer DH3-B 1.25-in titanium compression driver
Crossover Frequency 700 Hz, 2900 Hz
Connector Type (2) XLR/TRS combo jack and (1) XLR link output
Enclosure Material 18-mm, 13-ply birch plywood with EVCoat
Grill 16AWG steel with powdercoat
Suspension (8) M10 suspension points
Height 1023 mm (40.28“)
Width 469 mm (18.46“)
Depth 426 mm (16.77“)
Weight Net 41.7 kg (91.93 lbs)
Shipping Weight 46.8 kg (103.18 lbs)
Weight15.00 kg25.00 kg44.00 kg15.00 kg31.50 kg46.80 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 15.00 kg
Weight 25.00 kg
Weight 44.00 kg
Weight 15.00 kg
Weight 31.50 kg
Weight 46.80 kg