| Content | In this era of digital audio, more and more musicians, engineers and producers are longing for
the warm, full-bodied sound produced by vacuum tubes. Say hello to the all-new TP-2. In one
rugged and compact unit, the TP-2 combines a dual channel tube preamp, optical compression
and digital outputs ? a total solution for your demanding audio applications.
Two for one!
The TP-2 offers two completely independent preamps, with individual realtime controls. Each channel
is driven by its own 12AX7 tube. A ?Stereo? switch on the front panel allows both preamps to work in
tandem when processing a stereo source.
Full-featured mic preamps
Using a specially tuned version of the Valve Force technology so widely acclaimed in the Electribe X
series and the TRITON Extreme, the new TP-2 tube-driven preamp imparts a robust warmth and a rich
musical character that is ideal for your critical and challenging acoustic sources. Each preamp channel
accepts either XLR or 1/4" TRS inputs, and switchable phantom power is provided. Equipped with a Hi-Z
switch, 26dB pad button and a variable trim knob, the TP-2 assures the optimal gain setting for any source,
from a premium microphone to a direct bass or guitar signal. A pair of faders controls the output level,
and a low-cut switch and a phase reverse button offer even more flexibility.
Transparent optical compression
By using state-of-the-art optical compression, the TP-2 is able to respond quickly, breathing life and luster
into your sound. In addition to enhanced response times, optical compression provides a wide range of
dynamic control ? without coloring the source material in adverse ways. Compression sensitivity knobs on
the front panel are teamed with Fast/Slow release time buttons and audiophile analog VU meters for intuitive
realtime control.
Best of both worlds
While the TP-2 works hard in the analog domain to achieve warm, smooth and musical results, its digital
characteristics are no less stellar. Analog-to-digital conversion is 24-bit, using 64-times oversampling for
error-free reproduction. Sampling rates of 44.1, 48 and 96 kHz are offered, and the digital output is provided
in both S/P DIF optical and coaxial formats. Analog outputs are also provided.
Use it anywhere
While the TP-2 is obviously well suited to enrich your hardware or software based digital recordings, it is
perfect for a variety of applications. Live, the TP-2 can be used to add warmth to any vocal mic or acoustic
instrument. As a mastering tool, the TP-2 provides superior dynamic control. You can even use it as a preamp
when preparing audio samples for your keyboard or computer.
XD series plug-in version
For those of you who are already using Korg?s D32XD or D16XD Digital Recording Studios, the full functionality
and feature set of the TP-2 is available as an optional enhancement for these Xtended Definition recorders in the
TPB-2. The TPB-2 mounts directly into the option bay on the D16XD or D32XD front panel.
SPECIFICATIONS:
Input connector:
XLR-3-31 type (+48 V phantom power, switchable),
1/4 TRS phone jack (balanced, unbalanced when Hi-Z is On)
Input impedance:
4k Ohms (XLR-3-31), 10k Ohms (TRS phone Jack),
1M Ohms (TRS phone Jack Hi-Z)
Input level:
-60dBu ~ -12dBu @ TRIM = max. ~ min., PAD OFF
-34dBu ~ +14dBu @ TRIM = max. ~ min., PAD ON
Max. level:
-48dBu ~ 0dBu @ TRIM = max. ~ min., PAD OFF
-22dBu ~ +12dBu @ TRIM = max. ~ min., PAD ON
in Hi-Z
-48dBu ~ 0dBu @ TRIM = max. ~ min., PAD OFF
-22dBu ~ +12dBu @ TRIM = max. ~ min., PAD ON
Source impedance: 600 ohm
Tube: 12AX7
Method of compression:
Vacuum tube gain reduction using a photocoupler
Frequency response:
10Hz ~ 20kHz ± 1dB @fs44.1kHz, +4dBu, 10k ohm
10Hz ~ 22kHz ± 1dB @fs48kHz, +4dBu, 10k ohm
10Hz ~ 44kHz ± 1dB @fs96kHz, +4dBu, 10k ohm
S/N: TBD
Dynamic range: TBD
A/D conversion: 24 bit, 64 times oversampling
Sampling frequency: 44.1kHz, 48kHz, 96kHz
Analog outputs:
Connector: XLR-3-32 type, 1/4" TRS phone jack (balanced)
Output impedance: 150 ohm
Standard output level: +4dBu
Max. output level: +16dBu
Impedance: over 10k ohm
Digital outputs:
Connector: Optical, Coaxial
Format: 24bit S/P DIF (IEC60958, EIAJ CP-1201)
General:
Dimensions:
8.82" (W) x 6.97" (D) x 3.46" (H)
224 (W) x 177 (D) x 88 (H)mm
Weight: 2.93 lbs. / 1.3 kg
Accessories: AC power supply, Owners? manual | Vacuum Tube Mic Preamp. 12AX7 Vacuum Tube. +48V Phantom Power, 20dB Pad.
