Content |
The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line. The new J series is a competitive, value for money range of speakers. The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A.
These amplifiers have been designed 'from the ground up' in FBT’s R&D laboratories. The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets.
The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing.
The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity.
Following from the new J series, FBT bring you the DJ 15A, designed with today’s modern DJ in mind. The DJ 15A has invaluable features allowing quality audio playback using our revolutionary DSP technology. This includes 4 presets enabling the DJ to change the sound of their music to suit the environment they play within.
These DSP presets will allow the DJs audience to enjoy improved sound quality and SPL, especially in bass reproduction at high volume.
The DJ 15A also has another useful feature for DJs, including a two channel input mixer allowing the DJ to plug a music source and microphone direct into the speaker, giving separate control over volume for both devices. You can also daisy chain these speaker together if required. Ideal for many application of today’s modern DJ.
Code: |
37714 |
Configuration: |
2 way |
Built-in amplifier LF/HF: |
350/100 W RMS |
Built-in amplifier peak LF/HF: |
700/200 W |
Frequency response: |
50Hz - 20KHz -6dB |
Low Frequency woofer: |
12 - 2 coil inch |
High Frequency driver: |
1 -1 coil inch |
Maximum SPL cont/peak: |
124/128 dB |
Dispersion: |
90° x 60° HxV |
Input impedance: |
22 Kohm |
Crossover Frequency: |
2 KHz |
AC Power requirements: |
400 VA |
Input connector: |
XLR - jack with loop |
Power cord: |
5 / 16.4 m/ft |
Net Dimension (WxHxD): |
410x663x387 - 16.14x26.10x15.23 mm/inch |
Net Weight: |
13.7 / 30.2 Kg/lb |
Transport Dimension (WxHxD): |
495x740x475 - 19.48x29.13x18.70 mm/inch |
Transport Weight: |
16.8 / 37.03 Kg/lb |
|
Specification Detail
Powered Yes
Power Configuration Bi-amped
LF Driver Size 12“
LF Driver Power Amp 500W Class D
HF Driver Size 1.75“
HF Driver Power Amp 500W Class D
Frequency Range 50Hz-20kHz (-10dB)
Crossover Frequency 2kHz
Maximum Peak SPL 131dB
Horizontal Coverage Angle 75 Degrees Axisymmetric
Vertical Coverage Angle 75 Degrees Axisymmetric
Enclosure Material 15mm Birch Plywood
Mounting Options Pole, Floor Wedge, Fly
Inputs 1 x Combo (XLR/TRS, Mic/Line), 1 x Combo (XLR/TRS, Line), 2 x RCA
Outputs 2 x XLR (Direct), 1 x XLR (Line)
Height 26“
Width 15“
Depth 15.4“
Weight 49 lbs.
Manufacturer Part Number KW122
|
The DBR12 represents a perfect balance of size and performance, with 1000W of power and outstanding resolution at any output level. Ideal for front-of-house, floor monitoring applications or even the stage side fills, the DBR12 is an ideal choice for a wide range of applications. |
Key Features:
- Compact Powered bi-amplified
full-range loudspeaker with JBL
DrivePack® technology for portable or
installed use
- Optimized for both portable/rental or
permanent-venue use
- 1750 watts peak output power,
875 watts continuous
- 12-inch Differential Drive® lowfrequency
driver for extended lowfrequency
output
- Robust powder-coated die cast
aluminum handles, designed for
strength and comfort
- Integrated 35 mm stand mount
Specifications:
Frequency Response (+/-3 dB): 65 Hz - 18 kHz80 Hz – 20 kHz
Frequency Range (-10 dB): 55 Hz - 20 kHz50 Hz – 20 kHz
Coverage Pattern: 90° x 50°
Directivity Factor (Q): 12.6
Directivity Index (DI): 11 dB
Maximum Peak Output1: 134 dB SPL 1m
Transducer Section:
Low Frequency Section: JBL 2262FF, 304 mm (12 in) dia., 76 mm (3 in) Dual Coil
neodymium Differential Drive®, Direct Cooled
Bandpass Nominal Impedance: 2 x 2 ohms
High Frequency: JBL 2452H-SL, 100 mm (4 in) titanium damped
diaphragm, 1.5 in. exit.
