Pro-Ject Phono Box USBMM/MC Phono preamp with line & USB outputs

• Input impedance, MM 47kohms/120pF
• Input impedance, MC 100ohms/120pF
• Gain, MM 40dB
• Output voltage typically 300mV/1kHz at 3mV/1kHz (MM input)
• Gain, MC 60dB
• Output voltage typically 300mV/1kHz at 0,3mV/1kHz (MC input)
• Max. output 9,5V (1kHz)
• Noise floor, MM 86dB (94dB - A weighted)
• Noise floor, MC 68dB (75dB - A weighted)
• THD, MM 0,01%
• THD, MC 0,05%
• RIAA-equalisation curve accuracy 20Hz - 20kHz / max. 0,5dB
• A/D converter -Bit Delta Sigma
• USB output digital serial data protocol USB 1.1
• Operating systems Windows®, MacOS® and Linux®
• THD: 0.005% - Noise floor: 96dB - Dynamic range: 93dB - Outboard power supply: 16V/200mA AC, suitable for your country's mains supply
• Power consumption: 16V/100mA AC -Dimension W x H x D: 103 x 38 x 115mm - Weight: 570g without power supply

Manual/Εγχειρίδιο

SILVER
 
Bandwidth 5Hz to 90kHz, -3dB Maximum output
voltage 8.5Vrms (47 kOhm load)
Overall gain 40dB-60dB @ 1kHz selectable with
dip- switch.
Input Impedance 29 Ohm - 100 kOhm selectable
with dip-switch.Selectable input Capacitance.
Input Unbalanced 1 pair x channel (RCA)WBT
Output Unbalanced(RCA)WBT - MM,
high output
MC, low output MC.
Handmade Litz cable for this specific application
from White Gold. JFET differential built around Toshiba 2SK170 among the most noiseless transistor of the current production.

Azur 851C Upsampling DAC, CD Player and Digital Pre-amplifier Features

Digital to Analogue Converter featuring S/PDIF and Toslink digital inputs, AES/EBU balanced digital input and USB audio inputs (all 24 bit compatible)
CD playback
Optional digital volume and channel balance control
Balanced XLR and unbalanced RCA analogue audio outputs
USB Audio input allowing streaming of up to 24-bit/192kHz audio from computer
ATF2™ audio up-sampling to 24-bit/384kHz
Twin Analog Devices AD1955 24 bit DACs delivering superior sound-staging and stereo imaging
Selectable digital filters – linear phase, minimum phase, steep
Audiophile grade toroidal transformer delivering ultra-low low noise and distortion
Full metal casework design with thick brushed aluminium front panel and dual layer damped feet, giving enhanced resonance control
RS232 controllable
Eco-friendly Azur Navigator remote control with Cambridge Audio amplifier and iPod dock control
Available in black and silver finishes

WITH INTEGRATED ANALOGUE-TO-DIGITAL CONVERTER

Both Microsoft® Windows® and Apple® Mac OS® come with very simple audio recording software pre-installed. However, to take full advantage of the high-resolution recording facilities offered by the MM 008 ADC, we recommend recording software that can record at 24 bits/96 kHz and save lossless high-resolution audio files such as FLAC or Apple® Lossless.

Thorens turntables can be considered state-of-the-art in hi-fi technology as they would extract even the most minute details from your precious vinyl records. The signals generated by the pickup cartridges are however very small and therefore must be amplified to a much higher level. Regrettably, most of today’s amplifiers are no longer equipped with a dedicated phono stage. This unfortunate situation was a good reason for Thorens to develop the TEP 302, a complete phono preamplifier including RIAA equalization, which was to complement the outstanding playback performance of our turntables.

The TEP 302 is a pure-bred Class-A amplifier which employs selected, very special low-noise operational amplifiers throughout. The circuitry has been optimized "by ear” after several extended listening sessions. Of course, the TEP 302 also features a 15-Hz subsonic filter in order to protect the woofers from dangerous excursions when a warped record is played. More details, more dynamics.

• Mode: MM/MC (switchable)
• Gain at 1 kHz: 40 dB (MM)/60 dB (MC)
• Input impedance (MM): 47 kΩ + 220 pF fixed
• Input impedance (MC): 47 kΩ + 1 nF (modifiable with external load plugs)
• Frequency response (flat): 20 Hz - 20 kHz ±0.3 dB
• Frequency response (-3 dB): 10 Hz - 50 kHz
• RIAA curve accuracy: ±0.3 dB
• THD+N: 72 dB (MC)
• Crosstalk: ≧40 dB
• Input sensitivity (MM): 3.29 mVrms for -10 dBV output (316 mVrms)
• Input sensitivity (MC): 0.325 mVrms for -10 dBV output (316 mVrms)
• Max. output voltage: 482 mVrms at 5 mVrms input (1 kHz)
• Output impedance: 47 Ω
• Input connections: 3 pairs of RCA sockets (left/right)
• Output connections: 1 pair of RCA sockets (left/right)
• Power supply: 24 V DC
• Power consumption: 3.5 W/15 mA
• Weight: 511 g (not including power supply)
• Dimensions (W x H x D): 150 x 50 x 117 mm
• A/D converter: Tenor TE7022L 24Bit Delta Sigma
• Sampling rates: 8,16, 32, 44.1, 48, 96 kHz
• USB output: USB 2.0, fully backward-compatible with USB 1.1
• Operating systems: Windows® 8, Windows® 7, Vista, XP, Mac OS®

Backed by the combined technological prowess of multiple HARMAN brands, the JBL Commercial Series Mixers (CSM) deliver unsurpassed quality in commercial sound. Easily configured for a range of applications, such as background music, security, and paging, CSM units are designed for everything from schools and hospitals to restaurants and fitness facilities. They feature RJ45 connectors for use with JBLCSR-V in-wall volume controls, and a universal power supply that accepts AC voltages from 100 to 240 VAC, 50/60 Hz. Plus, theyʼre built using HARMANʼs GreenEdge clean standards to offer numerous energy-efficient benefits, including a lighter weight, space-saving design, and conforming to RoHS standards. 4 or 8 inputs with 1 or 2 channel outputs Fanless, space-saving 1U design Independent base/treble controls Euro-block type mic/line input and output connectors, and unbalanced RCA inputs for consumer connection Sleek industrial look with illuminated rings making them easy to see and use Configurable output routing (2 channel models only) Supports JBL CSR-V wall controller via Ethernet cable Priority muting, VOX ducking, and phantom power for all models