This premium tube mic/line preamp features an integrated limiter for studio,
live and hard disk recording applications. It features a carefully-selected
12AX7 vacuum tube with Behringer's UTC technology for exceptional warmth
and lowest noise. Using the MIC100 is a great way to eliminate the "dull"
sound of standard digital recorders & sound cards. Also, it perfectly
complements studio-grade condenser mics. When used as a high-end DI-box,
it ensures outstanding signal integrity. Features also include a phase reverse
switch, +48 V phantom power, a 20 dB pad, and balanced I/O.
The heart of the Tube Untragain is an extremely low-noise microphone preamp
circuitry that uses discrete components and produces a highly trans-parent
sound. In combination with Behringer's tube technology, the operational amplifiers
4580 and a sophisticated circuit topology, the Tube Untragain yields excellent
noise and distortion properties. The innovative UTC circuitry that has been developed
by our engineering team offers an abundance of sound-shaping possibilities.
Absolute musicality was Behringer's major goal when we designed the Tube
Untragain. The result is a device that, thanks to our tube circuitry, lends an
incredible punch to percussion instruments. On the other hand, instruments
that are rich in upper harmonics will receive more transparency. The sound
will be warm, detailed and brilliant.
Technical Description
Specifications
XLR input Connector: Balanced/unbalanced
Type: Transformerless, DC-decoupled input
Impedance: Approx. 2 kOhms
Maximum input level: +7 dBu / 20 dB with pad
1/4 in. TRS input Connector: Balanced/unbalanced
Type: Transformerless, DC-decoupled input
Impedance: Approx. 1 MOhms
Maximum input level: +16 dBu / 20 dB with pad
Audio outputs Connectors: XLR and 1/4 in. TRS connector balanced/unbalanced
Type: Transformerless, DC-decoupled output
Impedance:
Approx. 700 Ohms balanced
Approx. 350 Ohms unbalanced
Maximum output level: Approx. +26 dBu @ 100 k§?
System Frequency Response Mic input: |
Behringer MIC-2200 2-Channel Tube Microphone Preamplifier-Line Driver-DI Box The MIC2200 is the ideal extension to your console, MIDI setup or hard disk recording system. Its integrated parametric EQ?s give you extra sound-shaping power, while its built-in tube adds warmth and transparency to your signal. In addition, the ULTRAGAIN PRO features direct injection and level conversion functionality.
|
Features
Superlative sound
Studio quality mic preamp
Total control - Input Gain, EQ contour, Output Gain,
Overload indicator
Multiple output connectors
XLR/jack combo input
Switchable 48 V DC Phantom Power for condenser Mics
Compact, computer friendly package
Needs no external power supply
ARX is proud to introduce the e-pre - the ultimate microphone pre-amp for
hard disk recording, designed by audio professionals, not computer engineers.
The all-new e-pre is so much a part of your system that it fits right into a spare
5?" slot in your computer case! It's the perfect tool for all your day-to-day
recording requirements. No equipment racks to plug in, no masses of cabling to
connect - the e-pre is ready and waiting when you need it.
The e-pre is a studio quality microphone pre-amp using the same internal components
as high end mixing consoles, built into a compact, computer friendly package.
It has controls for:
Input Gain - fully variable from 10dB through to 60dB to suit all types of microphones,
plus switchable 48 V Phantom Power to enable condenser microphones to deliver
their best.
A Contour control for EQ sweetening, providing fast, easy access to a whole range
of useful EQ curves
Output level control - fully variable to match the e-pre's output to the input of the sound
card. From -10dB consumer cards through to +4dB for professional sound cards, the
e-pre can handle it.
Multiple output connectors match up with any kind of sound card, including mini jacks,
standard jack, RCA (phono) plugs, and even a connector to link to the internal CD ROM
audio input of your sound card (if fitted).
We've even fitted a 12 VDC input connector on the rear to enable the e-pre to run from an
external power supply if required (eg for use with notebook computers or stand-alone use).
