INPUT: 4 balanced +4dBu/50kΩ on female XLR connectors; 4 unbalanced 1Vpp/50kΩ on RCA connectors.
OUTPUT: 4 unbalanced 1Vpp/49Ω on RCA connectors; 4 balanced +4dBu/49Ω on male XLR connectors.
MAX. OUTPUT: 18Vpp.
BANDWIDTH (-3dB): 30kHz.
S/N RATIO: Better than 89dB.
THD: Less than 0.02%.
POWER SOURCE: 115-230V AC, 50/60Hz, 3.7VA.
DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable.
WEIGHT: 2.4kg (5.3lbs) approx.
ACCESSORIES: Power cord.
WDT 24 is a wireless transmitter in the operating free band ISM 2.4 GHz, which has been designed to work with the wireless receiver WDR 24, creating a digital audio wireless system.
The transmitter WDT 24 can work with one receiver, or with up to 10 receivers WDR 24, covering a distance of more than 30 metres in open places.
Wireless Digital Audio Transmitter System
Operating Band ISM 2.4GHz (free band).
One transmitter WDT 24 paired with one receiver WDR 24, or one transmitter WDT 24 paired with up to ten receivers WDR 24.
GFSK digital modulation/demodulation.
External antenna can help to increase the transmission distance.
Intelligent Frequency Hoping can help to avoid interference effectively and to ensure the channel quality.
Automatic mute in bad channel quality conditions or high error code rate.
Transmission distance higher than 30 meters in open places.
Up to three transmitters WDT 24 in a zone
Balanced XLR and ¼\'\' jack inputs.
Working mode: stereo or mono
Power Supply
AC 9V-500 mA 50/60 Hz
Frequency
2404-2476MHz
Channel
25
Modulation/Demodulation
GFSK
Receive Sensitivity (WDR 24)
-84dBm (min.)
Transmitted Power (WDT 24)
6 dBm
Output Level (WDR 24)
+13dBu (BAL max.)
Input Level (WDT 24)
+5dBu (max.)
Bandwidth
>=1.8 MHz
Frequency Response
20Hz - 20kHz, +3dB / -3dB
S/N
>80 dB
Dynamic Range @ 1 kHz
>90 dB
Crosstalk @ 1kHz
>90 dB
THD
The Soundweb London BLU-101 offers a fixed configuration of 12 analog inputs and 8 analog outputs, configurable signal processing, AEC processing, and a high bandwidth, fault tolerant digital audio bus.
The BLU-101 has open architecture which is fully configurable through HiQnet™ London Architect. A rich palette of processing and logic objects and a "drag and drop” method of configuration provide a simple and familiar design environment.
The BLU-101 contains dedicated AEC processing for up to 12 independent AEC algorithms. The AEC algorithm can be applied to signals coming from the local analog inputs or from the digital audio bus. 12 individual AEC references (one per algorithm) allow the user to provide a solution for multiple conferencing spaces using a single device.
Automatic Gain Control (AGC) and Noise Cancellation (NC) are also provided per AEC algorithm. AGC ensures that microphone levels remain at an optimum level, and NC removes steady state noise (such as from a projector fan or air conditioning device) from the signal path.
This processor features a low latency, fault tolerant digital audio bus of 48 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 40km.
The BLU-101 is compatible with the entire Soundweb London family and its 48 channel digital audio bus represents channels 1-48 of the larger 256 channel digital audio bus when integrated with the BLU-800, BLU-320, BLU-160, BLU-120, BLU-BIB and BLU-BOB devices.
Analog Inputs provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel.
Phantom Power, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication. A bi-directional locate function allows devices to be identified both from and within HiQnet London Architect.
12 Control Inputs and 6 Logic Outputs allow the BLU-101 to be integrated with GPIO compatible devices. The Soundweb London Interface Kit, comprehensive documentation which details how Soundweb London systems can be integrated with third party control systems, is included within the installation of HiQnet London Architect.
The BLU-101 and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.
Key Features:
• 12 Analog Inputs (with 48v Phantom Power per Channel)
• 8 Analog Outputs
• Configurable Signal Processing
• 12 Channels of AEC Processing with Auto Gain Control and Noise Cancellation
• Rich Palette of Processing and Logic Objects
• 48 Channel, Low Latency, Fault Tolerant Digital Audio Bus
• Clear Front Panel LED Indication
• Bi-Directional Locate Functionality
• 12 Control Inputs and 6 Logic Outputs for GPIO Integration
• Soundweb London Interface Kit for Third Party Control System Integration (Documentation)
• HiQnet Device
• Configuration, Control and Monitoring from HiQnet London Architect
WDR 24 is a wireless receiver in the operating free band ISM 2.4 GHz, which has been designed to work with the transmitter WDT 24, creating a digital audio wireless system.
The transmitter WDT 24 can work with one receiver, or with up to 10 receivers WDR 24, covering a distance of more than 30 metres in open places.
Wireless Digital Audio Receiver System
Operating Band ISM 2.4GHz (free band).
One transmitter WDT 24 paired with one receiver WDR 24, or one transmitter WDT 24 paired with up to ten receivers WDR 24.
GFSK digital modulation/demodulation.
External antenna can help to increase the transmission distance.
Intelligent Frequency Hoping can help to avoid interference effectively and to ensure the channel quality.
Automatic mute in bad channel quality conditions or high error code rate.
Transmission distance higher than 30 meters in open places.