Bandpass Nominal Impedance: 8 ohms
System:
DPC1 Internal Amplification Output
(at nominal load) 1750 Watts Peak, 875 Watts Continuous
DPC1 Output (Continuous IEC shaped
pink noise into rated load impedance): 750LF/125HF Watts
DPC1 Output Section: LF: Dual Bridged Technology™, Class D
HF: Bridged Class D
Audio Input connector XLR with loop-through
User Controls: 80 Hz Subwoofer High Pass Filter. Enable/Disable
0-16 dB input Attenuator with 32 precision 0.5 dB steps
Signal Processing: DSP based, resident in Input Module.
System Management: DSP based limiters for mechanical and thermal
protection
AC Power Operating Range: 90-132 VAC/216-264 VAC, 50/60 Hz
AC Line Voltage: 50/60 Hz; User Selectable; 120V/240V (-15%, +10%)
AC Input Connector: Neutrik PowerCon (NAC 3MPA)
AC Loop-thru: Neutrik PowerCon (NAC 3MPB)
AC Current Requirement: 6A per system at 120V, 3A per system at 240V
Enclosure:
Box Construction: 5/8 in. multi-ply exterior grade Baltic birch. Internally
braced. Black DuraFlex™ finish.
Suspension System: 9 M10 Fittings + 2 M6 Fittings, 35 mm pole mount
socket
Grille: 14 Gauge Black powder-coated perforated steel with
foam backing.
Dimensions (H x W x D): 533 x 358 x 334 mm
21.0 x 14.1 x 13.1 in
Net Weight: 21.3 kg (47 lb)
|
The tops of the LDBLOCKX Power Tower are fitted with 12" custom made midrange speakers and a 1" Celestion Driver, they are driven by a 450 W RMS Bi-Amp amplifier producing a maximum sound pressure level of 128 dB.
Specifications LD Block X 12" Topteil Active: - Model Name: LDATOP12
- Type: Bassreflex
- Components:
- Woofer: 12" Custom Made
- Compression Driver: 1" Custom Made
- Amplification: Class A / B (Bi-Amp)
- Dispersion: 60° x 40°
- Power (RMS): 350 W + 100 W
- Frequency Range: 80 Hz - 20 kHz
- SPL (1 W/ 1 m): 101 dB
- Max SPL: 128 dB
- Protection: Limiter, Thermal, DC, Short circuit, HF
- Controls: Main Volume, Tweeter Volume, switchable High Pass (80 / 120 Hz), On/Off Switch
- Indicators: Power, Limiter, Signal, Protect
- Connectors:
- Input: Line: XLR + Jack 6,3mm (Combo)
- Output: Line: XLR
- Power Supply: Transformer
- Cabinet Material: 15 mm Plywood
- Cabinet Surface: Painting
- Dimensions (W x H x D): 450 x 500 x 520 mm
- Features: Ergonomic milled handles
| Product Features:
- High-Power 1000-Watt 2-way PA sound reinforcement speaker system for live and playback applications
- Ultra-compact and lightweight system delivers excellent sound even at extreme sound pressure levels
- High-performance MP3 player included to play audio files via USB stick
- “Wireless-ready" for high-quality BEHRINGER digital wireless system (not included)
- 2-channel mixer with individual Mic/Line inputs (XLR and 1/4" TRS), Volume controls and Clip LEDs
- Dedicated 2-band EQ plus integrated sound processor for ultimate system control and speaker protection
- Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
- Extremely powerful 12'' long-excursion driver provides incredibly deep bass and acoustic power
- state-of-the-art 1" phenolic-diaphragm compression driver for exceptional high-frequency reproduction
- Ultra-wide dispersion, large-format exponential horn
- Additional Line output allows linking of additional speaker systems
- Versatile trapezoidal enclosure design allows different positioning:
- - Stand mounting with 35-mm pole socket
- - Tilts on its side for use as a floor monitor
- Ergonomically shaped handles for easy carrying and setup
- High-quality components and exceptionally rugged construction ensure long life
User's Manual |
Reviews
There are no reviews yet.