Any way you look at it, the e-pre by ARX is the total professional microphone pre-amp for
all your hard disk recording needs
e-pre Benefits
Professional Balanced XLR mic input
True 48v phantom power
Runs into the Line input of ANY sound card - uses the card you've already paid for
High headroom = clean recordings
Smart EQ
Compatible with non-computer audio equipment
Professional performance and specs in a user friendly package
T E C H N I C A L S P E C I F I C A T I O N S
Input Impedance
Mic 2 K Ohms Balanced; XLR type Pin 1 Audio Ground, Pin 2 +, Pin 3-
Line 25 K Ohms Balanced, ?" TRS jack Tip +, Ring , Sleeve Audio Ground
Phantom Power Voltage Switchable +48 V DC on XLR Pins 2 and 3
Max Input Level Mic +15 dB, Line +20 dB
Input Gain 10 dB Minimum, variable to 60 dB Maximum
Output Level -10 dB variable through 0 dB to +4 dB
Overload Indicator Measured at all Gain points throughout the circuitry
Output Noise -90 dB Unweighted, -97 dB 'A' weighted
(Measured with Gain nominal 20 dB, Output level -10 dB)
Frequency Response 20 - 20 KHz ± 0.25 dB
Distortion
100 Hz 0.0085%
1 KHz 0.008%
10 KHz 0.0083%
(Measured with Mic Gain 20 dB, Output 0 dB)
Power Requirements 12 V DC from either computer supply or external supply
(external power supply not included in e-pre package)
Size 148mmW x 42mmH x 150mm D (5?“W x 1?H x 6“D)
Weight Under 1 Kilo (2.2 lbs)
|
The PreSonus HP60 is the most flexible and advanced headphone amplifier system available for professional and project recording studios as well as live sound in-ear monitoring systems. Loaded with six independent,
loud and clear headphone amplifiers, the HP60 features dual stereo inputs as well as external input, for each
channel allowing you to mix between three stereo audio streams (mix A, mix B, and external input). Stereo output is also available on each channel to send line level headphone channel mixes to additional headphone amplifiers or monitor systems. Each channel features headphone level, mix control between A and B inputs, external input volume, mute and mono. The HP60 also features talkback via external XLR microphone input. Common set up of the HP60 in a recording session is to send the main control room mix to input A. Send the click track to input B. Send the each band member direct recording input to each channelʼs external input (more me). This will allow each band member to create a mix between the main mix, the click track and themselves. The HP60 is the ultimate headphone amplification system delivering loud and clear headphone mixes for real-world recording situations.
Features:
-Six independent ultra low noise, high output headphone amplifiers (150 mW per channel)
-Two sets of stereo inputs (A and B) with balanced TRS connectors
-Stereo external input point on each channel for "more me” with trim control
-Mix control between inputs A and B
-Talkback with external XLR microphone with control
-Direct stereo line output on each channel
|
Input A
|
(2) ¼” TRS balanced 10 Ohms
| |
Input B
|
(2) ¼” TRS balanced 10 Ohms
| |
External input
|
TRS stereo unbalanced 10 Ohms
| |
Headphone amplifier output power
|
150 mW RMS (60 Ohms) per channel
| |
Audio outputs
|
¼” TRS stereo unbalanced per channel
| |
Master controls
|
Talk button, Talkback volume, Input A, Input B
| |
Channel controls
|
Headphone level, Mix A/B control, External input level, Mono, Mute
| |
External talkback
|
XLR with TS external control jack
| |
Power
|
IEC 110V-240V internal switching
|
|
The CPR12 is an easy to use, flexible and multifunctional 10 channel pre-amplifier. Six of these input channels are selectable between Mic / Line level and equipped with a 3 band tone control. The first two can be switched to priority and phantom power. The other four channels are direct line inputs. Every input channel has its own gain and fader volume control with PFL button which makes it possible to pre-listen each input or output channel with the built-in pre-listening speaker, and can be routed to one or both output channels. This makes the CPR12 a full two-zone system. Other present features are a priority input, a recording output, separate sub-out channels and the 24 V DC emergency power connection. This last feature makes it possible to power the CPR12 with emergency power when the main power is shut down. In this case, the priority input will automatically mute all input signals, and a evacuation message will be announced. The steel 19" housing has a height of 2 HE. ![]()
- 10 audio input sources
- 6 Mic / Line inputs with 3 band EQ
- 4 Direct Line Inputs
- Fader volume control
- Two output zones
- Built-in pre-listening speaker
- Priority input for emergency situations
- + 15 V DC Phantom power
- Works on 24 V DC emergency power
Specifications
- Model Name / Type: CPR12 / 10 channel 2 zone pre-amplifier
- THD+N:
- Signal/Noise: > 90 dB
- Frequency Response: 20 Hz - 20 kHz
- Phantom Power: + 15 V DC
- Emergency Power: + 24 V DC
- Power Supply: 100 - 240 V AC / 50 - 60 Hz
- Dimensions (W x H x D): 420 x 88 x 320 mm
|
Reviews
There are no reviews yet.