Up to three transmitters WDT 24 in a zone
Balanced XLR and unbalanced ¼\'\' jack outputs
Working mode: stereo or mono
Power Supply
AC 9V-500 mA 50/60 Hz
Frequency
2404-2476MHz
Channel
25
Modulation/Demodulation
GFSK
Receive Sensitivity (WDR 24)
-84dBm (min.)
Transmitted Power (WDT 24)
6 dBm
Output Level (WDR 24)
+13dBu (BAL max.)
Input Level (WDT 24)
+5dBu (max.)
Bandwidth
>=1.8 MHz
Frequency Response
20Hz - 20kHz, +3dB / -3dB
S/N
>80 dB
Dynamic Range @ 1 kHz
>90 dB
Crosstalk @ 1kHz
>90 dB
THD
An elegant slim-line device contains all the functions required by a system for distributing different musical programmes in homes for multi-room sound systems and commercial premises.
Three different musical programmes and one for paging can be transmitted in five mono zones, or alternatively four zones, one of which is in stereo. It is also possible to extend the number of zones to ten using a simple connector to interlink two systems. The system has five amplified 20 W / 4 ohm outputs. For each of the five zones, a direct auxiliary input is available for connecting sources such as CD players or mixers to be used exclusively for one zone/room.
The back-lit display and function keys make it possible to access all the menus for configuring and adjusting the system: Volume, Tone, Loudness, Output settings, VOX.
Features
3 Music Source Inputs individually selectable to each output
One Input Source with Override facility (Jukebox or Auto Announcer)
5 zoned outputs (Mono) or 1 Stereo and 3 Mono Output Zones
Can be expanded interlink of two or more MS520 units
Full Digital Matrix control of functions to all 5 zones
Up to 10 remote control panels RC 62 can be connected to each MS 520
AMPLIFIER SPECIFICATIONS
Power output:
5 x 20
Watt rms
Frequency Response (Music):
30 ÷ 45
Hz ÷ kHz
Frequency Response (Direct):
30 ÷ 45
Hz ÷ kHz
Frequency Response (Paging):
200 ÷ 18
Hz ÷ kHz
Distortion:
0.5
%
Signal / noise ratio (Music):
-78
dB
Signal / noise ratio (Direct):
-78
dB
Signal / noise ratio (Paging):
-60
dB
INPUT SECTION
Input sensitivity (Music):
-16
dBu
Input sensitivity (Direct):
-16
dBu
Input sensitivity (Paging - Line):
- 43 ÷ -27
dBu
Input sensitivity (Paging - Mic):
- 58 ÷ -41
dBu
Bass Tone:
(100 kHz) ± 8
dB
Treble Tone:
(12.5 kHz) ± 8
dB
OUTPUT SECTION
Out level:
-6 / -10
dB
Protections:
Short ciurcuit, thermal, AC / DC fuses
Power supply:
16
V dc
POWER REQUIREMENT
Operating voltage:
220÷240 / 110÷120 V ~ 50 / 60 Hz
V ~ Hz
Power (consumption):
370
W
Max. Available power:
100
W
PHISICAL SPECIFICATION
Width:
438 / 17.24
mm/inch
Height:
44 / 1.73
mm/inch
Depth:
253 / 9.96
mm/inch
Net Weight:
3.66 / 8.06
Kg/Lbs
SHIPPING INFORMATION
Package height:
75 / 2.95
mm/inch
Package width:
520 / 20.47
mm/inch
Package depth:
280 / 11.02
mm/inch
Shipping Weight:
4.18 / 9.21
Kg/Lbs
Product Features:
16 MIDAS-designed, fully programmable mic preamps for audiophile sound quality
8 analog, servo-balanced XLR outputs
AES50 network ports featuring KLARK TEKNIKʼs SuperMAC networking capability for ultra-low jitter and latency
Up to 100 m networking capability via CAT-5e cable (not included)
Dual AES50 ports for cascading S16 units—no merger or router required
Precise LED metering plus 7-segment displays for signal control on stage
Phones output assignable to any of the inputs/outputs for on-stage monitoring
Connectivity for BEHRINGER's P-16 Personal Monitoring System for In-Ear applications (not included)
Dual ADAT outputs for use in splitter mode and stand-alone digital multicore applications
MIDI In/Out for bi-directional communication between FOH console and on-stage MIDI devices
USB connector for system updates via PC
"Planet Earth" switching power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
"Built like a tank" yet compact, all-steel 2U rack-mount chassis
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
KLARK TEKNIK AES50
KLARK TEKNIK SuperMAC (AES50-Compliant) technology gives the S16 its high-capacity digital interconnectivity with ultra-low latency operation, as well as superbly simple deployment and ease of use. KLARK TEKNIK engineers worked hand-in-hand with BEHRINGER product developers to ensure the S16 meets, or exceeds, the requirements of live performance entertainers and their professional audio engineers. Some of the outstanding features are:
48 bidirectional audio channels over CAT5 cable (48 kHz)
24 bidirectional audio channels over CAT5 cable (96 kHz)
Single cable duplex interconnection for audio and sample clocks
Ethernet physical layer audio data transmission
High channel count and ultra-low deterministic latency
Accurate phase-aligned clock distribution.
Comprehensive error detection
and management
Provision for redundant networking
Minimal configuration ñ total ease of deployment and use
Ethernet TCP/IP protocol-compatible auxiliary data channel
Royalty-free implementations available as Xilinx FPGA cores
OEM modules available from developer partners
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.